drm/i915: power domains: add vlv power wells

Based on an early draft from Jesse.

Add support for powering on/off the dynamic power wells on VLV by
registering its display and dpio dynamic power wells with the power
domain framework.

For now power on all PHY TX lanes regardless of the actual lane
configuration. Later this can be optimized when the PHY side setup
enables only the required lanes. Atm, it enables all lanes in all
cases.

v2:
- undef function local COND macro after its last use (Ville)
- Take dev_priv->irq_lock around the whole sequence of
  intel_set_cpu_fifo_underrun_reporting_nolock() and
  valleyview_disable_display_irqs(). They are short and releasing
  the lock in between only makes proving correctness more difficult.
- sanitize local var names in vlv_power_well_enabled()
v3:
- rebase on latest -nightly

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Resolve conflict due to my changes in the previous patch.
Also throw in an assert_spin_locked for safety. And finally appease
checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 236 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 5b039ca13927..030880a2cf4e 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -5411,6 +5411,140 @@ static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv,
 	return true;
 }
 
+static void vlv_set_power_well(struct drm_i915_private *dev_priv,
+			       struct i915_power_well *power_well, bool enable)
+{
+	enum punit_power_well power_well_id = power_well->data;
+	u32 mask;
+	u32 state;
+	u32 ctrl;
+
+	mask = PUNIT_PWRGT_MASK(power_well_id);
+	state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) :
+			 PUNIT_PWRGT_PWR_GATE(power_well_id);
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+
+#define COND \
+	((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state)
+
+	if (COND)
+		goto out;
+
+	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL);
+	ctrl &= ~mask;
+	ctrl |= state;
+	vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl);
+
+	if (wait_for(COND, 100))
+		DRM_ERROR("timout setting power well state %08x (%08x)\n",
+			  state,
+			  vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL));
+
+#undef COND
+
+out:
+	mutex_unlock(&dev_priv->rps.hw_lock);
+}
+
+static void vlv_power_well_sync_hw(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	vlv_set_power_well(dev_priv, power_well, power_well->count > 0);
+}
+
+static void vlv_power_well_enable(struct drm_i915_private *dev_priv,
+				  struct i915_power_well *power_well)
+{
+	vlv_set_power_well(dev_priv, power_well, true);
+}
+
+static void vlv_power_well_disable(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	vlv_set_power_well(dev_priv, power_well, false);
+}
+
+static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	int power_well_id = power_well->data;
+	bool enabled = false;
+	u32 mask;
+	u32 state;
+	u32 ctrl;
+
+	mask = PUNIT_PWRGT_MASK(power_well_id);
+	ctrl = PUNIT_PWRGT_PWR_ON(power_well_id);
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+
+	state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask;
+	/*
+	 * We only ever set the power-on and power-gate states, anything
+	 * else is unexpected.
+	 */
+	WARN_ON(state != PUNIT_PWRGT_PWR_ON(power_well_id) &&
+		state != PUNIT_PWRGT_PWR_GATE(power_well_id));
+	if (state == ctrl)
+		enabled = true;
+
+	/*
+	 * A transient state at this point would mean some unexpected party
+	 * is poking at the power controls too.
+	 */
+	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask;
+	WARN_ON(ctrl != state);
+
+	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	return enabled;
+}
+
+static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
+					  struct i915_power_well *power_well)
+{
+	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
+
+	vlv_set_power_well(dev_priv, power_well, true);
+
+	spin_lock_irq(&dev_priv->irq_lock);
+	valleyview_enable_display_irqs(dev_priv);
+	spin_unlock_irq(&dev_priv->irq_lock);
+
+	/*
+	 * During driver initialization we need to defer enabling hotplug
+	 * processing until fbdev is set up.
+	 */
+	if (dev_priv->enable_hotplug_processing)
+		intel_hpd_init(dev_priv->dev);
+
+	i915_redisable_vga_power_on(dev_priv->dev);
+}
+
+static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
+					   struct i915_power_well *power_well)
+{
+	struct drm_device *dev = dev_priv->dev;
+	enum pipe pipe;
+
+	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
+
+	spin_lock_irq(&dev_priv->irq_lock);
+	for_each_pipe(pipe)
+		__intel_set_cpu_fifo_underrun_reporting(dev, pipe, false);
+
+	valleyview_disable_display_irqs(dev_priv);
+	spin_unlock_irq(&dev_priv->irq_lock);
+
+	spin_lock_irq(&dev->vbl_lock);
+	for_each_pipe(pipe)
+		reset_vblank_counter(dev, pipe);
+	spin_unlock_irq(&dev->vbl_lock);
+
+	vlv_set_power_well(dev_priv, power_well, false);
+}
+
 static void check_power_well_state(struct drm_i915_private *dev_priv,
 				   struct i915_power_well *power_well)
 {
@@ -5543,6 +5677,35 @@ EXPORT_SYMBOL_GPL(i915_release_power_well);
 	(POWER_DOMAIN_MASK & ~BDW_ALWAYS_ON_POWER_DOMAINS) |	\
 	BIT(POWER_DOMAIN_INIT))
 
+#define VLV_ALWAYS_ON_POWER_DOMAINS	BIT(POWER_DOMAIN_INIT)
+#define VLV_DISPLAY_POWER_DOMAINS	POWER_DOMAIN_MASK
+
+#define VLV_DPIO_CMN_BC_POWER_DOMAINS (		\
+	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_CRT) |		\
+	BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
 static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
 	.sync_hw = i9xx_always_on_power_well_noop,
 	.enable = i9xx_always_on_power_well_noop,
@@ -5594,6 +5757,77 @@ static struct i915_power_well bdw_power_wells[] = {
 	},
 };
 
+static const struct i915_power_well_ops vlv_display_power_well_ops = {
+	.sync_hw = vlv_power_well_sync_hw,
+	.enable = vlv_display_power_well_enable,
+	.disable = vlv_display_power_well_disable,
+	.is_enabled = vlv_power_well_enabled,
+};
+
+static const struct i915_power_well_ops vlv_dpio_power_well_ops = {
+	.sync_hw = vlv_power_well_sync_hw,
+	.enable = vlv_power_well_enable,
+	.disable = vlv_power_well_disable,
+	.is_enabled = vlv_power_well_enabled,
+};
+
+static struct i915_power_well vlv_power_wells[] = {
+	{
+		.name = "always-on",
+		.always_on = 1,
+		.domains = VLV_ALWAYS_ON_POWER_DOMAINS,
+		.ops = &i9xx_always_on_power_well_ops,
+	},
+	{
+		.name = "display",
+		.domains = VLV_DISPLAY_POWER_DOMAINS,
+		.data = PUNIT_POWER_WELL_DISP2D,
+		.ops = &vlv_display_power_well_ops,
+	},
+	{
+		.name = "dpio-common",
+		.domains = VLV_DPIO_CMN_BC_POWER_DOMAINS,
+		.data = PUNIT_POWER_WELL_DPIO_CMN_BC,
+		.ops = &vlv_dpio_power_well_ops,
+	},
+	{
+		.name = "dpio-tx-b-01",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01,
+	},
+	{
+		.name = "dpio-tx-b-23",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23,
+	},
+	{
+		.name = "dpio-tx-c-01",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01,
+	},
+	{
+		.name = "dpio-tx-c-23",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
+	},
+};
+
 #define set_power_wells(power_domains, __power_wells) ({		\
 	(power_domains)->power_wells = (__power_wells);			\
 	(power_domains)->power_well_count = ARRAY_SIZE(__power_wells);	\
@@ -5615,6 +5849,8 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
 	} else if (IS_BROADWELL(dev_priv->dev)) {
 		set_power_wells(power_domains, bdw_power_wells);
 		hsw_pwr = power_domains;
+	} else if (IS_VALLEYVIEW(dev_priv->dev)) {
+		set_power_wells(power_domains, vlv_power_wells);
 	} else {
 		set_power_wells(power_domains, i9xx_always_on_power_well);
 	}