diff options
Diffstat (limited to 'arch/arm/boot/dts/gemini-sl93512r.dts')
| -rw-r--r-- | arch/arm/boot/dts/gemini-sl93512r.dts | 56 |
1 files changed, 16 insertions, 40 deletions
diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts index 2bb953440793..a98af0351906 100644 --- a/arch/arm/boot/dts/gemini-sl93512r.dts +++ b/arch/arm/boot/dts/gemini-sl93512r.dts @@ -24,7 +24,7 @@ }; chosen { - bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait"; + bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait"; stdout-path = &uart0; }; @@ -36,8 +36,8 @@ wakeup-source; linux,code = <KEY_WPS_BUTTON>; label = "WPS"; - /* Conflict with NAND flash */ - gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + /* Conflicts with TVC and extended flash */ + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; }; button-setup { @@ -143,54 +143,30 @@ /* 16MB of flash */ reg = <0x30000000 0x01000000>; - partition@0 { - label = "BOOT"; - reg = <0x00000000 0x00020000>; - read-only; - }; - partition@120000 { - label = "Kern"; - reg = <0x00020000 0x00300000>; - }; - partition@320000 { - label = "Ramdisk"; - reg = <0x00320000 0x00600000>; - }; - partition@920000 { - label = "Application"; - reg = <0x00920000 0x00600000>; - }; - partition@f20000 { - label = "VCTL"; - reg = <0x00f20000 0x00020000>; - read-only; - }; - partition@f40000 { - label = "CurConf"; - reg = <0x00f40000 0x000a0000>; - read-only; - }; - partition@fe0000 { - label = "FIS directory"; - reg = <0x00fe0000 0x00020000>; - read-only; + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0xfe0000 */ + fis-index-block = <0x1fc>; }; }; syscon: syscon@40000000 { pinctrl { /* - * gpio0egrp cover line 16 used by HD LED - * gpio0fgrp cover line 17, 18 used by wireless LED and reset button - * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY - * gpio0kgrp cover line 31 used by USB LED + * gpio0agrp cover line 0, used by WPS button + * gpio0fgrp cover line 16 used by HD LED + * gpio0ggrp cover line 17, 18 used by wireless LAN LED and + * reset button OR USB ID select on 17 and USB VBUS select + * on 18. (Confusing.) + * gpio0igrp cover line 21, 22 used by MDIO for Marvell PHY */ gpio0_default_pins: pinctrl-gpio0 { mux { function = "gpio0"; - groups = "gpio0egrp", + groups = "gpio0agrp", "gpio0fgrp", - "gpio0hgrp"; + "gpio0ggrp", + "gpio0igrp"; }; }; /* |