diff options
Diffstat (limited to 'Documentation/i2c/busses/scx200_acb')
| -rw-r--r-- | Documentation/i2c/busses/scx200_acb | 32 |
1 files changed, 0 insertions, 32 deletions
diff --git a/Documentation/i2c/busses/scx200_acb b/Documentation/i2c/busses/scx200_acb deleted file mode 100644 index ce83c871fe95..000000000000 --- a/Documentation/i2c/busses/scx200_acb +++ /dev/null @@ -1,32 +0,0 @@ -Kernel driver scx200_acb - -Author: Christer Weinigel <wingel@nano-system.com> - -The driver supersedes the older, never merged driver named i2c-nscacb. - -Module Parameters ------------------ - -* base: up to 4 ints - Base addresses for the ACCESS.bus controllers on SCx200 and SC1100 devices - - By default the driver uses two base addresses 0x820 and 0x840. - If you want only one base address, specify the second as 0 so as to - override this default. - -Description ------------ - -Enable the use of the ACCESS.bus controller on the Geode SCx200 and -SC1100 processors and the CS5535 and CS5536 Geode companion devices. - -Device-specific notes ---------------------- - -The SC1100 WRAP boards are known to use base addresses 0x810 and 0x820. -If the scx200_acb driver is built into the kernel, add the following -parameter to your boot command line: - scx200_acb.base=0x810,0x820 -If the scx200_acb driver is built as a module, add the following line to -a configuration file in /etc/modprobe.d/ instead: - options scx200_acb base=0x810,0x820 |