diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom/msm8996-v3-auto-adp.dts')
-rw-r--r-- | arch/arm/boot/dts/qcom/msm8996-v3-auto-adp.dts | 160 |
1 files changed, 160 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom/msm8996-v3-auto-adp.dts b/arch/arm/boot/dts/qcom/msm8996-v3-auto-adp.dts new file mode 100644 index 000000000000..1a93c692c58c --- /dev/null +++ b/arch/arm/boot/dts/qcom/msm8996-v3-auto-adp.dts @@ -0,0 +1,160 @@ +/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "msm8996-v3.dtsi" +#include "msm8996-pm8994.dtsi" +#include "msm8996-agave-adp.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. MSM 8996 v3 AUTO ADP"; + compatible = "qcom,msm8996-adp", "qcom,msm8996", "qcom,adp"; + qcom,msm-id = <310 0x30001>; + qcom,board-id = <0x02010019 0>; +}; + +&spi_9 { + status = "ok"; + can-controller@0 { + compatible = "renesas,rh850"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <122 0>; + spi-max-frequency = <5000000>; + }; +}; + +&soc { + qcom,msm-ssc-sensors { + status = "disabled"; + }; +}; + +&pil_modem { + pinctrl-names = "default"; + pinctrl-0 = <&modem_mux>; +}; + +&slim_msm { + status = "disabled"; +}; + +&pm8994_mpps { + mpp@a500 { /* MPP 6 */ + qcom,mode = <1>; /* Digital output */ + qcom,output-type = <0>; /* CMOS logic */ + qcom,vin-sel = <2>; /* S4 1.8V */ + qcom,src-sel = <0>; /* Constant */ + qcom,master-en = <1>; /* Enable GPIO */ + status = "okay"; + }; +}; + +&hl7509_en_vreg { + status = "ok"; +}; + +&hl7509_vreg { + status = "ok"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on_sbc>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off + &sdc2_cd_on_sbc>; +}; + +&i2c_7 { + silabs4705@11 { /* SiLabs FM chip, slave id 0x11*/ + status = "disabled"; + }; +}; + +&gfx_cpr { + vdd-supply = <&hl7509_vreg>; + qcom,cpr-step-quot-init-min = <20>; + qcom,cpr-step-quot-init-max = <26>; + qcom,voltage-step = <10000>; + /delete-property/ qcom,cpr-enable; +}; + +&gfx_vreg { + qcom,cpr-voltage-ceiling = + <600000 670000 670000 750000 830000 + 910000 960000 1020000>; + qcom,cpr-voltage-floor = + <600000 600000 600000 600000 600000 + 600000 600000 600000>; +}; + +&pm8994_l3 { + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <875000>; + qcom,init-voltage = <875000>; +}; + +&pm8994_l11 { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + qcom,init-voltage = <850000>; +}; + +&pm8994_l17 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; +}; + +&pm8994_l23 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,init-voltage = <1100000>; +}; + +&pm8994_l27 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + qcom,init-voltage = <800000>; +}; + +&pm8994_l29 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + qcom,init-voltage = <2500000>; +}; + +&rpm_bus { + rpm-regulator-ldoa26 { + /delete-node/ pm8994_l26_corner; + /delete-node/ pm8994_l26_floor_corner; + + pm8994_l26: regulator-l26 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,init-voltage = <1100000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa31 { + status = "okay"; + pm8994_l31: regulator-l31 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,init-voltage = <1100000>; + status = "okay"; + }; + }; +}; |