aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/ethernet/intel/e1000e/defines.h8
-rw-r--r--drivers/net/ethernet/intel/e1000e/hw.h8
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c324
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.h22
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c24
-rw-r--r--drivers/net/ethernet/intel/e1000e/regs.h1
6 files changed, 354 insertions, 33 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 1b7c26857881..d18e89212575 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -28,9 +28,11 @@
/* Definitions for power management and wakeup registers */
/* Wake Up Control */
-#define E1000_WUC_APME 0x00000001 /* APM Enable */
-#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
-#define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */
+#define E1000_WUC_APME 0x00000001 /* APM Enable */
+#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
+#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
+#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */
+#define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */
/* Wake Up Filter Control */
#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index 016028350150..6b3de5f39a97 100644
--- a/drivers/net/ethernet/intel/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -648,12 +648,20 @@ struct e1000_shadow_ram {
#define E1000_ICH8_SHADOW_RAM_WORDS 2048
+/* I218 PHY Ultra Low Power (ULP) states */
+enum e1000_ulp_state {
+ e1000_ulp_state_unknown,
+ e1000_ulp_state_off,
+ e1000_ulp_state_on,
+};
+
struct e1000_dev_spec_ich8lan {
bool kmrn_lock_loss_workaround_enabled;
struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS];
bool nvm_k1_enabled;
bool eee_disable;
u16 eee_lp_ability;
+ enum e1000_ulp_state ulp_state;
};
struct e1000_hw {
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 723410a60297..18984519a18d 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -143,7 +143,9 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index);
static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index);
static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
+static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force);
static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw);
+static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
@@ -240,6 +242,47 @@ out:
}
/**
+ * e1000_toggle_lanphypc_pch_lpt - toggle the LANPHYPC pin value
+ * @hw: pointer to the HW structure
+ *
+ * Toggling the LANPHYPC pin value fully power-cycles the PHY and is
+ * used to reset the PHY to a quiescent state when necessary.
+ **/
+static void e1000_toggle_lanphypc_pch_lpt(struct e1000_hw *hw)
+{
+ u32 mac_reg;
+
+ /* Set Phy Config Counter to 50msec */
+ mac_reg = er32(FEXTNVM3);
+ mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
+ mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
+ ew32(FEXTNVM3, mac_reg);
+
+ /* Toggle LANPHYPC Value bit */
+ mac_reg = er32(CTRL);
+ mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
+ mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE;
+ ew32(CTRL, mac_reg);
+ e1e_flush();
+ usleep_range(10, 20);
+ mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
+ ew32(CTRL, mac_reg);
+ e1e_flush();
+
+ if (hw->mac.type < e1000_pch_lpt) {
+ msleep(50);
+ } else {
+ u16 count = 20;
+
+ do {
+ usleep_range(5000, 10000);
+ } while (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LPCD) && count--);
+
+ msleep(30);
+ }
+}
+
+/**
* e1000_init_phy_workarounds_pchlan - PHY initialization workarounds
* @hw: pointer to the HW structure
*
@@ -257,6 +300,12 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
*/
e1000_gate_hw_phy_config_ich8lan(hw, true);
+ /* It is not possible to be certain of the current state of ULP
+ * so forcibly disable it.
+ */
+ hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_unknown;
+ e1000_disable_ulp_lpt_lp(hw, true);
+
ret_val = hw->phy.ops.acquire(hw);
if (ret_val) {
e_dbg("Failed to initialize PHY flow\n");
@@ -302,33 +351,9 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
break;
}
- e_dbg("Toggling LANPHYPC\n");
-
- /* Set Phy Config Counter to 50msec */
- mac_reg = er32(FEXTNVM3);
- mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
- mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
- ew32(FEXTNVM3, mac_reg);
-
/* Toggle LANPHYPC Value bit */
- mac_reg = er32(CTRL);
- mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
- mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE;
- ew32(CTRL, mac_reg);
- e1e_flush();
- usleep_range(10, 20);
- mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
- ew32(CTRL, mac_reg);
- e1e_flush();
- if (hw->mac.type < e1000_pch_lpt) {
- msleep(50);
- } else {
- u16 count = 20;
- do {
- usleep_range(5000, 10000);
- } while (!(er32(CTRL_EXT) &
- E1000_CTRL_EXT_LPCD) && count--);
- usleep_range(30000, 60000);
+ e1000_toggle_lanphypc_pch_lpt(hw);
+ if (hw->mac.type >= e1000_pch_lpt) {
if (e1000_phy_is_accessible_pchlan(hw))
break;
@@ -1006,6 +1031,253 @@ static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link)
}
/**
+ * e1000_enable_ulp_lpt_lp - configure Ultra Low Power mode for LynxPoint-LP
+ * @hw: pointer to the HW structure
+ * @to_sx: boolean indicating a system power state transition to Sx
+ *
+ * When link is down, configure ULP mode to significantly reduce the power
+ * to the PHY. If on a Manageability Engine (ME) enabled system, tell the
+ * ME firmware to start the ULP configuration. If not on an ME enabled
+ * system, configure the ULP mode by software.
+ */
+s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx)
+{
+ u32 mac_reg;
+ s32 ret_val = 0;
+ u16 phy_reg;
+
+ if ((hw->mac.type < e1000_pch_lpt) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) ||
+ (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_on))
+ return 0;
+
+ if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
+ /* Request ME configure ULP mode in the PHY */
+ mac_reg = er32(H2ME);
+ mac_reg |= E1000_H2ME_ULP | E1000_H2ME_ENFORCE_SETTINGS;
+ ew32(H2ME, mac_reg);
+
+ goto out;
+ }
+
+ if (!to_sx) {
+ int i = 0;
+
+ /* Poll up to 5 seconds for Cable Disconnected indication */
+ while (!(er32(FEXT) & E1000_FEXT_PHY_CABLE_DISCONNECTED)) {
+ /* Bail if link is re-acquired */
+ if (er32(STATUS) & E1000_STATUS_LU)
+ return -E1000_ERR_PHY;
+
+ if (i++ == 100)
+ break;
+
+ msleep(50);
+ }
+ e_dbg("CABLE_DISCONNECTED %s set after %dmsec\n",
+ (er32(FEXT) &
+ E1000_FEXT_PHY_CABLE_DISCONNECTED) ? "" : "not", i * 50);
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ /* Force SMBus mode in PHY */
+ ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
+ if (ret_val)
+ goto release;
+ phy_reg |= CV_SMB_CTRL_FORCE_SMBUS;
+ e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);
+
+ /* Force SMBus mode in MAC */
+ mac_reg = er32(CTRL_EXT);
+ mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_reg);
+
+ /* Set Inband ULP Exit, Reset to SMBus mode and
+ * Disable SMBus Release on PERST# in PHY
+ */
+ ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg);
+ if (ret_val)
+ goto release;
+ phy_reg |= (I218_ULP_CONFIG1_RESET_TO_SMBUS |
+ I218_ULP_CONFIG1_DISABLE_SMB_PERST);
+ if (to_sx) {
+ if (er32(WUFC) & E1000_WUFC_LNKC)
+ phy_reg |= I218_ULP_CONFIG1_WOL_HOST;
+
+ phy_reg |= I218_ULP_CONFIG1_STICKY_ULP;
+ } else {
+ phy_reg |= I218_ULP_CONFIG1_INBAND_EXIT;
+ }
+ e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+
+ /* Set Disable SMBus Release on PERST# in MAC */
+ mac_reg = er32(FEXTNVM7);
+ mac_reg |= E1000_FEXTNVM7_DISABLE_SMB_PERST;
+ ew32(FEXTNVM7, mac_reg);
+
+ /* Commit ULP changes in PHY by starting auto ULP configuration */
+ phy_reg |= I218_ULP_CONFIG1_START;
+ e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+release:
+ hw->phy.ops.release(hw);
+out:
+ if (ret_val)
+ e_dbg("Error in ULP enable flow: %d\n", ret_val);
+ else
+ hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_on;
+
+ return ret_val;
+}
+
+/**
+ * e1000_disable_ulp_lpt_lp - unconfigure Ultra Low Power mode for LynxPoint-LP
+ * @hw: pointer to the HW structure
+ * @force: boolean indicating whether or not to force disabling ULP
+ *
+ * Un-configure ULP mode when link is up, the system is transitioned from
+ * Sx or the driver is unloaded. If on a Manageability Engine (ME) enabled
+ * system, poll for an indication from ME that ULP has been un-configured.
+ * If not on an ME enabled system, un-configure the ULP mode by software.
+ *
+ * During nominal operation, this function is called when link is acquired
+ * to disable ULP mode (force=false); otherwise, for example when unloading
+ * the driver or during Sx->S0 transitions, this is called with force=true
+ * to forcibly disable ULP.
+ */
+static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force)
+{
+ s32 ret_val = 0;
+ u32 mac_reg;
+ u16 phy_reg;
+ int i = 0;
+
+ if ((hw->mac.type < e1000_pch_lpt) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) ||
+ (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_off))
+ return 0;
+
+ if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
+ if (force) {
+ /* Request ME un-configure ULP mode in the PHY */
+ mac_reg = er32(H2ME);
+ mac_reg &= ~E1000_H2ME_ULP;
+ mac_reg |= E1000_H2ME_ENFORCE_SETTINGS;
+ ew32(H2ME, mac_reg);
+ }
+
+ /* Poll up to 100msec for ME to clear ULP_CFG_DONE */
+ while (er32(FWSM) & E1000_FWSM_ULP_CFG_DONE) {
+ if (i++ == 10) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ usleep_range(10000, 20000);
+ }
+ e_dbg("ULP_CONFIG_DONE cleared after %dmsec\n", i * 10);
+
+ if (force) {
+ mac_reg = er32(H2ME);
+ mac_reg &= ~E1000_H2ME_ENFORCE_SETTINGS;
+ ew32(H2ME, mac_reg);
+ } else {
+ /* Clear H2ME.ULP after ME ULP configuration */
+ mac_reg = er32(H2ME);
+ mac_reg &= ~E1000_H2ME_ULP;
+ ew32(H2ME, mac_reg);
+ }
+
+ goto out;
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ if (force)
+ /* Toggle LANPHYPC Value bit */
+ e1000_toggle_lanphypc_pch_lpt(hw);
+
+ /* Unforce SMBus mode in PHY */
+ ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
+ if (ret_val) {
+ /* The MAC might be in PCIe mode, so temporarily force to
+ * SMBus mode in order to access the PHY.
+ */
+ mac_reg = er32(CTRL_EXT);
+ mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_reg);
+
+ msleep(50);
+
+ ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL,
+ &phy_reg);
+ if (ret_val)
+ goto release;
+ }
+ phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
+ e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);
+
+ /* Unforce SMBus mode in MAC */
+ mac_reg = er32(CTRL_EXT);
+ mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_reg);
+
+ /* When ULP mode was previously entered, K1 was disabled by the
+ * hardware. Re-Enable K1 in the PHY when exiting ULP.
+ */
+ ret_val = e1000_read_phy_reg_hv_locked(hw, HV_PM_CTRL, &phy_reg);
+ if (ret_val)
+ goto release;
+ phy_reg |= HV_PM_CTRL_K1_ENABLE;
+ e1000_write_phy_reg_hv_locked(hw, HV_PM_CTRL, phy_reg);
+
+ /* Clear ULP enabled configuration */
+ ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg);
+ if (ret_val)
+ goto release;
+ phy_reg &= ~(I218_ULP_CONFIG1_IND |
+ I218_ULP_CONFIG1_STICKY_ULP |
+ I218_ULP_CONFIG1_RESET_TO_SMBUS |
+ I218_ULP_CONFIG1_WOL_HOST |
+ I218_ULP_CONFIG1_INBAND_EXIT |
+ I218_ULP_CONFIG1_DISABLE_SMB_PERST);
+ e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+
+ /* Commit ULP changes by starting auto ULP configuration */
+ phy_reg |= I218_ULP_CONFIG1_START;
+ e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+
+ /* Clear Disable SMBus Release on PERST# in MAC */
+ mac_reg = er32(FEXTNVM7);
+ mac_reg &= ~E1000_FEXTNVM7_DISABLE_SMB_PERST;
+ ew32(FEXTNVM7, mac_reg);
+
+release:
+ hw->phy.ops.release(hw);
+ if (force) {
+ e1000_phy_hw_reset(hw);
+ msleep(50);
+ }
+out:
+ if (ret_val)
+ e_dbg("Error in ULP disable flow: %d\n", ret_val);
+ else
+ hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_off;
+
+ return ret_val;
+}
+
+/**
* e1000_check_for_copper_link_ich8lan - Check for link (Copper)
* @hw: pointer to the HW structure
*
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index 51e0b157a731..553f05ec0278 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -58,11 +58,16 @@
#define E1000_FWSM_WLOCK_MAC_MASK 0x0380
#define E1000_FWSM_WLOCK_MAC_SHIFT 7
+#define E1000_FWSM_ULP_CFG_DONE 0x00000400 /* Low power cfg done */
/* Shared Receive Address Registers */
#define E1000_SHRAL_PCH_LPT(_i) (0x05408 + ((_i) * 8))
#define E1000_SHRAH_PCH_LPT(_i) (0x0540C + ((_i) * 8))
+#define E1000_H2ME 0x05B50 /* Host to ME */
+#define E1000_H2ME_ULP 0x00000800 /* ULP Indication Bit */
+#define E1000_H2ME_ENFORCE_SETTINGS 0x00001000 /* Enforce Settings */
+
#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \
(ID_LED_OFF1_OFF2 << 8) | \
(ID_LED_OFF1_ON2 << 4) | \
@@ -75,6 +80,9 @@
#define E1000_ICH8_LAN_INIT_TIMEOUT 1500
+/* FEXT register bit definition */
+#define E1000_FEXT_PHY_CABLE_DISCONNECTED 0x00000004
+
#define E1000_FEXTNVM_SW_CONFIG 1
#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* different on ICH8M */
@@ -88,6 +96,8 @@
#define E1000_FEXTNVM6_REQ_PLL_CLK 0x00000100
#define E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION 0x00000200
+#define E1000_FEXTNVM7_DISABLE_SMB_PERST 0x00000020
+
#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL
#define E1000_ICH_RAR_ENTRIES 7
@@ -154,6 +164,16 @@
#define CV_SMB_CTRL PHY_REG(769, 23)
#define CV_SMB_CTRL_FORCE_SMBUS 0x0001
+/* I218 Ultra Low Power Configuration 1 Register */
+#define I218_ULP_CONFIG1 PHY_REG(779, 16)
+#define I218_ULP_CONFIG1_START 0x0001 /* Start auto ULP config */
+#define I218_ULP_CONFIG1_IND 0x0004 /* Pwr up from ULP indication */
+#define I218_ULP_CONFIG1_STICKY_ULP 0x0010 /* Set sticky ULP mode */
+#define I218_ULP_CONFIG1_INBAND_EXIT 0x0020 /* Inband on ULP exit */
+#define I218_ULP_CONFIG1_WOL_HOST 0x0040 /* WoL Host on ULP exit */
+#define I218_ULP_CONFIG1_RESET_TO_SMBUS 0x0100 /* Reset to SMBus mode */
+#define I218_ULP_CONFIG1_DISABLE_SMB_PERST 0x1000 /* Disable on PERST# */
+
/* SMBus Address Phy Register */
#define HV_SMB_ADDR PHY_REG(768, 26)
#define HV_SMB_ADDR_MASK 0x007F
@@ -188,6 +208,7 @@
/* PHY Power Management Control */
#define HV_PM_CTRL PHY_REG(770, 17)
#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100
+#define HV_PM_CTRL_K1_ENABLE 0x4000
#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in ms */
@@ -262,4 +283,5 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);
s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data);
s32 e1000_set_eee_pchlan(struct e1000_hw *hw);
+s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx);
#endif /* _E1000E_ICH8LAN_H_ */
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 7fd1feaeb405..5129c4cd14bc 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5856,7 +5856,7 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
{
struct e1000_hw *hw = &adapter->hw;
- u32 i, mac_reg;
+ u32 i, mac_reg, wuc;
u16 phy_reg, wuc_enable;
int retval;
@@ -5903,13 +5903,18 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
phy_reg |= BM_RCTL_RFCE;
hw->phy.ops.write_reg_page(&adapter->hw, BM_RCTL, phy_reg);
+ wuc = E1000_WUC_PME_EN;
+ if (wufc & (E1000_WUFC_MAG | E1000_WUFC_LNKC))
+ wuc |= E1000_WUC_APME;
+
/* enable PHY wakeup in MAC register */
ew32(WUFC, wufc);
- ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN);
+ ew32(WUC, (E1000_WUC_PHY_WAKE | E1000_WUC_APMPME |
+ E1000_WUC_PME_STATUS | wuc));
/* configure and enable PHY wakeup in PHY registers */
hw->phy.ops.write_reg_page(&adapter->hw, BM_WUFC, wufc);
- hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
+ hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, wuc);
/* activate PHY wakeup */
wuc_enable |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
@@ -6012,8 +6017,19 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
e1000_power_down_phy(adapter);
}
- if (adapter->hw.phy.type == e1000_phy_igp_3)
+ if (adapter->hw.phy.type == e1000_phy_igp_3) {
e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
+ } else if (hw->mac.type == e1000_pch_lpt) {
+ if (!(wufc & (E1000_WUFC_EX | E1000_WUFC_MC | E1000_WUFC_BC)))
+ /* ULP does not support wake from unicast, multicast
+ * or broadcast.
+ */
+ retval = e1000_enable_ulp_lpt_lp(hw, !runtime);
+
+ if (retval)
+ return retval;
+ }
+
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant.
diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h
index 5c55ef348fc2..ea235bbe50d3 100644
--- a/drivers/net/ethernet/intel/e1000e/regs.h
+++ b/drivers/net/ethernet/intel/e1000e/regs.h
@@ -32,6 +32,7 @@
#define E1000_SCTL 0x00024 /* SerDes Control - RW */
#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
+#define E1000_FEXT 0x0002C /* Future Extended - RW */
#define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */
#define E1000_FEXTNVM3 0x0003C /* Future Extended NVM 3 - RW */
#define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-11 06:27:52 +0000