aboutsummaryrefslogtreecommitdiff
path: root/Documentation/livepatch/livepatch.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/livepatch/livepatch.rst')
-rw-r--r--Documentation/livepatch/livepatch.rst461
1 files changed, 461 insertions, 0 deletions
diff --git a/Documentation/livepatch/livepatch.rst b/Documentation/livepatch/livepatch.rst
new file mode 100644
index 000000000000..c2c598c4ead8
--- /dev/null
+++ b/Documentation/livepatch/livepatch.rst
@@ -0,0 +1,461 @@
+=========
+Livepatch
+=========
+
+This document outlines basic information about kernel livepatching.
+
+.. Table of Contents:
+
+ 1. Motivation
+ 2. Kprobes, Ftrace, Livepatching
+ 3. Consistency model
+ 4. Livepatch module
+ 4.1. New functions
+ 4.2. Metadata
+ 5. Livepatch life-cycle
+ 5.1. Loading
+ 5.2. Enabling
+ 5.3. Replacing
+ 5.4. Disabling
+ 5.5. Removing
+ 6. Sysfs
+ 7. Limitations
+
+
+1. Motivation
+=============
+
+There are many situations where users are reluctant to reboot a system. It may
+be because their system is performing complex scientific computations or under
+heavy load during peak usage. In addition to keeping systems up and running,
+users want to also have a stable and secure system. Livepatching gives users
+both by allowing for function calls to be redirected; thus, fixing critical
+functions without a system reboot.
+
+
+2. Kprobes, Ftrace, Livepatching
+================================
+
+There are multiple mechanisms in the Linux kernel that are directly related
+to redirection of code execution; namely: kernel probes, function tracing,
+and livepatching:
+
+ - The kernel probes are the most generic. The code can be redirected by
+ putting a breakpoint instruction instead of any instruction.
+
+ - The function tracer calls the code from a predefined location that is
+ close to the function entry point. This location is generated by the
+ compiler using the '-pg' gcc option.
+
+ - Livepatching typically needs to redirect the code at the very beginning
+ of the function entry before the function parameters or the stack
+ are in any way modified.
+
+All three approaches need to modify the existing code at runtime. Therefore
+they need to be aware of each other and not step over each other's toes.
+Most of these problems are solved by using the dynamic ftrace framework as
+a base. A Kprobe is registered as a ftrace handler when the function entry
+is probed, see CONFIG_KPROBES_ON_FTRACE. Also an alternative function from
+a live patch is called with the help of a custom ftrace handler. But there are
+some limitations, see below.
+
+
+3. Consistency model
+====================
+
+Functions are there for a reason. They take some input parameters, get or
+release locks, read, process, and even write some data in a defined way,
+have return values. In other words, each function has a defined semantic.
+
+Many fixes do not change the semantic of the modified functions. For
+example, they add a NULL pointer or a boundary check, fix a race by adding
+a missing memory barrier, or add some locking around a critical section.
+Most of these changes are self contained and the function presents itself
+the same way to the rest of the system. In this case, the functions might
+be updated independently one by one.
+
+But there are more complex fixes. For example, a patch might change
+ordering of locking in multiple functions at the same time. Or a patch
+might exchange meaning of some temporary structures and update
+all the relevant functions. In this case, the affected unit
+(thread, whole kernel) need to start using all new versions of
+the functions at the same time. Also the switch must happen only
+when it is safe to do so, e.g. when the affected locks are released
+or no data are stored in the modified structures at the moment.
+
+The theory about how to apply functions a safe way is rather complex.
+The aim is to define a so-called consistency model. It attempts to define
+conditions when the new implementation could be used so that the system
+stays consistent.
+
+Livepatch has a consistency model which is a hybrid of kGraft and
+kpatch: it uses kGraft's per-task consistency and syscall barrier
+switching combined with kpatch's stack trace switching. There are also
+a number of fallback options which make it quite flexible.
+
+Patches are applied on a per-task basis, when the task is deemed safe to
+switch over. When a patch is enabled, livepatch enters into a
+transition state where tasks are converging to the patched state.
+Usually this transition state can complete in a few seconds. The same
+sequence occurs when a patch is disabled, except the tasks converge from
+the patched state to the unpatched state.
+
+An interrupt handler inherits the patched state of the task it
+interrupts. The same is true for forked tasks: the child inherits the
+patched state of the parent.
+
+Livepatch uses several complementary approaches to determine when it's
+safe to patch tasks:
+
+1. The first and most effective approach is stack checking of sleeping
+ tasks. If no affected functions are on the stack of a given task,
+ the task is patched. In most cases this will patch most or all of
+ the tasks on the first try. Otherwise it'll keep trying
+ periodically. This option is only available if the architecture has
+ reliable stacks (HAVE_RELIABLE_STACKTRACE).
+
+2. The second approach, if needed, is kernel exit switching. A
+ task is switched when it returns to user space from a system call, a
+ user space IRQ, or a signal. It's useful in the following cases:
+
+ a) Patching I/O-bound user tasks which are sleeping on an affected
+ function. In this case you have to send SIGSTOP and SIGCONT to
+ force it to exit the kernel and be patched.
+ b) Patching CPU-bound user tasks. If the task is highly CPU-bound
+ then it will get patched the next time it gets interrupted by an
+ IRQ.
+
+3. For idle "swapper" tasks, since they don't ever exit the kernel, they
+ instead have a klp_update_patch_state() call in the idle loop which
+ allows them to be patched before the CPU enters the idle state.
+
+ (Note there's not yet such an approach for kthreads.)
+
+Architectures which don't have HAVE_RELIABLE_STACKTRACE solely rely on
+the second approach. It's highly likely that some tasks may still be
+running with an old version of the function, until that function
+returns. In this case you would have to signal the tasks. This
+especially applies to kthreads. They may not be woken up and would need
+to be forced. See below for more information.
+
+Unless we can come up with another way to patch kthreads, architectures
+without HAVE_RELIABLE_STACKTRACE are not considered fully supported by
+the kernel livepatching.
+
+The /sys/kernel/livepatch/<patch>/transition file shows whether a patch
+is in transition. Only a single patch can be in transition at a given
+time. A patch can remain in transition indefinitely, if any of the tasks
+are stuck in the initial patch state.
+
+A transition can be reversed and effectively canceled by writing the
+opposite value to the /sys/kernel/livepatch/<patch>/enabled file while
+the transition is in progress. Then all the tasks will attempt to
+converge back to the original patch state.
+
+There's also a /proc/<pid>/patch_state file which can be used to
+determine which tasks are blocking completion of a patching operation.
+If a patch is in transition, this file shows 0 to indicate the task is
+unpatched and 1 to indicate it's patched. Otherwise, if no patch is in
+transition, it shows -1. Any tasks which are blocking the transition
+can be signaled with SIGSTOP and SIGCONT to force them to change their
+patched state. This may be harmful to the system though. Sending a fake signal
+to all remaining blocking tasks is a better alternative. No proper signal is
+actually delivered (there is no data in signal pending structures). Tasks are
+interrupted or woken up, and forced to change their patched state. The fake
+signal is automatically sent every 15 seconds.
+
+Administrator can also affect a transition through
+/sys/kernel/livepatch/<patch>/force attribute. Writing 1 there clears
+TIF_PATCH_PENDING flag of all tasks and thus forces the tasks to the patched
+state. Important note! The force attribute is intended for cases when the
+transition gets stuck for a long time because of a blocking task. Administrator
+is expected to collect all necessary data (namely stack traces of such blocking
+tasks) and request a clearance from a patch distributor to force the transition.
+Unauthorized usage may cause harm to the system. It depends on the nature of the
+patch, which functions are (un)patched, and which functions the blocking tasks
+are sleeping in (/proc/<pid>/stack may help here). Removal (rmmod) of patch
+modules is permanently disabled when the force feature is used. It cannot be
+guaranteed there is no task sleeping in such module. It implies unbounded
+reference count if a patch module is disabled and enabled in a loop.
+
+Moreover, the usage of force may also affect future applications of live
+patches and cause even more harm to the system. Administrator should first
+consider to simply cancel a transition (see above). If force is used, reboot
+should be planned and no more live patches applied.
+
+3.1 Adding consistency model support to new architectures
+---------------------------------------------------------
+
+For adding consistency model support to new architectures, there are a
+few options:
+
+1) Add CONFIG_HAVE_RELIABLE_STACKTRACE. This means porting objtool, and
+ for non-DWARF unwinders, also making sure there's a way for the stack
+ tracing code to detect interrupts on the stack.
+
+2) Alternatively, ensure that every kthread has a call to
+ klp_update_patch_state() in a safe location. Kthreads are typically
+ in an infinite loop which does some action repeatedly. The safe
+ location to switch the kthread's patch state would be at a designated
+ point in the loop where there are no locks taken and all data
+ structures are in a well-defined state.
+
+ The location is clear when using workqueues or the kthread worker
+ API. These kthreads process independent actions in a generic loop.
+
+ It's much more complicated with kthreads which have a custom loop.
+ There the safe location must be carefully selected on a case-by-case
+ basis.
+
+ In that case, arches without HAVE_RELIABLE_STACKTRACE would still be
+ able to use the non-stack-checking parts of the consistency model:
+
+ a) patching user tasks when they cross the kernel/user space
+ boundary; and
+
+ b) patching kthreads and idle tasks at their designated patch points.
+
+ This option isn't as good as option 1 because it requires signaling
+ user tasks and waking kthreads to patch them. But it could still be
+ a good backup option for those architectures which don't have
+ reliable stack traces yet.
+
+
+4. Livepatch module
+===================
+
+Livepatches are distributed using kernel modules, see
+samples/livepatch/livepatch-sample.c.
+
+The module includes a new implementation of functions that we want
+to replace. In addition, it defines some structures describing the
+relation between the original and the new implementation. Then there
+is code that makes the kernel start using the new code when the livepatch
+module is loaded. Also there is code that cleans up before the
+livepatch module is removed. All this is explained in more details in
+the next sections.
+
+
+4.1. New functions
+------------------
+
+New versions of functions are typically just copied from the original
+sources. A good practice is to add a prefix to the names so that they
+can be distinguished from the original ones, e.g. in a backtrace. Also
+they can be declared as static because they are not called directly
+and do not need the global visibility.
+
+The patch contains only functions that are really modified. But they
+might want to access functions or data from the original source file
+that may only be locally accessible. This can be solved by a special
+relocation section in the generated livepatch module, see
+Documentation/livepatch/module-elf-format.rst for more details.
+
+
+4.2. Metadata
+-------------
+
+The patch is described by several structures that split the information
+into three levels:
+
+ - struct klp_func is defined for each patched function. It describes
+ the relation between the original and the new implementation of a
+ particular function.
+
+ The structure includes the name, as a string, of the original function.
+ The function address is found via kallsyms at runtime.
+
+ Then it includes the address of the new function. It is defined
+ directly by assigning the function pointer. Note that the new
+ function is typically defined in the same source file.
+
+ As an optional parameter, the symbol position in the kallsyms database can
+ be used to disambiguate functions of the same name. This is not the
+ absolute position in the database, but rather the order it has been found
+ only for a particular object ( vmlinux or a kernel module ). Note that
+ kallsyms allows for searching symbols according to the object name.
+
+ - struct klp_object defines an array of patched functions (struct
+ klp_func) in the same object. Where the object is either vmlinux
+ (NULL) or a module name.
+
+ The structure helps to group and handle functions for each object
+ together. Note that patched modules might be loaded later than
+ the patch itself and the relevant functions might be patched
+ only when they are available.
+
+
+ - struct klp_patch defines an array of patched objects (struct
+ klp_object).
+
+ This structure handles all patched functions consistently and eventually,
+ synchronously. The whole patch is applied only when all patched
+ symbols are found. The only exception are symbols from objects
+ (kernel modules) that have not been loaded yet.
+
+ For more details on how the patch is applied on a per-task basis,
+ see the "Consistency model" section.
+
+
+5. Livepatch life-cycle
+=======================
+
+Livepatching can be described by five basic operations:
+loading, enabling, replacing, disabling, removing.
+
+Where the replacing and the disabling operations are mutually
+exclusive. They have the same result for the given patch but
+not for the system.
+
+
+5.1. Loading
+------------
+
+The only reasonable way is to enable the patch when the livepatch kernel
+module is being loaded. For this, klp_enable_patch() has to be called
+in the module_init() callback. There are two main reasons:
+
+First, only the module has an easy access to the related struct klp_patch.
+
+Second, the error code might be used to refuse loading the module when
+the patch cannot get enabled.
+
+
+5.2. Enabling
+-------------
+
+The livepatch gets enabled by calling klp_enable_patch() from
+the module_init() callback. The system will start using the new
+implementation of the patched functions at this stage.
+
+First, the addresses of the patched functions are found according to their
+names. The special relocations, mentioned in the section "New functions",
+are applied. The relevant entries are created under
+/sys/kernel/livepatch/<name>. The patch is rejected when any above
+operation fails.
+
+Second, livepatch enters into a transition state where tasks are converging
+to the patched state. If an original function is patched for the first
+time, a function specific struct klp_ops is created and an universal
+ftrace handler is registered\ [#]_. This stage is indicated by a value of '1'
+in /sys/kernel/livepatch/<name>/transition. For more information about
+this process, see the "Consistency model" section.
+
+Finally, once all tasks have been patched, the 'transition' value changes
+to '0'.
+
+.. [#]
+
+ Note that functions might be patched multiple times. The ftrace handler
+ is registered only once for a given function. Further patches just add
+ an entry to the list (see field `func_stack`) of the struct klp_ops.
+ The right implementation is selected by the ftrace handler, see
+ the "Consistency model" section.
+
+ That said, it is highly recommended to use cumulative livepatches
+ because they help keeping the consistency of all changes. In this case,
+ functions might be patched two times only during the transition period.
+
+
+5.3. Replacing
+--------------
+
+All enabled patches might get replaced by a cumulative patch that
+has the .replace flag set.
+
+Once the new patch is enabled and the 'transition' finishes then
+all the functions (struct klp_func) associated with the replaced
+patches are removed from the corresponding struct klp_ops. Also
+the ftrace handler is unregistered and the struct klp_ops is
+freed when the related function is not modified by the new patch
+and func_stack list becomes empty.
+
+See Documentation/livepatch/cumulative-patches.rst for more details.
+
+
+5.4. Disabling
+--------------
+
+Enabled patches might get disabled by writing '0' to
+/sys/kernel/livepatch/<name>/enabled.
+
+First, livepatch enters into a transition state where tasks are converging
+to the unpatched state. The system starts using either the code from
+the previously enabled patch or even the original one. This stage is
+indicated by a value of '1' in /sys/kernel/livepatch/<name>/transition.
+For more information about this process, see the "Consistency model"
+section.
+
+Second, once all tasks have been unpatched, the 'transition' value changes
+to '0'. All the functions (struct klp_func) associated with the to-be-disabled
+patch are removed from the corresponding struct klp_ops. The ftrace handler
+is unregistered and the struct klp_ops is freed when the func_stack list
+becomes empty.
+
+Third, the sysfs interface is destroyed.
+
+
+5.5. Removing
+-------------
+
+Module removal is only safe when there are no users of functions provided
+by the module. This is the reason why the force feature permanently
+disables the removal. Only when the system is successfully transitioned
+to a new patch state (patched/unpatched) without being forced it is
+guaranteed that no task sleeps or runs in the old code.
+
+
+6. Sysfs
+========
+
+Information about the registered patches can be found under
+/sys/kernel/livepatch. The patches could be enabled and disabled
+by writing there.
+
+/sys/kernel/livepatch/<patch>/force attributes allow administrator to affect a
+patching operation.
+
+See Documentation/ABI/testing/sysfs-kernel-livepatch for more details.
+
+
+7. Limitations
+==============
+
+The current Livepatch implementation has several limitations:
+
+ - Only functions that can be traced could be patched.
+
+ Livepatch is based on the dynamic ftrace. In particular, functions
+ implementing ftrace or the livepatch ftrace handler could not be
+ patched. Otherwise, the code would end up in an infinite loop. A
+ potential mistake is prevented by marking the problematic functions
+ by "notrace".
+
+
+
+ - Livepatch works reliably only when the dynamic ftrace is located at
+ the very beginning of the function.
+
+ The function need to be redirected before the stack or the function
+ parameters are modified in any way. For example, livepatch requires
+ using -fentry gcc compiler option on x86_64.
+
+ One exception is the PPC port. It uses relative addressing and TOC.
+ Each function has to handle TOC and save LR before it could call
+ the ftrace handler. This operation has to be reverted on return.
+ Fortunately, the generic ftrace code has the same problem and all
+ this is handled on the ftrace level.
+
+
+ - Kretprobes using the ftrace framework conflict with the patched
+ functions.
+
+ Both kretprobes and livepatches use a ftrace handler that modifies
+ the return address. The first user wins. Either the probe or the patch
+ is rejected when the handler is already in use by the other.
+
+
+ - Kprobes in the original function are ignored when the code is
+ redirected to the new implementation.
+
+ There is a work in progress to add warnings about this situation.