aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/spi/spi-davinci.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/spi/spi-davinci.txt')
-rw-r--r--Documentation/devicetree/bindings/spi/spi-davinci.txt9
1 files changed, 8 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
index 6d0ac8d0ad9b..f80887bca0d6 100644
--- a/Documentation/devicetree/bindings/spi/spi-davinci.txt
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -8,7 +8,8 @@ Required properties:
- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
- reg: Offset and length of SPI controller register space
-- num-cs: Number of chip selects
+- num-cs: Number of chip selects. This includes internal as well as
+ GPIO chip selects.
- ti,davinci-spi-intr-line: interrupt line used to connect the SPI
IP to the interrupt controller within the SoC. Possible values
are 0 and 1. Manual says one of the two possible interrupt
@@ -17,6 +18,12 @@ Required properties:
- interrupts: interrupt number mapped to CPU.
- clocks: spi clk phandle
+Optional:
+- cs-gpios: gpio chip selects
+ For example to have 3 internal CS and 2 GPIO CS, user could define
+ cs-gpios = <0>, <0>, <0>, <&gpio1 30 0>, <&gpio1 31 0>;
+ where first three are internal CS and last two are GPIO CS.
+
Example of a NOR flash slave device (n25q032) connected to DaVinci
SPI controller device over the SPI bus.