1 files changed, 0 insertions, 88 deletions
diff --git a/Documentation/i2c/i2c-protocol b/Documentation/i2c/i2c-protocol
deleted file mode 100644
index ff6d6cee6c7e..000000000000
--- a/Documentation/i2c/i2c-protocol
+++ /dev/null
@@ -1,88 +0,0 @@
-This document describes the i2c protocol. Or will, when it is finished :-)
-
-Key to symbols
-==============
-
-S     (1 bit) : Start bit
-P     (1 bit) : Stop bit
-Rd/Wr (1 bit) : Read/Write bit. Rd equals 1, Wr equals 0.
-A, NA (1 bit) : Accept and reverse accept bit.
-Addr  (7 bits): I2C 7 bit address. Note that this can be expanded as usual to
-                get a 10 bit I2C address.
-Comm  (8 bits): Command byte, a data byte which often selects a register on
-                the device.
-Data  (8 bits): A plain data byte. Sometimes, I write DataLow, DataHigh
-                for 16 bit data.
-Count (8 bits): A data byte containing the length of a block operation.
-
-[..]: Data sent by I2C device, as opposed to data sent by the host adapter.
-
-
-Simple send transaction
-======================
-
-This corresponds to i2c_master_send.
-
-  S Addr Wr [A] Data [A] Data [A] ... [A] Data [A] P
-
-
-Simple receive transaction
-===========================
-
-This corresponds to i2c_master_recv
-
-  S Addr Rd [A] [Data] A [Data] A ... A [Data] NA P
-
-
-Combined transactions
-====================
-
-This corresponds to i2c_transfer
-
-They are just like the above transactions, but instead of a stop bit P
-a start bit S is sent and the transaction continues. An example of
-a byte read, followed by a byte write:
-
-  S Addr Rd [A] [Data] NA S Addr Wr [A] Data [A] P
-
-
-Modified transactions
-=====================
-
-The following modifications to the I2C protocol can also be generated by
-setting these flags for i2c messages. With the exception of I2C_M_NOSTART, they
-are usually only needed to work around device issues:
-
-I2C_M_IGNORE_NAK:
-    Normally message is interrupted immediately if there is [NA] from the
-    client. Setting this flag treats any [NA] as [A], and all of
-    message is sent.
-    These messages may still fail to SCL lo->hi timeout.
-
-I2C_M_NO_RD_ACK:
-    In a read message, master A/NA bit is skipped.
-
-I2C_M_NOSTART:
-    In a combined transaction, no 'S Addr Wr/Rd [A]' is generated at some
-    point. For example, setting I2C_M_NOSTART on the second partial message
-    generates something like:
-      S Addr Rd [A] [Data] NA Data [A] P
-    If you set the I2C_M_NOSTART variable for the first partial message,
-    we do not generate Addr, but we do generate the startbit S. This will
-    probably confuse all other clients on your bus, so don't try this.
-
-    This is often used to gather transmits from multiple data buffers in
-    system memory into something that appears as a single transfer to the
-    I2C device but may also be used between direction changes by some
-    rare devices.
-
-I2C_M_REV_DIR_ADDR:
-    This toggles the Rd/Wr flag. That is, if you want to do a write, but
-    need to emit an Rd instead of a Wr, or vice versa, you set this
-    flag. For example:
-      S Addr Rd [A] Data [A] Data [A] ... [A] Data [A] P
-
-I2C_M_STOP:
-    Force a stop condition (P) after the message. Some I2C related protocols
-    like SCCB require that. Normally, you really don't want to get interrupted
-    between the messages of one transfer.