aboutsummaryrefslogtreecommitdiff
path: root/Documentation/filesystems/vfs.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/filesystems/vfs.rst')
-rw-r--r--Documentation/filesystems/vfs.rst1428
1 files changed, 1428 insertions, 0 deletions
diff --git a/Documentation/filesystems/vfs.rst b/Documentation/filesystems/vfs.rst
new file mode 100644
index 000000000000..0f85ab21c2ca
--- /dev/null
+++ b/Documentation/filesystems/vfs.rst
@@ -0,0 +1,1428 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+Overview of the Linux Virtual File System
+=========================================
+
+Original author: Richard Gooch <rgooch@atnf.csiro.au>
+
+- Copyright (C) 1999 Richard Gooch
+- Copyright (C) 2005 Pekka Enberg
+
+
+Introduction
+============
+
+The Virtual File System (also known as the Virtual Filesystem Switch) is
+the software layer in the kernel that provides the filesystem interface
+to userspace programs. It also provides an abstraction within the
+kernel which allows different filesystem implementations to coexist.
+
+VFS system calls open(2), stat(2), read(2), write(2), chmod(2) and so on
+are called from a process context. Filesystem locking is described in
+the document Documentation/filesystems/Locking.
+
+
+Directory Entry Cache (dcache)
+------------------------------
+
+The VFS implements the open(2), stat(2), chmod(2), and similar system
+calls. The pathname argument that is passed to them is used by the VFS
+to search through the directory entry cache (also known as the dentry
+cache or dcache). This provides a very fast look-up mechanism to
+translate a pathname (filename) into a specific dentry. Dentries live
+in RAM and are never saved to disc: they exist only for performance.
+
+The dentry cache is meant to be a view into your entire filespace. As
+most computers cannot fit all dentries in the RAM at the same time, some
+bits of the cache are missing. In order to resolve your pathname into a
+dentry, the VFS may have to resort to creating dentries along the way,
+and then loading the inode. This is done by looking up the inode.
+
+
+The Inode Object
+----------------
+
+An individual dentry usually has a pointer to an inode. Inodes are
+filesystem objects such as regular files, directories, FIFOs and other
+beasts. They live either on the disc (for block device filesystems) or
+in the memory (for pseudo filesystems). Inodes that live on the disc
+are copied into the memory when required and changes to the inode are
+written back to disc. A single inode can be pointed to by multiple
+dentries (hard links, for example, do this).
+
+To look up an inode requires that the VFS calls the lookup() method of
+the parent directory inode. This method is installed by the specific
+filesystem implementation that the inode lives in. Once the VFS has the
+required dentry (and hence the inode), we can do all those boring things
+like open(2) the file, or stat(2) it to peek at the inode data. The
+stat(2) operation is fairly simple: once the VFS has the dentry, it
+peeks at the inode data and passes some of it back to userspace.
+
+
+The File Object
+---------------
+
+Opening a file requires another operation: allocation of a file
+structure (this is the kernel-side implementation of file descriptors).
+The freshly allocated file structure is initialized with a pointer to
+the dentry and a set of file operation member functions. These are
+taken from the inode data. The open() file method is then called so the
+specific filesystem implementation can do its work. You can see that
+this is another switch performed by the VFS. The file structure is
+placed into the file descriptor table for the process.
+
+Reading, writing and closing files (and other assorted VFS operations)
+is done by using the userspace file descriptor to grab the appropriate
+file structure, and then calling the required file structure method to
+do whatever is required. For as long as the file is open, it keeps the
+dentry in use, which in turn means that the VFS inode is still in use.
+
+
+Registering and Mounting a Filesystem
+=====================================
+
+To register and unregister a filesystem, use the following API
+functions:
+
+.. code-block:: c
+
+ #include <linux/fs.h>
+
+ extern int register_filesystem(struct file_system_type *);
+ extern int unregister_filesystem(struct file_system_type *);
+
+The passed struct file_system_type describes your filesystem. When a
+request is made to mount a filesystem onto a directory in your
+namespace, the VFS will call the appropriate mount() method for the
+specific filesystem. New vfsmount referring to the tree returned by
+->mount() will be attached to the mountpoint, so that when pathname
+resolution reaches the mountpoint it will jump into the root of that
+vfsmount.
+
+You can see all filesystems that are registered to the kernel in the
+file /proc/filesystems.
+
+
+struct file_system_type
+-----------------------
+
+This describes the filesystem. As of kernel 2.6.39, the following
+members are defined:
+
+.. code-block:: c
+
+ struct file_system_operations {
+ const char *name;
+ int fs_flags;
+ struct dentry *(*mount) (struct file_system_type *, int,
+ const char *, void *);
+ void (*kill_sb) (struct super_block *);
+ struct module *owner;
+ struct file_system_type * next;
+ struct list_head fs_supers;
+ struct lock_class_key s_lock_key;
+ struct lock_class_key s_umount_key;
+ };
+
+``name``
+ the name of the filesystem type, such as "ext2", "iso9660",
+ "msdos" and so on
+
+``fs_flags``
+ various flags (i.e. FS_REQUIRES_DEV, FS_NO_DCACHE, etc.)
+
+``mount``
+ the method to call when a new instance of this filesystem should
+ be mounted
+
+``kill_sb``
+ the method to call when an instance of this filesystem should be
+ shut down
+
+
+``owner``
+ for internal VFS use: you should initialize this to THIS_MODULE
+ in most cases.
+
+``next``
+ for internal VFS use: you should initialize this to NULL
+
+ s_lock_key, s_umount_key: lockdep-specific
+
+The mount() method has the following arguments:
+
+``struct file_system_type *fs_type``
+ describes the filesystem, partly initialized by the specific
+ filesystem code
+
+``int flags``
+ mount flags
+
+``const char *dev_name``
+ the device name we are mounting.
+
+``void *data``
+ arbitrary mount options, usually comes as an ASCII string (see
+ "Mount Options" section)
+
+The mount() method must return the root dentry of the tree requested by
+caller. An active reference to its superblock must be grabbed and the
+superblock must be locked. On failure it should return ERR_PTR(error).
+
+The arguments match those of mount(2) and their interpretation depends
+on filesystem type. E.g. for block filesystems, dev_name is interpreted
+as block device name, that device is opened and if it contains a
+suitable filesystem image the method creates and initializes struct
+super_block accordingly, returning its root dentry to caller.
+
+->mount() may choose to return a subtree of existing filesystem - it
+doesn't have to create a new one. The main result from the caller's
+point of view is a reference to dentry at the root of (sub)tree to be
+attached; creation of new superblock is a common side effect.
+
+The most interesting member of the superblock structure that the mount()
+method fills in is the "s_op" field. This is a pointer to a "struct
+super_operations" which describes the next level of the filesystem
+implementation.
+
+Usually, a filesystem uses one of the generic mount() implementations
+and provides a fill_super() callback instead. The generic variants are:
+
+``mount_bdev``
+ mount a filesystem residing on a block device
+
+``mount_nodev``
+ mount a filesystem that is not backed by a device
+
+``mount_single``
+ mount a filesystem which shares the instance between all mounts
+
+A fill_super() callback implementation has the following arguments:
+
+``struct super_block *sb``
+ the superblock structure. The callback must initialize this
+ properly.
+
+``void *data``
+ arbitrary mount options, usually comes as an ASCII string (see
+ "Mount Options" section)
+
+``int silent``
+ whether or not to be silent on error
+
+
+The Superblock Object
+=====================
+
+A superblock object represents a mounted filesystem.
+
+
+struct super_operations
+-----------------------
+
+This describes how the VFS can manipulate the superblock of your
+filesystem. As of kernel 2.6.22, the following members are defined:
+
+.. code-block:: c
+
+ struct super_operations {
+ struct inode *(*alloc_inode)(struct super_block *sb);
+ void (*destroy_inode)(struct inode *);
+
+ void (*dirty_inode) (struct inode *, int flags);
+ int (*write_inode) (struct inode *, int);
+ void (*drop_inode) (struct inode *);
+ void (*delete_inode) (struct inode *);
+ void (*put_super) (struct super_block *);
+ int (*sync_fs)(struct super_block *sb, int wait);
+ int (*freeze_fs) (struct super_block *);
+ int (*unfreeze_fs) (struct super_block *);
+ int (*statfs) (struct dentry *, struct kstatfs *);
+ int (*remount_fs) (struct super_block *, int *, char *);
+ void (*clear_inode) (struct inode *);
+ void (*umount_begin) (struct super_block *);
+
+ int (*show_options)(struct seq_file *, struct dentry *);
+
+ ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
+ ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
+ int (*nr_cached_objects)(struct super_block *);
+ void (*free_cached_objects)(struct super_block *, int);
+ };
+
+All methods are called without any locks being held, unless otherwise
+noted. This means that most methods can block safely. All methods are
+only called from a process context (i.e. not from an interrupt handler
+or bottom half).
+
+``alloc_inode``
+ this method is called by alloc_inode() to allocate memory for
+ struct inode and initialize it. If this function is not
+ defined, a simple 'struct inode' is allocated. Normally
+ alloc_inode will be used to allocate a larger structure which
+ contains a 'struct inode' embedded within it.
+
+``destroy_inode``
+ this method is called by destroy_inode() to release resources
+ allocated for struct inode. It is only required if
+ ->alloc_inode was defined and simply undoes anything done by
+ ->alloc_inode.
+
+``dirty_inode``
+ this method is called by the VFS to mark an inode dirty.
+
+``write_inode``
+ this method is called when the VFS needs to write an inode to
+ disc. The second parameter indicates whether the write should
+ be synchronous or not, not all filesystems check this flag.
+
+``drop_inode``
+ called when the last access to the inode is dropped, with the
+ inode->i_lock spinlock held.
+
+ This method should be either NULL (normal UNIX filesystem
+ semantics) or "generic_delete_inode" (for filesystems that do
+ not want to cache inodes - causing "delete_inode" to always be
+ called regardless of the value of i_nlink)
+
+ The "generic_delete_inode()" behavior is equivalent to the old
+ practice of using "force_delete" in the put_inode() case, but
+ does not have the races that the "force_delete()" approach had.
+
+``delete_inode``
+ called when the VFS wants to delete an inode
+
+``put_super``
+ called when the VFS wishes to free the superblock
+ (i.e. unmount). This is called with the superblock lock held
+
+``sync_fs``
+ called when VFS is writing out all dirty data associated with a
+ superblock. The second parameter indicates whether the method
+ should wait until the write out has been completed. Optional.
+
+``freeze_fs``
+ called when VFS is locking a filesystem and forcing it into a
+ consistent state. This method is currently used by the Logical
+ Volume Manager (LVM).
+
+``unfreeze_fs``
+ called when VFS is unlocking a filesystem and making it writable
+ again.
+
+``statfs``
+ called when the VFS needs to get filesystem statistics.
+
+``remount_fs``
+ called when the filesystem is remounted. This is called with
+ the kernel lock held
+
+``clear_inode``
+ called then the VFS clears the inode. Optional
+
+``umount_begin``
+ called when the VFS is unmounting a filesystem.
+
+``show_options``
+ called by the VFS to show mount options for /proc/<pid>/mounts.
+ (see "Mount Options" section)
+
+``quota_read``
+ called by the VFS to read from filesystem quota file.
+
+``quota_write``
+ called by the VFS to write to filesystem quota file.
+
+``nr_cached_objects``
+ called by the sb cache shrinking function for the filesystem to
+ return the number of freeable cached objects it contains.
+ Optional.
+
+``free_cache_objects``
+ called by the sb cache shrinking function for the filesystem to
+ scan the number of objects indicated to try to free them.
+ Optional, but any filesystem implementing this method needs to
+ also implement ->nr_cached_objects for it to be called
+ correctly.
+
+ We can't do anything with any errors that the filesystem might
+ encountered, hence the void return type. This will never be
+ called if the VM is trying to reclaim under GFP_NOFS conditions,
+ hence this method does not need to handle that situation itself.
+
+ Implementations must include conditional reschedule calls inside
+ any scanning loop that is done. This allows the VFS to
+ determine appropriate scan batch sizes without having to worry
+ about whether implementations will cause holdoff problems due to
+ large scan batch sizes.
+
+Whoever sets up the inode is responsible for filling in the "i_op"
+field. This is a pointer to a "struct inode_operations" which describes
+the methods that can be performed on individual inodes.
+
+
+struct xattr_handlers
+---------------------
+
+On filesystems that support extended attributes (xattrs), the s_xattr
+superblock field points to a NULL-terminated array of xattr handlers.
+Extended attributes are name:value pairs.
+
+``name``
+ Indicates that the handler matches attributes with the specified
+ name (such as "system.posix_acl_access"); the prefix field must
+ be NULL.
+
+``prefix``
+ Indicates that the handler matches all attributes with the
+ specified name prefix (such as "user."); the name field must be
+ NULL.
+
+``list``
+ Determine if attributes matching this xattr handler should be
+ listed for a particular dentry. Used by some listxattr
+ implementations like generic_listxattr.
+
+``get``
+ Called by the VFS to get the value of a particular extended
+ attribute. This method is called by the getxattr(2) system
+ call.
+
+``set``
+ Called by the VFS to set the value of a particular extended
+ attribute. When the new value is NULL, called to remove a
+ particular extended attribute. This method is called by the the
+ setxattr(2) and removexattr(2) system calls.
+
+When none of the xattr handlers of a filesystem match the specified
+attribute name or when a filesystem doesn't support extended attributes,
+the various ``*xattr(2)`` system calls return -EOPNOTSUPP.
+
+
+The Inode Object
+================
+
+An inode object represents an object within the filesystem.
+
+
+struct inode_operations
+-----------------------
+
+This describes how the VFS can manipulate an inode in your filesystem.
+As of kernel 2.6.22, the following members are defined:
+
+.. code-block:: c
+
+ struct inode_operations {
+ int (*create) (struct inode *,struct dentry *, umode_t, bool);
+ struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int);
+ int (*link) (struct dentry *,struct inode *,struct dentry *);
+ int (*unlink) (struct inode *,struct dentry *);
+ int (*symlink) (struct inode *,struct dentry *,const char *);
+ int (*mkdir) (struct inode *,struct dentry *,umode_t);
+ int (*rmdir) (struct inode *,struct dentry *);
+ int (*mknod) (struct inode *,struct dentry *,umode_t,dev_t);
+ int (*rename) (struct inode *, struct dentry *,
+ struct inode *, struct dentry *, unsigned int);
+ int (*readlink) (struct dentry *, char __user *,int);
+ const char *(*get_link) (struct dentry *, struct inode *,
+ struct delayed_call *);
+ int (*permission) (struct inode *, int);
+ int (*get_acl)(struct inode *, int);
+ int (*setattr) (struct dentry *, struct iattr *);
+ int (*getattr) (const struct path *, struct kstat *, u32, unsigned int);
+ ssize_t (*listxattr) (struct dentry *, char *, size_t);
+ void (*update_time)(struct inode *, struct timespec *, int);
+ int (*atomic_open)(struct inode *, struct dentry *, struct file *,
+ unsigned open_flag, umode_t create_mode);
+ int (*tmpfile) (struct inode *, struct dentry *, umode_t);
+ };
+
+Again, all methods are called without any locks being held, unless
+otherwise noted.
+
+``create``
+ called by the open(2) and creat(2) system calls. Only required
+ if you want to support regular files. The dentry you get should
+ not have an inode (i.e. it should be a negative dentry). Here
+ you will probably call d_instantiate() with the dentry and the
+ newly created inode
+
+``lookup``
+ called when the VFS needs to look up an inode in a parent
+ directory. The name to look for is found in the dentry. This
+ method must call d_add() to insert the found inode into the
+ dentry. The "i_count" field in the inode structure should be
+ incremented. If the named inode does not exist a NULL inode
+ should be inserted into the dentry (this is called a negative
+ dentry). Returning an error code from this routine must only be
+ done on a real error, otherwise creating inodes with system
+ calls like create(2), mknod(2), mkdir(2) and so on will fail.
+ If you wish to overload the dentry methods then you should
+ initialise the "d_dop" field in the dentry; this is a pointer to
+ a struct "dentry_operations". This method is called with the
+ directory inode semaphore held
+
+``link``
+ called by the link(2) system call. Only required if you want to
+ support hard links. You will probably need to call
+ d_instantiate() just as you would in the create() method
+
+``unlink``
+ called by the unlink(2) system call. Only required if you want
+ to support deleting inodes
+
+``symlink``
+ called by the symlink(2) system call. Only required if you want
+ to support symlinks. You will probably need to call
+ d_instantiate() just as you would in the create() method
+
+``mkdir``
+ called by the mkdir(2) system call. Only required if you want
+ to support creating subdirectories. You will probably need to
+ call d_instantiate() just as you would in the create() method
+
+``rmdir``
+ called by the rmdir(2) system call. Only required if you want
+ to support deleting subdirectories
+
+``mknod``
+ called by the mknod(2) system call to create a device (char,
+ block) inode or a named pipe (FIFO) or socket. Only required if
+ you want to support creating these types of inodes. You will
+ probably need to call d_instantiate() just as you would in the
+ create() method
+
+``rename``
+ called by the rename(2) system call to rename the object to have
+ the parent and name given by the second inode and dentry.
+
+ The filesystem must return -EINVAL for any unsupported or
+ unknown flags. Currently the following flags are implemented:
+ (1) RENAME_NOREPLACE: this flag indicates that if the target of
+ the rename exists the rename should fail with -EEXIST instead of
+ replacing the target. The VFS already checks for existence, so
+ for local filesystems the RENAME_NOREPLACE implementation is
+ equivalent to plain rename.
+ (2) RENAME_EXCHANGE: exchange source and target. Both must
+ exist; this is checked by the VFS. Unlike plain rename, source
+ and target may be of different type.
+
+``get_link``
+ called by the VFS to follow a symbolic link to the inode it
+ points to. Only required if you want to support symbolic links.
+ This method returns the symlink body to traverse (and possibly
+ resets the current position with nd_jump_link()). If the body
+ won't go away until the inode is gone, nothing else is needed;
+ if it needs to be otherwise pinned, arrange for its release by
+ having get_link(..., ..., done) do set_delayed_call(done,
+ destructor, argument). In that case destructor(argument) will
+ be called once VFS is done with the body you've returned. May
+ be called in RCU mode; that is indicated by NULL dentry
+ argument. If request can't be handled without leaving RCU mode,
+ have it return ERR_PTR(-ECHILD).
+
+ If the filesystem stores the symlink target in ->i_link, the
+ VFS may use it directly without calling ->get_link(); however,
+ ->get_link() must still be provided. ->i_link must not be
+ freed until after an RCU grace period. Writing to ->i_link
+ post-iget() time requires a 'release' memory barrier.
+
+``readlink``
+ this is now just an override for use by readlink(2) for the
+ cases when ->get_link uses nd_jump_link() or object is not in
+ fact a symlink. Normally filesystems should only implement
+ ->get_link for symlinks and readlink(2) will automatically use
+ that.
+
+``permission``
+ called by the VFS to check for access rights on a POSIX-like
+ filesystem.
+
+ May be called in rcu-walk mode (mask & MAY_NOT_BLOCK). If in
+ rcu-walk mode, the filesystem must check the permission without
+ blocking or storing to the inode.
+
+ If a situation is encountered that rcu-walk cannot handle,
+ return
+ -ECHILD and it will be called again in ref-walk mode.
+
+``setattr``
+ called by the VFS to set attributes for a file. This method is
+ called by chmod(2) and related system calls.
+
+``getattr``
+ called by the VFS to get attributes of a file. This method is
+ called by stat(2) and related system calls.
+
+``listxattr``
+ called by the VFS to list all extended attributes for a given
+ file. This method is called by the listxattr(2) system call.
+
+``update_time``
+ called by the VFS to update a specific time or the i_version of
+ an inode. If this is not defined the VFS will update the inode
+ itself and call mark_inode_dirty_sync.
+
+``atomic_open``
+ called on the last component of an open. Using this optional
+ method the filesystem can look up, possibly create and open the
+ file in one atomic operation. If it wants to leave actual
+ opening to the caller (e.g. if the file turned out to be a
+ symlink, device, or just something filesystem won't do atomic
+ open for), it may signal this by returning finish_no_open(file,
+ dentry). This method is only called if the last component is
+ negative or needs lookup. Cached positive dentries are still
+ handled by f_op->open(). If the file was created, FMODE_CREATED
+ flag should be set in file->f_mode. In case of O_EXCL the
+ method must only succeed if the file didn't exist and hence
+ FMODE_CREATED shall always be set on success.
+
+``tmpfile``
+ called in the end of O_TMPFILE open(). Optional, equivalent to
+ atomically creating, opening and unlinking a file in given
+ directory.
+
+
+The Address Space Object
+========================
+
+The address space object is used to group and manage pages in the page
+cache. It can be used to keep track of the pages in a file (or anything
+else) and also track the mapping of sections of the file into process
+address spaces.
+
+There are a number of distinct yet related services that an
+address-space can provide. These include communicating memory pressure,
+page lookup by address, and keeping track of pages tagged as Dirty or
+Writeback.
+
+The first can be used independently to the others. The VM can try to
+either write dirty pages in order to clean them, or release clean pages
+in order to reuse them. To do this it can call the ->writepage method
+on dirty pages, and ->releasepage on clean pages with PagePrivate set.
+Clean pages without PagePrivate and with no external references will be
+released without notice being given to the address_space.
+
+To achieve this functionality, pages need to be placed on an LRU with
+lru_cache_add and mark_page_active needs to be called whenever the page
+is used.
+
+Pages are normally kept in a radix tree index by ->index. This tree
+maintains information about the PG_Dirty and PG_Writeback status of each
+page, so that pages with either of these flags can be found quickly.
+
+The Dirty tag is primarily used by mpage_writepages - the default
+->writepages method. It uses the tag to find dirty pages to call
+->writepage on. If mpage_writepages is not used (i.e. the address
+provides its own ->writepages) , the PAGECACHE_TAG_DIRTY tag is almost
+unused. write_inode_now and sync_inode do use it (through
+__sync_single_inode) to check if ->writepages has been successful in
+writing out the whole address_space.
+
+The Writeback tag is used by filemap*wait* and sync_page* functions, via
+filemap_fdatawait_range, to wait for all writeback to complete.
+
+An address_space handler may attach extra information to a page,
+typically using the 'private' field in the 'struct page'. If such
+information is attached, the PG_Private flag should be set. This will
+cause various VM routines to make extra calls into the address_space
+handler to deal with that data.
+
+An address space acts as an intermediate between storage and
+application. Data is read into the address space a whole page at a
+time, and provided to the application either by copying of the page, or
+by memory-mapping the page. Data is written into the address space by
+the application, and then written-back to storage typically in whole
+pages, however the address_space has finer control of write sizes.
+
+The read process essentially only requires 'readpage'. The write
+process is more complicated and uses write_begin/write_end or
+set_page_dirty to write data into the address_space, and writepage and
+writepages to writeback data to storage.
+
+Adding and removing pages to/from an address_space is protected by the
+inode's i_mutex.
+
+When data is written to a page, the PG_Dirty flag should be set. It
+typically remains set until writepage asks for it to be written. This
+should clear PG_Dirty and set PG_Writeback. It can be actually written
+at any point after PG_Dirty is clear. Once it is known to be safe,
+PG_Writeback is cleared.
+
+Writeback makes use of a writeback_control structure to direct the
+operations. This gives the the writepage and writepages operations some
+information about the nature of and reason for the writeback request,
+and the constraints under which it is being done. It is also used to
+return information back to the caller about the result of a writepage or
+writepages request.
+
+
+Handling errors during writeback
+--------------------------------
+
+Most applications that do buffered I/O will periodically call a file
+synchronization call (fsync, fdatasync, msync or sync_file_range) to
+ensure that data written has made it to the backing store. When there
+is an error during writeback, they expect that error to be reported when
+a file sync request is made. After an error has been reported on one
+request, subsequent requests on the same file descriptor should return
+0, unless further writeback errors have occurred since the previous file
+syncronization.
+
+Ideally, the kernel would report errors only on file descriptions on
+which writes were done that subsequently failed to be written back. The
+generic pagecache infrastructure does not track the file descriptions
+that have dirtied each individual page however, so determining which
+file descriptors should get back an error is not possible.
+
+Instead, the generic writeback error tracking infrastructure in the
+kernel settles for reporting errors to fsync on all file descriptions
+that were open at the time that the error occurred. In a situation with
+multiple writers, all of them will get back an error on a subsequent
+fsync, even if all of the writes done through that particular file
+descriptor succeeded (or even if there were no writes on that file
+descriptor at all).
+
+Filesystems that wish to use this infrastructure should call
+mapping_set_error to record the error in the address_space when it
+occurs. Then, after writing back data from the pagecache in their
+file->fsync operation, they should call file_check_and_advance_wb_err to
+ensure that the struct file's error cursor has advanced to the correct
+point in the stream of errors emitted by the backing device(s).
+
+
+struct address_space_operations
+-------------------------------
+
+This describes how the VFS can manipulate mapping of a file to page
+cache in your filesystem. The following members are defined:
+
+.. code-block:: c
+
+ struct address_space_operations {
+ int (*writepage)(struct page *page, struct writeback_control *wbc);
+ int (*readpage)(struct file *, struct page *);
+ int (*writepages)(struct address_space *, struct writeback_control *);
+ int (*set_page_dirty)(struct page *page);
+ int (*readpages)(struct file *filp, struct address_space *mapping,
+ struct list_head *pages, unsigned nr_pages);
+ int (*write_begin)(struct file *, struct address_space *mapping,
+ loff_t pos, unsigned len, unsigned flags,
+ struct page **pagep, void **fsdata);
+ int (*write_end)(struct file *, struct address_space *mapping,
+ loff_t pos, unsigned len, unsigned copied,
+ struct page *page, void *fsdata);
+ sector_t (*bmap)(struct address_space *, sector_t);
+ void (*invalidatepage) (struct page *, unsigned int, unsigned int);
+ int (*releasepage) (struct page *, int);
+ void (*freepage)(struct page *);
+ ssize_t (*direct_IO)(struct kiocb *, struct iov_iter *iter);
+ /* isolate a page for migration */
+ bool (*isolate_page) (struct page *, isolate_mode_t);
+ /* migrate the contents of a page to the specified target */
+ int (*migratepage) (struct page *, struct page *);
+ /* put migration-failed page back to right list */
+ void (*putback_page) (struct page *);
+ int (*launder_page) (struct page *);
+
+ int (*is_partially_uptodate) (struct page *, unsigned long,
+ unsigned long);
+ void (*is_dirty_writeback) (struct page *, bool *, bool *);
+ int (*error_remove_page) (struct mapping *mapping, struct page *page);
+ int (*swap_activate)(struct file *);
+ int (*swap_deactivate)(struct file *);
+ };
+
+``writepage``
+ called by the VM to write a dirty page to backing store. This
+ may happen for data integrity reasons (i.e. 'sync'), or to free
+ up memory (flush). The difference can be seen in
+ wbc->sync_mode. The PG_Dirty flag has been cleared and
+ PageLocked is true. writepage should start writeout, should set
+ PG_Writeback, and should make sure the page is unlocked, either
+ synchronously or asynchronously when the write operation
+ completes.
+
+ If wbc->sync_mode is WB_SYNC_NONE, ->writepage doesn't have to
+ try too hard if there are problems, and may choose to write out
+ other pages from the mapping if that is easier (e.g. due to
+ internal dependencies). If it chooses not to start writeout, it
+ should return AOP_WRITEPAGE_ACTIVATE so that the VM will not
+ keep calling ->writepage on that page.
+
+ See the file "Locking" for more details.
+
+``readpage``
+ called by the VM to read a page from backing store. The page
+ will be Locked when readpage is called, and should be unlocked
+ and marked uptodate once the read completes. If ->readpage
+ discovers that it needs to unlock the page for some reason, it
+ can do so, and then return AOP_TRUNCATED_PAGE. In this case,
+ the page will be relocated, relocked and if that all succeeds,
+ ->readpage will be called again.
+
+``writepages``
+ called by the VM to write out pages associated with the
+ address_space object. If wbc->sync_mode is WBC_SYNC_ALL, then
+ the writeback_control will specify a range of pages that must be
+ written out. If it is WBC_SYNC_NONE, then a nr_to_write is
+ given and that many pages should be written if possible. If no
+ ->writepages is given, then mpage_writepages is used instead.
+ This will choose pages from the address space that are tagged as
+ DIRTY and will pass them to ->writepage.
+
+``set_page_dirty``
+ called by the VM to set a page dirty. This is particularly
+ needed if an address space attaches private data to a page, and
+ that data needs to be updated when a page is dirtied. This is
+ called, for example, when a memory mapped page gets modified.
+ If defined, it should set the PageDirty flag, and the
+ PAGECACHE_TAG_DIRTY tag in the radix tree.
+
+``readpages``
+ called by the VM to read pages associated with the address_space
+ object. This is essentially just a vector version of readpage.
+ Instead of just one page, several pages are requested.
+ readpages is only used for read-ahead, so read errors are
+ ignored. If anything goes wrong, feel free to give up.
+
+``write_begin``
+ Called by the generic buffered write code to ask the filesystem
+ to prepare to write len bytes at the given offset in the file.
+ The address_space should check that the write will be able to
+ complete, by allocating space if necessary and doing any other
+ internal housekeeping. If the write will update parts of any
+ basic-blocks on storage, then those blocks should be pre-read
+ (if they haven't been read already) so that the updated blocks
+ can be written out properly.
+
+ The filesystem must return the locked pagecache page for the
+ specified offset, in ``*pagep``, for the caller to write into.
+
+ It must be able to cope with short writes (where the length
+ passed to write_begin is greater than the number of bytes copied
+ into the page).
+
+ flags is a field for AOP_FLAG_xxx flags, described in
+ include/linux/fs.h.
+
+ A void * may be returned in fsdata, which then gets passed into
+ write_end.
+
+ Returns 0 on success; < 0 on failure (which is the error code),
+ in which case write_end is not called.
+
+``write_end``
+ After a successful write_begin, and data copy, write_end must be
+ called. len is the original len passed to write_begin, and
+ copied is the amount that was able to be copied.
+
+ The filesystem must take care of unlocking the page and
+ releasing it refcount, and updating i_size.
+
+ Returns < 0 on failure, otherwise the number of bytes (<=
+ 'copied') that were able to be copied into pagecache.
+
+``bmap``
+ called by the VFS to map a logical block offset within object to
+ physical block number. This method is used by the FIBMAP ioctl
+ and for working with swap-files. To be able to swap to a file,
+ the file must have a stable mapping to a block device. The swap
+ system does not go through the filesystem but instead uses bmap
+ to find out where the blocks in the file are and uses those
+ addresses directly.
+
+``invalidatepage``
+ If a page has PagePrivate set, then invalidatepage will be
+ called when part or all of the page is to be removed from the
+ address space. This generally corresponds to either a
+ truncation, punch hole or a complete invalidation of the address
+ space (in the latter case 'offset' will always be 0 and 'length'
+ will be PAGE_SIZE). Any private data associated with the page
+ should be updated to reflect this truncation. If offset is 0
+ and length is PAGE_SIZE, then the private data should be
+ released, because the page must be able to be completely
+ discarded. This may be done by calling the ->releasepage
+ function, but in this case the release MUST succeed.
+
+``releasepage``
+ releasepage is called on PagePrivate pages to indicate that the
+ page should be freed if possible. ->releasepage should remove
+ any private data from the page and clear the PagePrivate flag.
+ If releasepage() fails for some reason, it must indicate failure
+ with a 0 return value. releasepage() is used in two distinct
+ though related cases. The first is when the VM finds a clean
+ page with no active users and wants to make it a free page. If
+ ->releasepage succeeds, the page will be removed from the
+ address_space and become free.
+
+ The second case is when a request has been made to invalidate
+ some or all pages in an address_space. This can happen through
+ the fadvise(POSIX_FADV_DONTNEED) system call or by the
+ filesystem explicitly requesting it as nfs and 9fs do (when they
+ believe the cache may be out of date with storage) by calling
+ invalidate_inode_pages2(). If the filesystem makes such a call,
+ and needs to be certain that all pages are invalidated, then its
+ releasepage will need to ensure this. Possibly it can clear the
+ PageUptodate bit if it cannot free private data yet.
+
+``freepage``
+ freepage is called once the page is no longer visible in the
+ page cache in order to allow the cleanup of any private data.
+ Since it may be called by the memory reclaimer, it should not
+ assume that the original address_space mapping still exists, and
+ it should not block.
+
+``direct_IO``
+ called by the generic read/write routines to perform direct_IO -
+ that is IO requests which bypass the page cache and transfer
+ data directly between the storage and the application's address
+ space.
+
+``isolate_page``
+ Called by the VM when isolating a movable non-lru page. If page
+ is successfully isolated, VM marks the page as PG_isolated via
+ __SetPageIsolated.
+
+``migrate_page``
+ This is used to compact the physical memory usage. If the VM
+ wants to relocate a page (maybe off a memory card that is
+ signalling imminent failure) it will pass a new page and an old
+ page to this function. migrate_page should transfer any private
+ data across and update any references that it has to the page.
+
+``putback_page``
+ Called by the VM when isolated page's migration fails.
+
+``launder_page``
+ Called before freeing a page - it writes back the dirty page.
+ To prevent redirtying the page, it is kept locked during the
+ whole operation.
+
+``is_partially_uptodate``
+ Called by the VM when reading a file through the pagecache when
+ the underlying blocksize != pagesize. If the required block is
+ up to date then the read can complete without needing the IO to
+ bring the whole page up to date.
+
+``is_dirty_writeback``
+ Called by the VM when attempting to reclaim a page. The VM uses
+ dirty and writeback information to determine if it needs to
+ stall to allow flushers a chance to complete some IO.
+ Ordinarily it can use PageDirty and PageWriteback but some
+ filesystems have more complex state (unstable pages in NFS
+ prevent reclaim) or do not set those flags due to locking
+ problems. This callback allows a filesystem to indicate to the
+ VM if a page should be treated as dirty or writeback for the
+ purposes of stalling.
+
+``error_remove_page``
+ normally set to generic_error_remove_page if truncation is ok
+ for this address space. Used for memory failure handling.
+ Setting this implies you deal with pages going away under you,
+ unless you have them locked or reference counts increased.
+
+``swap_activate``
+ Called when swapon is used on a file to allocate space if
+ necessary and pin the block lookup information in memory. A
+ return value of zero indicates success, in which case this file
+ can be used to back swapspace.
+
+``swap_deactivate``
+ Called during swapoff on files where swap_activate was
+ successful.
+
+
+The File Object
+===============
+
+A file object represents a file opened by a process. This is also known
+as an "open file description" in POSIX parlance.
+
+
+struct file_operations
+----------------------
+
+This describes how the VFS can manipulate an open file. As of kernel
+4.18, the following members are defined:
+
+.. code-block:: c
+
+ struct file_operations {
+ struct module *owner;
+ loff_t (*llseek) (struct file *, loff_t, int);
+ ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
+ ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
+ ssize_t (*read_iter) (struct kiocb *, struct iov_iter *);
+ ssize_t (*write_iter) (struct kiocb *, struct iov_iter *);
+ int (*iopoll)(struct kiocb *kiocb, bool spin);
+ int (*iterate) (struct file *, struct dir_context *);
+ int (*iterate_shared) (struct file *, struct dir_context *);
+ __poll_t (*poll) (struct file *, struct poll_table_struct *);
+ long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
+ long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
+ int (*mmap) (struct file *, struct vm_area_struct *);
+ int (*open) (struct inode *, struct file *);
+ int (*flush) (struct file *, fl_owner_t id);
+ int (*release) (struct inode *, struct file *);
+ int (*fsync) (struct file *, loff_t, loff_t, int datasync);
+ int (*fasync) (int, struct file *, int);
+ int (*lock) (struct file *, int, struct file_lock *);
+ ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);
+ unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
+ int (*check_flags)(int);
+ int (*flock) (struct file *, int, struct file_lock *);
+ ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int);
+ ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int);
+ int (*setlease)(struct file *, long, struct file_lock **, void **);
+ long (*fallocate)(struct file *file, int mode, loff_t offset,
+ loff_t len);
+ void (*show_fdinfo)(struct seq_file *m, struct file *f);
+ #ifndef CONFIG_MMU
+ unsigned (*mmap_capabilities)(struct file *);
+ #endif
+ ssize_t (*copy_file_range)(struct file *, loff_t, struct file *, loff_t, size_t, unsigned int);
+ loff_t (*remap_file_range)(struct file *file_in, loff_t pos_in,
+ struct file *file_out, loff_t pos_out,
+ loff_t len, unsigned int remap_flags);
+ int (*fadvise)(struct file *, loff_t, loff_t, int);
+ };
+
+Again, all methods are called without any locks being held, unless
+otherwise noted.
+
+``llseek``
+ called when the VFS needs to move the file position index
+
+``read``
+ called by read(2) and related system calls
+
+``read_iter``
+ possibly asynchronous read with iov_iter as destination
+
+``write``
+ called by write(2) and related system calls
+
+``write_iter``
+ possibly asynchronous write with iov_iter as source
+
+``iopoll``
+ called when aio wants to poll for completions on HIPRI iocbs
+
+``iterate``
+ called when the VFS needs to read the directory contents
+
+``iterate_shared``
+ called when the VFS needs to read the directory contents when
+ filesystem supports concurrent dir iterators
+
+``poll``
+ called by the VFS when a process wants to check if there is
+ activity on this file and (optionally) go to sleep until there
+ is activity. Called by the select(2) and poll(2) system calls
+
+``unlocked_ioctl``
+ called by the ioctl(2) system call.
+
+``compat_ioctl``
+ called by the ioctl(2) system call when 32 bit system calls are
+ used on 64 bit kernels.
+
+``mmap``
+ called by the mmap(2) system call
+
+``open``
+ called by the VFS when an inode should be opened. When the VFS
+ opens a file, it creates a new "struct file". It then calls the
+ open method for the newly allocated file structure. You might
+ think that the open method really belongs in "struct
+ inode_operations", and you may be right. I think it's done the
+ way it is because it makes filesystems simpler to implement.
+ The open() method is a good place to initialize the
+ "private_data" member in the file structure if you want to point
+ to a device structure
+
+``flush``
+ called by the close(2) system call to flush a file
+
+``release``
+ called when the last reference to an open file is closed
+
+``fsync``
+ called by the fsync(2) system call. Also see the section above
+ entitled "Handling errors during writeback".
+
+``fasync``
+ called by the fcntl(2) system call when asynchronous
+ (non-blocking) mode is enabled for a file
+
+``lock``
+ called by the fcntl(2) system call for F_GETLK, F_SETLK, and
+ F_SETLKW commands
+
+``get_unmapped_area``
+ called by the mmap(2) system call
+
+``check_flags``
+ called by the fcntl(2) system call for F_SETFL command
+
+``flock``
+ called by the flock(2) system call
+
+``splice_write``
+ called by the VFS to splice data from a pipe to a file. This
+ method is used by the splice(2) system call
+
+``splice_read``
+ called by the VFS to splice data from file to a pipe. This
+ method is used by the splice(2) system call
+
+``setlease``
+ called by the VFS to set or release a file lock lease. setlease
+ implementations should call generic_setlease to record or remove
+ the lease in the inode after setting it.
+
+``fallocate``
+ called by the VFS to preallocate blocks or punch a hole.
+
+``copy_file_range``
+ called by the copy_file_range(2) system call.
+
+``remap_file_range``
+ called by the ioctl(2) system call for FICLONERANGE and FICLONE
+ and FIDEDUPERANGE commands to remap file ranges. An
+ implementation should remap len bytes at pos_in of the source
+ file into the dest file at pos_out. Implementations must handle
+ callers passing in len == 0; this means "remap to the end of the
+ source file". The return value should the number of bytes
+ remapped, or the usual negative error code if errors occurred
+ before any bytes were remapped. The remap_flags parameter
+ accepts REMAP_FILE_* flags. If REMAP_FILE_DEDUP is set then the
+ implementation must only remap if the requested file ranges have
+ identical contents. If REMAP_CAN_SHORTEN is set, the caller is
+ ok with the implementation shortening the request length to
+ satisfy alignment or EOF requirements (or any other reason).
+
+``fadvise``
+ possibly called by the fadvise64() system call.
+
+Note that the file operations are implemented by the specific
+filesystem in which the inode resides. When opening a device node
+(character or block special) most filesystems will call special
+support routines in the VFS which will locate the required device
+driver information. These support routines replace the filesystem file
+operations with those for the device driver, and then proceed to call
+the new open() method for the file. This is how opening a device file
+in the filesystem eventually ends up calling the device driver open()
+method.
+
+
+Directory Entry Cache (dcache)
+==============================
+
+
+struct dentry_operations
+------------------------
+
+This describes how a filesystem can overload the standard dentry
+operations. Dentries and the dcache are the domain of the VFS and the
+individual filesystem implementations. Device drivers have no business
+here. These methods may be set to NULL, as they are either optional or
+the VFS uses a default. As of kernel 2.6.22, the following members are
+defined:
+
+.. code-block:: c
+
+ struct dentry_operations {
+ int (*d_revalidate)(struct dentry *, unsigned int);
+ int (*d_weak_revalidate)(struct dentry *, unsigned int);
+ int (*d_hash)(const struct dentry *, struct qstr *);
+ int (*d_compare)(const struct dentry *,
+ unsigned int, const char *, const struct qstr *);
+ int (*d_delete)(const struct dentry *);
+ int (*d_init)(struct dentry *);
+ void (*d_release)(struct dentry *);
+ void (*d_iput)(struct dentry *, struct inode *);
+ char *(*d_dname)(struct dentry *, char *, int);
+ struct vfsmount *(*d_automount)(struct path *);
+ int (*d_manage)(const struct path *, bool);
+ struct dentry *(*d_real)(struct dentry *, const struct inode *);
+ };
+
+``d_revalidate``
+ called when the VFS needs to revalidate a dentry. This is
+ called whenever a name look-up finds a dentry in the dcache.
+ Most local filesystems leave this as NULL, because all their
+ dentries in the dcache are valid. Network filesystems are
+ different since things can change on the server without the
+ client necessarily being aware of it.
+
+ This function should return a positive value if the dentry is
+ still valid, and zero or a negative error code if it isn't.
+
+ d_revalidate may be called in rcu-walk mode (flags &
+ LOOKUP_RCU). If in rcu-walk mode, the filesystem must
+ revalidate the dentry without blocking or storing to the dentry,
+ d_parent and d_inode should not be used without care (because
+ they can change and, in d_inode case, even become NULL under
+ us).
+
+ If a situation is encountered that rcu-walk cannot handle,
+ return
+ -ECHILD and it will be called again in ref-walk mode.
+
+``_weak_revalidate``
+ called when the VFS needs to revalidate a "jumped" dentry. This
+ is called when a path-walk ends at dentry that was not acquired
+ by doing a lookup in the parent directory. This includes "/",
+ "." and "..", as well as procfs-style symlinks and mountpoint
+ traversal.
+
+ In this case, we are less concerned with whether the dentry is
+ still fully correct, but rather that the inode is still valid.
+ As with d_revalidate, most local filesystems will set this to
+ NULL since their dcache entries are always valid.
+
+ This function has the same return code semantics as
+ d_revalidate.
+
+ d_weak_revalidate is only called after leaving rcu-walk mode.
+
+``d_hash``
+ called when the VFS adds a dentry to the hash table. The first
+ dentry passed to d_hash is the parent directory that the name is
+ to be hashed into.
+
+ Same locking and synchronisation rules as d_compare regarding
+ what is safe to dereference etc.
+
+``d_compare``
+ called to compare a dentry name with a given name. The first
+ dentry is the parent of the dentry to be compared, the second is
+ the child dentry. len and name string are properties of the
+ dentry to be compared. qstr is the name to compare it with.
+
+ Must be constant and idempotent, and should not take locks if
+ possible, and should not or store into the dentry. Should not
+ dereference pointers outside the dentry without lots of care
+ (eg. d_parent, d_inode, d_name should not be used).
+
+ However, our vfsmount is pinned, and RCU held, so the dentries
+ and inodes won't disappear, neither will our sb or filesystem
+ module. ->d_sb may be used.
+
+ It is a tricky calling convention because it needs to be called
+ under "rcu-walk", ie. without any locks or references on things.
+
+``d_delete``
+ called when the last reference to a dentry is dropped and the
+ dcache is deciding whether or not to cache it. Return 1 to
+ delete immediately, or 0 to cache the dentry. Default is NULL
+ which means to always cache a reachable dentry. d_delete must
+ be constant and idempotent.
+
+``d_init``
+ called when a dentry is allocated
+
+``d_release``
+ called when a dentry is really deallocated
+
+``d_iput``
+ called when a dentry loses its inode (just prior to its being
+ deallocated). The default when this is NULL is that the VFS
+ calls iput(). If you define this method, you must call iput()
+ yourself
+
+``d_dname``
+ called when the pathname of a dentry should be generated.
+ Useful for some pseudo filesystems (sockfs, pipefs, ...) to
+ delay pathname generation. (Instead of doing it when dentry is
+ created, it's done only when the path is needed.). Real
+ filesystems probably dont want to use it, because their dentries
+ are present in global dcache hash, so their hash should be an
+ invariant. As no lock is held, d_dname() should not try to
+ modify the dentry itself, unless appropriate SMP safety is used.
+ CAUTION : d_path() logic is quite tricky. The correct way to
+ return for example "Hello" is to put it at the end of the
+ buffer, and returns a pointer to the first char.
+ dynamic_dname() helper function is provided to take care of
+ this.
+
+ Example :
+
+.. code-block:: c
+
+ static char *pipefs_dname(struct dentry *dent, char *buffer, int buflen)
+ {
+ return dynamic_dname(dentry, buffer, buflen, "pipe:[%lu]",
+ dentry->d_inode->i_ino);
+ }
+
+``d_automount``
+ called when an automount dentry is to be traversed (optional).
+ This should create a new VFS mount record and return the record
+ to the caller. The caller is supplied with a path parameter
+ giving the automount directory to describe the automount target
+ and the parent VFS mount record to provide inheritable mount
+ parameters. NULL should be returned if someone else managed to
+ make the automount first. If the vfsmount creation failed, then
+ an error code should be returned. If -EISDIR is returned, then
+ the directory will be treated as an ordinary directory and
+ returned to pathwalk to continue walking.
+
+ If a vfsmount is returned, the caller will attempt to mount it
+ on the mountpoint and will remove the vfsmount from its
+ expiration list in the case of failure. The vfsmount should be
+ returned with 2 refs on it to prevent automatic expiration - the
+ caller will clean up the additional ref.
+
+ This function is only used if DCACHE_NEED_AUTOMOUNT is set on
+ the dentry. This is set by __d_instantiate() if S_AUTOMOUNT is
+ set on the inode being added.
+
+``d_manage``
+ called to allow the filesystem to manage the transition from a
+ dentry (optional). This allows autofs, for example, to hold up
+ clients waiting to explore behind a 'mountpoint' while letting
+ the daemon go past and construct the subtree there. 0 should be
+ returned to let the calling process continue. -EISDIR can be
+ returned to tell pathwalk to use this directory as an ordinary
+ directory and to ignore anything mounted on it and not to check
+ the automount flag. Any other error code will abort pathwalk
+ completely.
+
+ If the 'rcu_walk' parameter is true, then the caller is doing a
+ pathwalk in RCU-walk mode. Sleeping is not permitted in this
+ mode, and the caller can be asked to leave it and call again by
+ returning -ECHILD. -EISDIR may also be returned to tell
+ pathwalk to ignore d_automount or any mounts.
+
+ This function is only used if DCACHE_MANAGE_TRANSIT is set on
+ the dentry being transited from.
+
+``d_real``
+ overlay/union type filesystems implement this method to return
+ one of the underlying dentries hidden by the overlay. It is
+ used in two different modes:
+
+ Called from file_dentry() it returns the real dentry matching
+ the inode argument. The real dentry may be from a lower layer
+ already copied up, but still referenced from the file. This
+ mode is selected with a non-NULL inode argument.
+
+ With NULL inode the topmost real underlying dentry is returned.
+
+Each dentry has a pointer to its parent dentry, as well as a hash list
+of child dentries. Child dentries are basically like files in a
+directory.
+
+
+Directory Entry Cache API
+--------------------------
+
+There are a number of functions defined which permit a filesystem to
+manipulate dentries:
+
+``dget``
+ open a new handle for an existing dentry (this just increments
+ the usage count)
+
+``dput``
+ close a handle for a dentry (decrements the usage count). If
+ the usage count drops to 0, and the dentry is still in its
+ parent's hash, the "d_delete" method is called to check whether
+ it should be cached. If it should not be cached, or if the
+ dentry is not hashed, it is deleted. Otherwise cached dentries
+ are put into an LRU list to be reclaimed on memory shortage.
+
+``d_drop``
+ this unhashes a dentry from its parents hash list. A subsequent
+ call to dput() will deallocate the dentry if its usage count
+ drops to 0
+
+``d_delete``
+ delete a dentry. If there are no other open references to the
+ dentry then the dentry is turned into a negative dentry (the
+ d_iput() method is called). If there are other references, then
+ d_drop() is called instead
+
+``d_add``
+ add a dentry to its parents hash list and then calls
+ d_instantiate()
+
+``d_instantiate``
+ add a dentry to the alias hash list for the inode and updates
+ the "d_inode" member. The "i_count" member in the inode
+ structure should be set/incremented. If the inode pointer is
+ NULL, the dentry is called a "negative dentry". This function
+ is commonly called when an inode is created for an existing
+ negative dentry
+
+``d_lookup``
+ look up a dentry given its parent and path name component It
+ looks up the child of that given name from the dcache hash
+ table. If it is found, the reference count is incremented and
+ the dentry is returned. The caller must use dput() to free the
+ dentry when it finishes using it.
+
+
+Mount Options
+=============
+
+
+Parsing options
+---------------
+
+On mount and remount the filesystem is passed a string containing a
+comma separated list of mount options. The options can have either of
+these forms:
+
+ option
+ option=value
+
+The <linux/parser.h> header defines an API that helps parse these
+options. There are plenty of examples on how to use it in existing
+filesystems.
+
+
+Showing options
+---------------
+
+If a filesystem accepts mount options, it must define show_options() to
+show all the currently active options. The rules are:
+
+ - options MUST be shown which are not default or their values differ
+ from the default
+
+ - options MAY be shown which are enabled by default or have their
+ default value
+
+Options used only internally between a mount helper and the kernel (such
+as file descriptors), or which only have an effect during the mounting
+(such as ones controlling the creation of a journal) are exempt from the
+above rules.
+
+The underlying reason for the above rules is to make sure, that a mount
+can be accurately replicated (e.g. umounting and mounting again) based
+on the information found in /proc/mounts.
+
+
+Resources
+=========
+
+(Note some of these resources are not up-to-date with the latest kernel
+ version.)
+
+Creating Linux virtual filesystems. 2002
+ <http://lwn.net/Articles/13325/>
+
+The Linux Virtual File-system Layer by Neil Brown. 1999
+ <http://www.cse.unsw.edu.au/~neilb/oss/linux-commentary/vfs.html>
+
+A tour of the Linux VFS by Michael K. Johnson. 1996
+ <http://www.tldp.org/LDP/khg/HyperNews/get/fs/vfstour.html>
+
+A small trail through the Linux kernel by Andries Brouwer. 2001
+ <http://www.win.tue.nl/~aeb/linux/vfs/trail.html>