Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT and DT-conversion-related changes for various ARM platforms.  Most
  of these are to enable various devices on various boards, etc, and not
  necessarily worth enumerating.

  New boards and systems continue to come in as new devicetree files
  that don't require corresponding C changes any more, which is
  indicating that the system is starting to work fairly well.

  A few things worth pointing out:

   * ST Ericsson ux500 platforms have made the major push to move over
     to fully support the platform with DT
   * Renesas platforms continue their conversion over from legacy
     platform devices to DT-based for hardware description"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits)
  ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
  ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
  ARM: dts: sirf: add lost minigpsrtc device node
  ARM: dts: sirf: add clock, frequence-voltage table for CPU0
  ARM: dts: sirf: add lost bus_width, clock and status for sdhci
  ARM: dts: sirf: add lost clocks for cphifbg
  ARM: dts: socfpga: add pl330 clock
  ARM: dts: socfpga: update L2 tag and data latency
  arm: sun7i: cubietruck: Enable the i2c controllers
  ARM: dts: add support for EXYNOS4412 based TINY4412 board
  ARM: dts: Add initial support for Arndale Octa board
  ARM: bcm2835: add USB controller to device tree
  ARM: dts: MSM8974: Add MMIO architected timer node
  ARM: dts: MSM8974: Add restart node
  ARM: dts: sun7i: external clock outputs
  ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style
  ARM: dts: sun7i: Add pin muxing options for clock outputs
  ARM: dts: sun7i: Add rtp controller node
  ARM: dts: sun5i: Add rtp controller node
  ARM: dts: sun4i: Add rtp controller node
  ...

16 files changed, 34 insertions, 1094 deletions

diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 616b96e86ad4..d05ba759da30 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,10 +2,10 @@
 # Makefile for the linux kernel, U8500 machine.
 #
 
-obj-y				:= cpu.o devices.o id.o timer.o pm.o
+obj-y				:= cpu.o id.o timer.o pm.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
-obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
-obj-$(CONFIG_MACH_MOP500)	+= board-mop500.o board-mop500-sdi.o \
+obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o
+obj-$(CONFIG_MACH_MOP500)	+= board-mop500-sdi.o \
 				board-mop500-regulators.o \
 				board-mop500-pins.o \
 				board-mop500-audio.o
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index 43d6cb8c381d..9309ad4cbd09 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -7,16 +7,13 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
 #include <linux/platform_data/dma-ste-dma40.h>
 
-#include "devices.h"
 #include "irqs.h"
 #include <linux/platform_data/asoc-ux500-msp.h>
 
 #include "ste-dma40-db8500.h"
 #include "board-mop500.h"
-#include "devices-db8500.h"
 
 static struct stedma40_chan_cfg msp0_dma_rx = {
 	.high_priority = true,
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 0efb1560fc35..f63619b69113 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -10,94 +10,18 @@
 #include <linux/string.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <asm/mach-types.h>
 
 #include "board-mop500.h"
 
-enum custom_pin_cfg_t {
-	PINS_FOR_DEFAULT,
-	PINS_FOR_U9500,
-};
-
-static enum custom_pin_cfg_t pinsfor;
-
 /* These simply sets bias for pins */
 #define BIAS(a,b) static unsigned long a[] = { b }
 
-BIAS(pd, PIN_PULL_DOWN);
-BIAS(in_nopull, PIN_INPUT_NOPULL);
-BIAS(in_nopull_slpm_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE);
-BIAS(in_pu, PIN_INPUT_PULLUP);
-BIAS(in_pd, PIN_INPUT_PULLDOWN);
-BIAS(out_hi, PIN_OUTPUT_HIGH);
-BIAS(out_lo, PIN_OUTPUT_LOW);
-BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE);
-
 BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0));
 BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1));
 BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0));
 
-/* These also force them into GPIO mode */
-BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED);
-BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED);
-BIAS(gpio_in_pu_slpm_gpio_nopull, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
-BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
-BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED);
-BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED);
-/* Sleep modes */
-BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_in_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
-BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
-BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH|
-	PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_in_pu_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_PULLUP|
-	PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
-BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED|
-	PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(out_lo_wkup_pdis, PIN_SLPM_OUTPUT_LOW|
-	PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(in_wkup_pdis_en, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|
-	PIN_SLPM_PDIS_ENABLED);
-BIAS(in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|
-	PIN_SLPM_PDIS_DISABLED);
-BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|
-	PIN_SLPM_PDIS_DISABLED);
-
-/* We use these to define hog settings that are always done on boot */
-#define DB8500_MUX_HOG(group,func) \
-	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func)
-#define DB8500_PIN_HOG(pin,conf) \
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf)
-
-/* These are default states associated with device and changed runtime */
-#define DB8500_MUX(group,func,dev) \
-	PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func)
-#define DB8500_PIN(pin,conf,dev) \
-	PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf)
-#define DB8500_PIN_IDLE(pin, conf, dev) \
-	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_IDLE, "pinctrl-db8500",	\
-			    pin, conf)
-#define DB8500_PIN_SLEEP(pin, conf, dev) \
-	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500",	\
-			    pin, conf)
-#define DB8500_MUX_STATE(group, func, dev, state) \
-	PIN_MAP_MUX_GROUP(dev, state, "pinctrl-db8500", group, func)
-#define DB8500_PIN_STATE(pin, conf, dev, state) \
-	PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-db8500", pin, conf)
-
 #define AB8500_MUX_HOG(group, func) \
 	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8500.0", group, func)
 #define AB8500_PIN_HOG(pin, conf) \
@@ -344,725 +268,8 @@ static struct pinctrl_map __initdata ab8505_pinmap[] = {
 	AB8505_PIN_HOG("GPIO53_D15", in_pd),
 };
 
-/* Pin control settings */
-static struct pinctrl_map __initdata mop500_family_pinmap[] = {
-	/*
-	 * uMSP0, mux in 4 pins, regular placement of RX/TX
-	 * explicitly set the pins to no pull
-	 */
-	DB8500_MUX_HOG("msp0txrx_a_1", "msp0"),
-	DB8500_MUX_HOG("msp0tfstck_a_1", "msp0"),
-	DB8500_PIN_HOG("GPIO12_AC4", in_nopull), /* TXD */
-	DB8500_PIN_HOG("GPIO15_AC3", in_nopull), /* RXD */
-	DB8500_PIN_HOG("GPIO13_AF3", in_nopull), /* TFS */
-	DB8500_PIN_HOG("GPIO14_AE3", in_nopull), /* TCK */
-	/* MSP2 for HDMI, pull down TXD, TCK, TFS  */
-	DB8500_MUX_HOG("msp2_a_1", "msp2"),
-	DB8500_PIN_HOG("GPIO193_AH27", in_pd), /* TXD */
-	DB8500_PIN_HOG("GPIO194_AF27", in_pd), /* TCK */
-	DB8500_PIN_HOG("GPIO195_AG28", in_pd), /* TFS */
-	DB8500_PIN_HOG("GPIO196_AG26", out_lo), /* RXD */
-	/*
-	 * LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to
-	 * pull-up
-	 * TODO: is this really correct? Snowball doesn't have a LCD.
-	 */
-	DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"),
-	DB8500_PIN_HOG("GPIO68_E1", in_pu),
-	DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu),
-	/*
-	 * STMPE1601/tc35893 keypad IRQ GPIO 218
-	 * TODO: set for snowball and HREF really??
-	 */
-	DB8500_PIN_HOG("GPIO218_AH11", gpio_in_pu),
-	/*
-	 * UART0, we do not mux in u0 here.
-	 * uart-0 pins gpio configuration should be kept intact to prevent
-	 * a glitch in tx line when the tty dev is opened. Later these pins
-	 * are configured by uart driver
-	 */
-	DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */
-	DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */
-	DB8500_PIN_HOG("GPIO2_AH4", in_pu), /* RXD */
-	DB8500_PIN_HOG("GPIO3_AH3", out_hi), /* TXD */
-	/*
-	 * Mux in UART2 on altfunction C and set pull-ups.
-	 * TODO: is this used on U8500 variants and Snowball really?
-	 * The setting on GPIO31 conflicts with magnetometer use on hrefv60
-	 */
-	/* default state for UART2 */
-	DB8500_MUX("u2rxtx_c_1", "u2", "uart2"),
-	DB8500_PIN("GPIO29_W2", in_pu, "uart2"), /* RXD */
-	DB8500_PIN("GPIO30_W3", out_hi, "uart2"), /* TXD */
-	/* Sleep state for UART2 */
-	DB8500_PIN_SLEEP("GPIO29_W2", in_wkup_pdis, "uart2"),
-	DB8500_PIN_SLEEP("GPIO30_W3", out_wkup_pdis, "uart2"),
-	/*
-	 * The following pin sets were known as "runtime pins" before being
-	 * converted to the pinctrl model. Here we model them as "default"
-	 * states.
-	 */
-	/* Mux in UART0 after initialization */
-	DB8500_MUX("u0_a_1", "u0", "uart0"),
-	DB8500_PIN("GPIO0_AJ5", in_pu, "uart0"), /* CTS */
-	DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */
-	DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */
-	DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */
-	/* Sleep state for UART0 */
-	DB8500_PIN_SLEEP("GPIO0_AJ5", slpm_in_wkup_pdis, "uart0"),
-	DB8500_PIN_SLEEP("GPIO1_AJ3", slpm_out_hi_wkup_pdis, "uart0"),
-	DB8500_PIN_SLEEP("GPIO2_AH4", slpm_in_wkup_pdis, "uart0"),
-	DB8500_PIN_SLEEP("GPIO3_AH3", slpm_out_wkup_pdis, "uart0"),
-	/* Mux in UART1 after initialization */
-	DB8500_MUX("u1rxtx_a_1", "u1", "uart1"),
-	DB8500_PIN("GPIO4_AH6", in_pu, "uart1"), /* RXD */
-	DB8500_PIN("GPIO5_AG6", out_hi, "uart1"), /* TXD */
-	/* Sleep state for UART1 */
-	DB8500_PIN_SLEEP("GPIO4_AH6", slpm_in_wkup_pdis, "uart1"),
-	DB8500_PIN_SLEEP("GPIO5_AG6", slpm_out_wkup_pdis, "uart1"),
-	/* MSP1 for ALSA codec */
-	DB8500_MUX_HOG("msp1txrx_a_1", "msp1"),
-	DB8500_MUX_HOG("msp1_a_1", "msp1"),
-	DB8500_PIN_HOG("GPIO33_AF2", out_lo_slpm_nowkup),
-	DB8500_PIN_HOG("GPIO34_AE1", in_nopull_slpm_nowkup),
-	DB8500_PIN_HOG("GPIO35_AE2", in_nopull_slpm_nowkup),
-	DB8500_PIN_HOG("GPIO36_AG2", in_nopull_slpm_nowkup),
-	/* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */
-	DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
-	DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),
-	/* Mux in LCD VSI1 and pull it up for MCDE HDMI output */
-	DB8500_MUX("lcdvsi1_a_1", "lcd", "0-0070"),
-	DB8500_PIN("GPIO69_E2", in_pu, "0-0070"),
-	/* LCD VSI1 sleep state */
-	DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"),
-	/* Mux in i2c0 block, default state */
-	DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"),
-	/* i2c0 sleep state */
-	DB8500_PIN_SLEEP("GPIO147_C15", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SDA */
-	DB8500_PIN_SLEEP("GPIO148_B16", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SCL */
-	/* Mux in i2c1 block, default state  */
-	DB8500_MUX("i2c1_b_2", "i2c1", "nmk-i2c.1"),
-	/* i2c1 sleep state */
-	DB8500_PIN_SLEEP("GPIO16_AD3", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SDA */
-	DB8500_PIN_SLEEP("GPIO17_AD4", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SCL */
-	/* Mux in i2c2 block, default state  */
-	DB8500_MUX("i2c2_b_2", "i2c2", "nmk-i2c.2"),
-	/* i2c2 sleep state */
-	DB8500_PIN_SLEEP("GPIO10_AF5", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SDA */
-	DB8500_PIN_SLEEP("GPIO11_AG4", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SCL */
-	/* Mux in i2c3 block, default state  */
-	DB8500_MUX("i2c3_c_2", "i2c3", "nmk-i2c.3"),
-	/* i2c3 sleep state */
-	DB8500_PIN_SLEEP("GPIO229_AG7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SDA */
-	DB8500_PIN_SLEEP("GPIO230_AF7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SCL */
-	/* Mux in SDI0 (here called MC0) used for removable MMC/SD/SDIO cards */
-	DB8500_MUX("mc0_a_1", "mc0", "sdi0"),
-	DB8500_PIN("GPIO18_AC2", out_hi, "sdi0"), /* CMDDIR */
-	DB8500_PIN("GPIO19_AC1", out_hi, "sdi0"), /* DAT0DIR */
-	DB8500_PIN("GPIO20_AB4", out_hi, "sdi0"), /* DAT2DIR */
-	DB8500_PIN("GPIO22_AA3", in_nopull, "sdi0"), /* FBCLK */
-	DB8500_PIN("GPIO23_AA4", out_lo, "sdi0"), /* CLK */
-	DB8500_PIN("GPIO24_AB2", in_pu, "sdi0"), /* CMD */
-	DB8500_PIN("GPIO25_Y4", in_pu, "sdi0"), /* DAT0 */
-	DB8500_PIN("GPIO26_Y2", in_pu, "sdi0"), /* DAT1 */
-	DB8500_PIN("GPIO27_AA2", in_pu, "sdi0"), /* DAT2 */
-	DB8500_PIN("GPIO28_AA1", in_pu, "sdi0"), /* DAT3 */
-	/* SDI0 sleep state */
-	DB8500_PIN_SLEEP("GPIO18_AC2", slpm_out_hi_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO19_AC1", slpm_out_hi_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO20_AB4", slpm_out_hi_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO22_AA3", slpm_in_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO23_AA4", slpm_out_lo_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO24_AB2", slpm_in_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO25_Y4", slpm_in_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO26_Y2", slpm_in_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO27_AA2", slpm_in_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO28_AA1", slpm_in_wkup_pdis, "sdi0"),
-
-	/* Mux in SDI1 (here called MC1) used for SDIO for CW1200 WLAN */
-	DB8500_MUX("mc1_a_1", "mc1", "sdi1"),
-	DB8500_PIN("GPIO208_AH16", out_lo, "sdi1"), /* CLK */
-	DB8500_PIN("GPIO209_AG15", in_nopull, "sdi1"), /* FBCLK */
-	DB8500_PIN("GPIO210_AJ15", in_pu, "sdi1"), /* CMD */
-	DB8500_PIN("GPIO211_AG14", in_pu, "sdi1"), /* DAT0 */
-	DB8500_PIN("GPIO212_AF13", in_pu, "sdi1"), /* DAT1 */
-	DB8500_PIN("GPIO213_AG13", in_pu, "sdi1"), /* DAT2 */
-	DB8500_PIN("GPIO214_AH15", in_pu, "sdi1"), /* DAT3 */
-	/* SDI1 sleep state */
-	DB8500_PIN_SLEEP("GPIO208_AH16", slpm_out_lo_wkup_pdis, "sdi1"), /* CLK */
-	DB8500_PIN_SLEEP("GPIO209_AG15", slpm_in_wkup_pdis, "sdi1"), /* FBCLK */
-	DB8500_PIN_SLEEP("GPIO210_AJ15", slpm_in_wkup_pdis, "sdi1"), /* CMD */
-	DB8500_PIN_SLEEP("GPIO211_AG14", slpm_in_wkup_pdis, "sdi1"), /* DAT0 */
-	DB8500_PIN_SLEEP("GPIO212_AF13", slpm_in_wkup_pdis, "sdi1"), /* DAT1 */
-	DB8500_PIN_SLEEP("GPIO213_AG13", slpm_in_wkup_pdis, "sdi1"), /* DAT2 */
-	DB8500_PIN_SLEEP("GPIO214_AH15", slpm_in_wkup_pdis, "sdi1"), /* DAT3 */
-
-	/* Mux in SDI2 (here called MC2) used for for PoP eMMC */
-	DB8500_MUX("mc2_a_1", "mc2", "sdi2"),
-	DB8500_PIN("GPIO128_A5", out_lo, "sdi2"), /* CLK */
-	DB8500_PIN("GPIO129_B4", in_pu, "sdi2"), /* CMD */
-	DB8500_PIN("GPIO130_C8", in_nopull, "sdi2"), /* FBCLK */
-	DB8500_PIN("GPIO131_A12", in_pu, "sdi2"), /* DAT0 */
-	DB8500_PIN("GPIO132_C10", in_pu, "sdi2"), /* DAT1 */
-	DB8500_PIN("GPIO133_B10", in_pu, "sdi2"), /* DAT2 */
-	DB8500_PIN("GPIO134_B9", in_pu, "sdi2"), /* DAT3 */
-	DB8500_PIN("GPIO135_A9", in_pu, "sdi2"), /* DAT4 */
-	DB8500_PIN("GPIO136_C7", in_pu, "sdi2"), /* DAT5 */
-	DB8500_PIN("GPIO137_A7", in_pu, "sdi2"), /* DAT6 */
-	DB8500_PIN("GPIO138_C5", in_pu, "sdi2"), /* DAT7 */
-	/* SDI2 sleep state */
-	DB8500_PIN_SLEEP("GPIO128_A5", out_lo_wkup_pdis, "sdi2"), /* CLK */
-	DB8500_PIN_SLEEP("GPIO129_B4", in_wkup_pdis_en, "sdi2"), /* CMD */
-	DB8500_PIN_SLEEP("GPIO130_C8", in_wkup_pdis_en, "sdi2"), /* FBCLK */
-	DB8500_PIN_SLEEP("GPIO131_A12", in_wkup_pdis, "sdi2"), /* DAT0 */
-	DB8500_PIN_SLEEP("GPIO132_C10", in_wkup_pdis, "sdi2"), /* DAT1 */
-	DB8500_PIN_SLEEP("GPIO133_B10", in_wkup_pdis, "sdi2"), /* DAT2 */
-	DB8500_PIN_SLEEP("GPIO134_B9", in_wkup_pdis, "sdi2"), /* DAT3 */
-	DB8500_PIN_SLEEP("GPIO135_A9", in_wkup_pdis, "sdi2"), /* DAT4 */
-	DB8500_PIN_SLEEP("GPIO136_C7", in_wkup_pdis, "sdi2"), /* DAT5 */
-	DB8500_PIN_SLEEP("GPIO137_A7", in_wkup_pdis, "sdi2"), /* DAT6 */
-	DB8500_PIN_SLEEP("GPIO138_C5", in_wkup_pdis, "sdi2"), /* DAT7 */
-
-	/* Mux in SDI4 (here called MC4) used for for PCB-mounted eMMC */
-	DB8500_MUX("mc4_a_1", "mc4", "sdi4"),
-	DB8500_PIN("GPIO197_AH24", in_pu, "sdi4"), /* DAT3 */
-	DB8500_PIN("GPIO198_AG25", in_pu, "sdi4"), /* DAT2 */
-	DB8500_PIN("GPIO199_AH23", in_pu, "sdi4"), /* DAT1 */
-	DB8500_PIN("GPIO200_AH26", in_pu, "sdi4"), /* DAT0 */
-	DB8500_PIN("GPIO201_AF24", in_pu, "sdi4"), /* CMD */
-	DB8500_PIN("GPIO202_AF25", in_nopull, "sdi4"), /* FBCLK */
-	DB8500_PIN("GPIO203_AE23", out_lo, "sdi4"), /* CLK */
-	DB8500_PIN("GPIO204_AF23", in_pu, "sdi4"), /* DAT7 */
-	DB8500_PIN("GPIO205_AG23", in_pu, "sdi4"), /* DAT6 */
-	DB8500_PIN("GPIO206_AG24", in_pu, "sdi4"), /* DAT5 */
-	DB8500_PIN("GPIO207_AJ23", in_pu, "sdi4"), /* DAT4 */
-	/*SDI4 sleep state */
-	DB8500_PIN_SLEEP("GPIO197_AH24", slpm_in_wkup_pdis, "sdi4"), /* DAT3 */
-	DB8500_PIN_SLEEP("GPIO198_AG25", slpm_in_wkup_pdis, "sdi4"), /* DAT2 */
-	DB8500_PIN_SLEEP("GPIO199_AH23", slpm_in_wkup_pdis, "sdi4"), /* DAT1 */
-	DB8500_PIN_SLEEP("GPIO200_AH26", slpm_in_wkup_pdis, "sdi4"), /* DAT0 */
-	DB8500_PIN_SLEEP("GPIO201_AF24", slpm_in_wkup_pdis, "sdi4"), /* CMD */
-	DB8500_PIN_SLEEP("GPIO202_AF25", slpm_in_wkup_pdis, "sdi4"), /* FBCLK */
-	DB8500_PIN_SLEEP("GPIO203_AE23", slpm_out_lo_wkup_pdis, "sdi4"), /* CLK */
-	DB8500_PIN_SLEEP("GPIO204_AF23", slpm_in_wkup_pdis, "sdi4"), /* DAT7 */
-	DB8500_PIN_SLEEP("GPIO205_AG23", slpm_in_wkup_pdis, "sdi4"), /* DAT6 */
-	DB8500_PIN_SLEEP("GPIO206_AG24", slpm_in_wkup_pdis, "sdi4"), /* DAT5 */
-	DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */
-
-	/* Mux in USB pins, drive STP high */
-	/* USB default state */
-	DB8500_MUX("usb_a_1", "usb", "ab8500-usb.0"),
-	DB8500_PIN("GPIO257_AE29", out_hi, "ab8500-usb.0"), /* STP */
-	/* USB sleep state */
-	DB8500_PIN_SLEEP("GPIO256_AF28", slpm_wkup_pdis_en, "ab8500-usb.0"), /* NXT */
-	DB8500_PIN_SLEEP("GPIO257_AE29", slpm_out_hi_wkup_pdis, "ab8500-usb.0"), /* STP */
-	DB8500_PIN_SLEEP("GPIO258_AD29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* XCLK */
-	DB8500_PIN_SLEEP("GPIO259_AC29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* DIR */
-	DB8500_PIN_SLEEP("GPIO260_AD28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT7 */
-	DB8500_PIN_SLEEP("GPIO261_AD26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT6 */
-	DB8500_PIN_SLEEP("GPIO262_AE26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT5 */
-	DB8500_PIN_SLEEP("GPIO263_AG29", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT4 */
-	DB8500_PIN_SLEEP("GPIO264_AE27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT3 */
-	DB8500_PIN_SLEEP("GPIO265_AD27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT2 */
-	DB8500_PIN_SLEEP("GPIO266_AC28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT1 */
-	DB8500_PIN_SLEEP("GPIO267_AC27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT0 */
-
-	/* Mux in SPI2 pins on the "other C1" altfunction */
-	DB8500_MUX("spi2_oc1_2", "spi2", "spi2"),
-	DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */
-	DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */
-	DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */
-	DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */
-	/* SPI2 idle state */
-	DB8500_PIN_IDLE("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
-	DB8500_PIN_IDLE("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
-	DB8500_PIN_IDLE("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
-	/* SPI2 sleep state */
-	DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */
-	DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
-	DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
-	DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
-
-	/* ske default state */
-	DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"),
-	DB8500_PIN("GPIO153_B17", in_pd, "nmk-ske-keypad"), /* I7 */
-	DB8500_PIN("GPIO154_C16", in_pd, "nmk-ske-keypad"), /* I6 */
-	DB8500_PIN("GPIO155_C19", in_pd, "nmk-ske-keypad"), /* I5 */
-	DB8500_PIN("GPIO156_C17", in_pd, "nmk-ske-keypad"), /* I4 */
-	DB8500_PIN("GPIO161_D21", in_pd, "nmk-ske-keypad"), /* I3 */
-	DB8500_PIN("GPIO162_D20", in_pd, "nmk-ske-keypad"), /* I2 */
-	DB8500_PIN("GPIO163_C20", in_pd, "nmk-ske-keypad"), /* I1 */
-	DB8500_PIN("GPIO164_B21", in_pd, "nmk-ske-keypad"), /* I0 */
-	DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */
-	DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */
-	DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */
-	DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */
-	DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */
-	DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */
-	DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */
-	DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */
-	/* ske sleep state */
-	DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */
-	DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */
-	DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */
-	DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */
-	DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */
-	DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */
-	DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */
-	DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */
-	DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */
-	DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */
-	DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */
-	DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */
-	DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */
-	DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */
-	DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */
-	DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */
-
-	/* STM APE pins states */
-	DB8500_MUX_STATE("stmape_c_1", "stmape",
-		"stm", "ape_mipi34"),
-	DB8500_PIN_STATE("GPIO70_G5", in_nopull,
-		"stm", "ape_mipi34"), /* clk */
-	DB8500_PIN_STATE("GPIO71_G4", in_nopull,
-		"stm", "ape_mipi34"), /* dat3 */
-	DB8500_PIN_STATE("GPIO72_H4", in_nopull,
-		"stm", "ape_mipi34"), /* dat2 */
-	DB8500_PIN_STATE("GPIO73_H3", in_nopull,
-		"stm", "ape_mipi34"), /* dat1 */
-	DB8500_PIN_STATE("GPIO74_J3", in_nopull,
-		"stm", "ape_mipi34"), /* dat0 */
-
-	DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
-		"stm", "ape_mipi34_sleep"), /* clk */
-	DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
-		"stm", "ape_mipi34_sleep"), /* dat3 */
-	DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
-		"stm", "ape_mipi34_sleep"), /* dat2 */
-	DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
-		"stm", "ape_mipi34_sleep"), /* dat1 */
-	DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
-		"stm", "ape_mipi34_sleep"), /* dat0 */
-
-	DB8500_MUX_STATE("stmape_oc1_1", "stmape",
-		"stm", "ape_microsd"),
-	DB8500_PIN_STATE("GPIO23_AA4", in_nopull,
-		"stm", "ape_microsd"), /* clk */
-	DB8500_PIN_STATE("GPIO25_Y4", in_nopull,
-		"stm", "ape_microsd"), /* dat0 */
-	DB8500_PIN_STATE("GPIO26_Y2", in_nopull,
-		"stm", "ape_microsd"), /* dat1 */
-	DB8500_PIN_STATE("GPIO27_AA2", in_nopull,
-		"stm", "ape_microsd"), /* dat2 */
-	DB8500_PIN_STATE("GPIO28_AA1", in_nopull,
-		"stm", "ape_microsd"), /* dat3 */
-
-	DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis,
-		"stm", "ape_microsd_sleep"), /* clk */
-	DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis,
-		"stm", "ape_microsd_sleep"), /* dat0 */
-	DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis,
-		"stm", "ape_microsd_sleep"), /* dat1 */
-	DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis,
-		"stm", "ape_microsd_sleep"), /* dat2 */
-	DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis,
-		"stm", "ape_microsd_sleep"), /* dat3 */
-
-	/*  STM Modem pins states */
-	DB8500_MUX_STATE("stmmod_oc3_2", "stmmod",
-		"stm", "mod_mipi34"),
-	DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
-		"stm", "mod_mipi34"),
-	DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
-		"stm", "mod_mipi34"),
-	DB8500_PIN_STATE("GPIO70_G5", in_nopull,
-		"stm", "mod_mipi34"), /* clk */
-	DB8500_PIN_STATE("GPIO71_G4", in_nopull,
-		"stm", "mod_mipi34"), /* dat3 */
-	DB8500_PIN_STATE("GPIO72_H4", in_nopull,
-		"stm", "mod_mipi34"), /* dat2 */
-	DB8500_PIN_STATE("GPIO73_H3", in_nopull,
-		"stm", "mod_mipi34"), /* dat1 */
-	DB8500_PIN_STATE("GPIO74_J3", in_nopull,
-		"stm", "mod_mipi34"), /* dat0 */
-	DB8500_PIN_STATE("GPIO75_H2", in_pu,
-		"stm", "mod_mipi34"), /* uartmod rx */
-	DB8500_PIN_STATE("GPIO76_J2", out_lo,
-		"stm", "mod_mipi34"), /* uartmod tx */
-
-	DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_sleep"), /* clk */
-	DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_sleep"), /* dat3 */
-	DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_sleep"), /* dat2 */
-	DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_sleep"), /* dat1 */
-	DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_sleep"), /* dat0 */
-	DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
-		"stm", "mod_mipi34_sleep"), /* uartmod rx */
-	DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
-		"stm", "mod_mipi34_sleep"), /* uartmod tx */
-
-	DB8500_MUX_STATE("stmmod_b_1", "stmmod",
-		"stm", "mod_microsd"),
-	DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
-		"stm", "mod_microsd"),
-	DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
-		"stm", "mod_microsd"),
-	DB8500_PIN_STATE("GPIO23_AA4", in_nopull,
-		"stm", "mod_microsd"), /* clk */
-	DB8500_PIN_STATE("GPIO25_Y4", in_nopull,
-		"stm", "mod_microsd"), /* dat0 */
-	DB8500_PIN_STATE("GPIO26_Y2", in_nopull,
-		"stm", "mod_microsd"), /* dat1 */
-	DB8500_PIN_STATE("GPIO27_AA2", in_nopull,
-		"stm", "mod_microsd"), /* dat2 */
-	DB8500_PIN_STATE("GPIO28_AA1", in_nopull,
-		"stm", "mod_microsd"), /* dat3 */
-	DB8500_PIN_STATE("GPIO75_H2", in_pu,
-		"stm", "mod_microsd"), /* uartmod rx */
-	DB8500_PIN_STATE("GPIO76_J2", out_lo,
-		"stm", "mod_microsd"), /* uartmod tx */
-
-	DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis,
-		"stm", "mod_microsd_sleep"), /* clk */
-	DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis,
-		"stm", "mod_microsd_sleep"), /* dat0 */
-	DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis,
-		"stm", "mod_microsd_sleep"), /* dat1 */
-	DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis,
-		"stm", "mod_microsd_sleep"), /* dat2 */
-	DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis,
-		"stm", "mod_microsd_sleep"), /* dat3 */
-	DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
-		"stm", "mod_microsd_sleep"), /* uartmod rx */
-	DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
-		"stm", "mod_microsd_sleep"), /* uartmod tx */
-
-	/*  STM dual Modem/APE pins state */
-	DB8500_MUX_STATE("stmmod_oc3_2", "stmmod",
-		"stm", "mod_mipi34_ape_mipi60"),
-	DB8500_MUX_STATE("stmape_c_2", "stmape",
-		"stm", "mod_mipi34_ape_mipi60"),
-	DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
-		"stm", "mod_mipi34_ape_mipi60"),
-	DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
-		"stm", "mod_mipi34_ape_mipi60"),
-	DB8500_PIN_STATE("GPIO70_G5", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* clk */
-	DB8500_PIN_STATE("GPIO71_G4", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat3 */
-	DB8500_PIN_STATE("GPIO72_H4", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat2 */
-	DB8500_PIN_STATE("GPIO73_H3", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat1 */
-	DB8500_PIN_STATE("GPIO74_J3", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat0 */
-	DB8500_PIN_STATE("GPIO75_H2", in_pu,
-		"stm", "mod_mipi34_ape_mipi60"), /* uartmod rx */
-	DB8500_PIN_STATE("GPIO76_J2", out_lo,
-		"stm", "mod_mipi34_ape_mipi60"), /* uartmod tx */
-	DB8500_PIN_STATE("GPIO155_C19", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* clk */
-	DB8500_PIN_STATE("GPIO156_C17", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat3 */
-	DB8500_PIN_STATE("GPIO157_A18", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat2 */
-	DB8500_PIN_STATE("GPIO158_C18", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat1 */
-	DB8500_PIN_STATE("GPIO159_B19", in_nopull,
-		"stm", "mod_mipi34_ape_mipi60"), /* dat0 */
-
-	DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */
-	DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */
-	DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */
-	DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */
-	DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */
-	DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod rx */
-	DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod tx */
-	DB8500_PIN_STATE("GPIO155_C19", slpm_in_wkup_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */
-	DB8500_PIN_STATE("GPIO156_C17", slpm_in_wkup_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */
-	DB8500_PIN_STATE("GPIO157_A18", slpm_in_wkup_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */
-	DB8500_PIN_STATE("GPIO158_C18", slpm_in_wkup_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */
-	DB8500_PIN_STATE("GPIO159_B19", slpm_in_wkup_pdis,
-		"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */
-};
-
-/*
- * These are specifically for the MOP500 and HREFP (pre-v60) version of the
- * board, which utilized a TC35892 GPIO expander instead of using a lot of
- * on-chip pins as the HREFv60 and later does.
- */
-static struct pinctrl_map __initdata mop500_pinmap[] = {
-	/* Mux in SSP0, pull down RXD pin */
-	DB8500_MUX_HOG("ssp0_a_1", "ssp0"),
-	DB8500_PIN_HOG("GPIO145_C13", pd),
-	/*
-	 * XENON Flashgun on image processor GPIO (controlled from image
-	 * processor firmware), mux in these image processor GPIO lines 0
-	 * (XENON_FLASH_ID) and 1 (XENON_READY) on altfunction C and pull up
-	 * the pins.
-	 */
-	DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"),
-	DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"),
-	DB8500_PIN_HOG("GPIO6_AF6", in_pu),
-	DB8500_PIN_HOG("GPIO7_AG5", in_pu),
-	/* TC35892 IRQ, pull up the line, let the driver mux in the pin */
-	DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu),
-	/* Mux in UART1 and set the pull-ups */
-	DB8500_MUX_HOG("u1rxtx_a_1", "u1"),
-	DB8500_PIN_HOG("GPIO4_AH6", in_pu), /* RXD */
-	DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* TXD */
-	/*
-	 * Runtime stuff: make it possible to mux in the SKE keypad
-	 * and bias the pins
-	 */
-	/* ske default state */
-	DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"),
-	DB8500_PIN("GPIO153_B17", in_pu, "nmk-ske-keypad"), /* I7 */
-	DB8500_PIN("GPIO154_C16", in_pu, "nmk-ske-keypad"), /* I6 */
-	DB8500_PIN("GPIO155_C19", in_pu, "nmk-ske-keypad"), /* I5 */
-	DB8500_PIN("GPIO156_C17", in_pu, "nmk-ske-keypad"), /* I4 */
-	DB8500_PIN("GPIO161_D21", in_pu, "nmk-ske-keypad"), /* I3 */
-	DB8500_PIN("GPIO162_D20", in_pu, "nmk-ske-keypad"), /* I2 */
-	DB8500_PIN("GPIO163_C20", in_pu, "nmk-ske-keypad"), /* I1 */
-	DB8500_PIN("GPIO164_B21", in_pu, "nmk-ske-keypad"), /* I0 */
-	DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */
-	DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */
-	DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */
-	DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */
-	DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */
-	DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */
-	DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */
-	DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */
-	/* ske sleep state */
-	DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */
-	DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */
-	DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */
-	DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */
-	DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */
-	DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */
-	DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */
-	DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */
-	DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */
-	DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */
-	DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */
-	DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */
-	DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */
-	DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */
-	DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */
-	DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */
-
-	/* Mux in and drive the SDI0 DAT31DIR line high at runtime */
-	DB8500_MUX("mc0dat31dir_a_1", "mc0", "sdi0"),
-	DB8500_PIN("GPIO21_AB3", out_hi, "sdi0"),
-};
-
-/*
- * The HREFv60 series of platforms is using available pins on the DB8500
- * insteaf of the Toshiba I2C GPIO expander, reusing some pins like the SSP0
- * and SSP1 ports (previously connected to the AB8500) as generic GPIO lines.
- */
-static struct pinctrl_map __initdata hrefv60_pinmap[] = {
-	/* Drive WLAN_ENA low */
-	DB8500_PIN_HOG("GPIO85_D5", gpio_out_lo), /* WLAN_ENA */
-	/*
-	 * XENON Flashgun on image processor GPIO (controlled from image
-	 * processor firmware), mux in these image processor GPIO lines 0
-	 * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant
-	 * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias
-	 * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output.
-	 */
-	DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"),
-	DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"),
-	DB8500_MUX_HOG("ipgpio4_c_1", "ipgpio"),
-	DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* XENON_FLASH_ID */
-	DB8500_PIN_HOG("GPIO7_AG5", in_pu), /* XENON_READY */
-	DB8500_PIN_HOG("GPIO21_AB3", gpio_out_lo), /* XENON_EN1 */
-	DB8500_PIN_HOG("GPIO64_F3", out_lo), /* XENON_EN2 */
-	/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
-	DB8500_PIN_HOG("GPIO31_V3", gpio_in_pu), /* EN1 */
-	DB8500_PIN_HOG("GPIO32_V2", gpio_in_pd), /* DRDY */
-	/*
-	 * Display Interface 1 uses GPIO 65 for RST (reset).
-	 * Display Interface 2 uses GPIO 66 for RST (reset).
-	 * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
-	 */
-	DB8500_PIN_HOG("GPIO65_F1", gpio_out_hi), /* DISP1 NO RST */
-	DB8500_PIN_HOG("GPIO66_G3", gpio_out_lo), /* DISP2 RST */
-	/*
-	 * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
-	 * GPIO 67 for interrupts. Pull-up the IRQ line and drive both
-	 * reset signals low.
-	 */
-	DB8500_PIN_HOG("GPIO143_D12", gpio_out_lo), /* TOUCH_RST1 */
-	DB8500_PIN_HOG("GPIO67_G2", gpio_in_pu), /* TOUCH_INT2 */
-	DB8500_PIN_HOG("GPIO146_D13", gpio_out_lo), /* TOUCH_RST2 */
-	/*
-	 * Drive D19-D23 for the ETM PTM trace interface low,
-	 * (presumably pins are unconnected therefore grounded here,
-	 * the "other alt C1" setting enables these pins)
-	 */
-	DB8500_PIN_HOG("GPIO70_G5", gpio_out_lo),
-	DB8500_PIN_HOG("GPIO71_G4", gpio_out_lo),
-	DB8500_PIN_HOG("GPIO72_H4", gpio_out_lo),
-	DB8500_PIN_HOG("GPIO73_H3", gpio_out_lo),
-	DB8500_PIN_HOG("GPIO74_J3", gpio_out_lo),
-	/* NAHJ CTRL on GPIO 76 to low, CTRL_INV on GPIO216 to high */
-	DB8500_PIN_HOG("GPIO76_J2", gpio_out_lo), /* CTRL */
-	DB8500_PIN_HOG("GPIO216_AG12", gpio_out_hi), /* CTRL_INV */
-	/* NFC ENA and RESET to low, pulldown IRQ line */
-	DB8500_PIN_HOG("GPIO77_H1", gpio_out_lo), /* NFC_ENA */
-	DB8500_PIN_HOG("GPIO144_B13", gpio_in_pd), /* NFC_IRQ */
-	DB8500_PIN_HOG("GPIO142_C11", gpio_out_lo), /* NFC_RESET */
-	/*
-	 * SKE keyboard partly on alt A and partly on "Other alt C1"
-	 * Driver KP_O1,2,3,6,7 low and pull up KP_I 0,2,3 for three
-	 * rows of 6 keys, then pull up force sensing interrup and
-	 * drive reset and force sensing WU low.
-	 */
-	DB8500_MUX_HOG("kp_a_1", "kp"),
-	DB8500_MUX_HOG("kp_oc1_1", "kp"),
-	DB8500_PIN_HOG("GPIO90_A3", out_lo), /* KP_O1 */
-	DB8500_PIN_HOG("GPIO87_B3", out_lo), /* KP_O2 */
-	DB8500_PIN_HOG("GPIO86_C6", out_lo), /* KP_O3 */
-	DB8500_PIN_HOG("GPIO96_D8", out_lo), /* KP_O6 */
-	DB8500_PIN_HOG("GPIO94_D7", out_lo), /* KP_O7 */
-	DB8500_PIN_HOG("GPIO93_B7", in_pu), /* KP_I0 */
-	DB8500_PIN_HOG("GPIO89_E6", in_pu), /* KP_I2 */
-	DB8500_PIN_HOG("GPIO88_C4", in_pu), /* KP_I3 */
-	DB8500_PIN_HOG("GPIO91_B6", gpio_in_pu), /* FORCE_SENSING_INT */
-	DB8500_PIN_HOG("GPIO92_D6", gpio_out_lo), /* FORCE_SENSING_RST */
-	DB8500_PIN_HOG("GPIO97_D9", gpio_out_lo), /* FORCE_SENSING_WU */
-	/* DiPro Sensor interrupt */
-	DB8500_PIN_HOG("GPIO139_C9", gpio_in_pu), /* DIPRO_INT */
-	/* Audio Amplifier HF enable */
-	DB8500_PIN_HOG("GPIO149_B14", gpio_out_hi), /* VAUDIO_HF_EN, enable MAX8968 */
-	/* GBF interface, pull low to reset state */
-	DB8500_PIN_HOG("GPIO171_D23", gpio_out_lo), /* GBF_ENA_RESET */
-	/* MSP : HDTV INTERFACE GPIO line */
-	DB8500_PIN_HOG("GPIO192_AJ27", gpio_in_pd),
-	/* Accelerometer interrupt lines */
-	DB8500_PIN_HOG("GPIO82_C1", gpio_in_pu), /* ACC_INT1 */
-	DB8500_PIN_HOG("GPIO83_D3", gpio_in_pu), /* ACC_INT2 */
-	/* SD card detect GPIO pin */
-	DB8500_PIN_HOG("GPIO95_E8", gpio_in_pu),
-	/*
-	 * Runtime stuff
-	 * Pull up/down of some sensor GPIO pins, for proximity, HAL sensor
-	 * etc.
-	 */
-	DB8500_PIN("GPIO217_AH12", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"),
-	DB8500_PIN("GPIO145_C13", gpio_in_pd_slpm_gpio_nopull, "gpio-keys.0"),
-	DB8500_PIN("GPIO139_C9", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"),
-};
-
-static struct pinctrl_map __initdata u9500_pinmap[] = {
-	/* Mux in UART1 (just RX/TX) and set the pull-ups */
-	DB8500_MUX_HOG("u1rxtx_a_1", "u1"),
-	DB8500_PIN_HOG("GPIO4_AH6", in_pu),
-	DB8500_PIN_HOG("GPIO5_AG6", out_hi),
-	/* WLAN_IRQ line */
-	DB8500_PIN_HOG("GPIO144_B13", gpio_in_pu),
-	/* HSI */
-	DB8500_MUX_HOG("hsir_a_1", "hsi"),
-	DB8500_MUX_HOG("hsit_a_2", "hsi"),
-	DB8500_PIN_HOG("GPIO219_AG10", in_pd), /* RX FLA0 */
-	DB8500_PIN_HOG("GPIO220_AH10", in_pd), /* RX DAT0 */
-	DB8500_PIN_HOG("GPIO221_AJ11", out_lo), /* RX RDY0 */
-	DB8500_PIN_HOG("GPIO222_AJ9", out_lo), /* TX FLA0 */
-	DB8500_PIN_HOG("GPIO223_AH9", out_lo), /* TX DAT0 */
-	DB8500_PIN_HOG("GPIO224_AG9", in_pd), /* TX RDY0 */
-	DB8500_PIN_HOG("GPIO225_AG8", in_pd), /* CAWAKE0 */
-	DB8500_PIN_HOG("GPIO226_AF8", gpio_out_hi), /* ACWAKE0 */
-};
-
-static struct pinctrl_map __initdata u8500_pinmap[] = {
-	DB8500_PIN_HOG("GPIO226_AF8", gpio_out_lo), /* WLAN_PMU_EN */
-	DB8500_PIN_HOG("GPIO4_AH6", gpio_in_pu), /* WLAN_IRQ */
-};
-
-static struct pinctrl_map __initdata snowball_pinmap[] = {
-	/* Mux in SSP0 connected to AB8500, pull down RXD pin */
-	DB8500_MUX_HOG("ssp0_a_1", "ssp0"),
-	DB8500_PIN_HOG("GPIO145_C13", pd),
-	/* Always drive the MC0 DAT31DIR line high on these boards */
-	DB8500_PIN_HOG("GPIO21_AB3", out_hi),
-	/* Mux in "SM" which is used for the SMSC911x Ethernet adapter */
-	DB8500_MUX_HOG("sm_b_1", "sm"),
-	/* User LED */
-	DB8500_PIN_HOG("GPIO142_C11", gpio_out_hi),
-	/* Drive RSTn_LAN high */
-	DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi),
-	/*  Accelerometer/Magnetometer */
-	DB8500_PIN_HOG("GPIO163_C20", gpio_in_pu), /* ACCEL_IRQ1 */
-	DB8500_PIN_HOG("GPIO164_B21", gpio_in_pu), /* ACCEL_IRQ2 */
-	DB8500_PIN_HOG("GPIO165_C21", gpio_in_pu), /* MAG_DRDY */
-	/* WLAN/GBF */
-	DB8500_PIN_HOG("GPIO161_D21", gpio_out_lo), /* WLAN_PMU_EN */
-	DB8500_PIN_HOG("GPIO171_D23", gpio_out_hi), /* GBF_ENA */
-	DB8500_PIN_HOG("GPIO215_AH13", gpio_out_lo), /* WLAN_ENA */
-	DB8500_PIN_HOG("GPIO216_AG12", gpio_in_pu), /* WLAN_IRQ */
-};
-
-/*
- * passing "pinsfor=" in kernel cmdline allows for custom
- * configuration of GPIOs on u8500 derived boards.
- */
-static int __init early_pinsfor(char *p)
-{
-	pinsfor = PINS_FOR_DEFAULT;
-
-	if (strcmp(p, "u9500-21") == 0)
-		pinsfor = PINS_FOR_U9500;
-
-	return 0;
-}
-early_param("pinsfor", early_pinsfor);
-
-int pins_for_u9500(void)
-{
-	if (pinsfor == PINS_FOR_U9500)
-		return 1;
-
-	return 0;
-}
-
-static void __init mop500_href_family_pinmaps_init(void)
-{
-	switch (pinsfor) {
-	case PINS_FOR_U9500:
-		pinctrl_register_mappings(u9500_pinmap,
-					  ARRAY_SIZE(u9500_pinmap));
-		break;
-	case PINS_FOR_DEFAULT:
-		pinctrl_register_mappings(u8500_pinmap,
-					  ARRAY_SIZE(u8500_pinmap));
-	default:
-		break;
-	}
-}
-
 void __init mop500_pinmaps_init(void)
 {
-	pinctrl_register_mappings(mop500_family_pinmap,
-				  ARRAY_SIZE(mop500_family_pinmap));
-	pinctrl_register_mappings(mop500_pinmap,
-				  ARRAY_SIZE(mop500_pinmap));
-	mop500_href_family_pinmaps_init();
 	if (machine_is_u8520())
 		pinctrl_register_mappings(ab8505_pinmap,
 					  ARRAY_SIZE(ab8505_pinmap));
@@ -1073,23 +280,12 @@ void __init mop500_pinmaps_init(void)
 
 void __init snowball_pinmaps_init(void)
 {
-	pinctrl_register_mappings(mop500_family_pinmap,
-				  ARRAY_SIZE(mop500_family_pinmap));
-	pinctrl_register_mappings(snowball_pinmap,
-				  ARRAY_SIZE(snowball_pinmap));
-	pinctrl_register_mappings(u8500_pinmap,
-				  ARRAY_SIZE(u8500_pinmap));
 	pinctrl_register_mappings(ab8500_pinmap,
 				  ARRAY_SIZE(ab8500_pinmap));
 }
 
 void __init hrefv60_pinmaps_init(void)
 {
-	pinctrl_register_mappings(mop500_family_pinmap,
-				  ARRAY_SIZE(mop500_family_pinmap));
-	pinctrl_register_mappings(hrefv60_pinmap,
-				  ARRAY_SIZE(hrefv60_pinmap));
-	mop500_href_family_pinmaps_init();
 	pinctrl_register_mappings(ab8500_pinmap,
 				  ARRAY_SIZE(ab8500_pinmap));
 }
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 0dc44c683427..a4e139aa2441 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -30,20 +30,6 @@ struct regulator_init_data gpio_en_3v3_regulator = {
        .consumer_supplies = gpio_en_3v3_consumers,
 };
 
-static struct regulator_consumer_supply sdi0_reg_consumers[] = {
-        REGULATOR_SUPPLY("vqmmc", "sdi0"),
-};
-
-struct regulator_init_data sdi0_reg_init_data = {
-        .constraints = {
-                .min_uV         = 1800000,
-                .max_uV         = 2900000,
-                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|REGULATOR_CHANGE_STATUS,
-        },
-        .num_consumer_supplies  = ARRAY_SIZE(sdi0_reg_consumers),
-        .consumer_supplies      = sdi0_reg_consumers,
-};
-
 /*
  * TPS61052 regulator
  */
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
index 039f5132c370..9bece38fe933 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.h
+++ b/arch/arm/mach-ux500/board-mop500-regulators.h
@@ -18,7 +18,6 @@ extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data;
 extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data;
 extern struct regulator_init_data tps61052_regulator;
 extern struct regulator_init_data gpio_en_3v3_regulator;
-extern struct regulator_init_data sdi0_reg_init_data;
 
 void mop500_regulator_init(void);
 
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 26600a1c5319..fcbf3a13a539 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -14,10 +14,8 @@
 #include <linux/platform_data/dma-ste-dma40.h>
 
 #include <asm/mach-types.h>
-#include "devices.h"
 
 #include "db8500-regs.h"
-#include "devices-db8500.h"
 #include "board-mop500.h"
 #include "ste-dma40-db8500.h"
 
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
deleted file mode 100644
index 514d40b625a4..000000000000
--- a/arch/arm/mach-ux500/board-mop500.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2008-2012 ST-Ericsson
- *
- * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_data/db8500_thermal.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl022.h>
-#include <linux/mfd/abx500/ab8500.h>
-#include <linux/regulator/ab8500.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/driver.h>
-#include <linux/mfd/tps6105x.h>
-#include <linux/platform_data/leds-lp55xx.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/pinctrl/consumer.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include <asm/mach-types.h>
-
-#include "setup.h"
-#include "devices.h"
-#include "irqs.h"
-
-#include "ste-dma40-db8500.h"
-#include "db8500-regs.h"
-#include "devices-db8500.h"
-#include "board-mop500.h"
-#include "board-mop500-regulators.h"
-
-struct ab8500_platform_data ab8500_platdata = {
-	.irq_base	= MOP500_AB8500_IRQ_BASE,
-	.regulator	= &ab8500_regulator_plat_data,
-};
-
-#ifdef CONFIG_STE_DMA40
-static struct stedma40_chan_cfg ssp0_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV8_SSP0,
-};
-
-static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV8_SSP0,
-};
-#endif
-
-struct pl022_ssp_controller ssp0_plat = {
-	.bus_id = 0,
-#ifdef CONFIG_STE_DMA40
-	.enable_dma = 1,
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &ssp0_dma_cfg_rx,
-	.dma_tx_param = &ssp0_dma_cfg_tx,
-#else
-	.enable_dma = 0,
-#endif
-	/* on this platform, gpio 31,142,144,214 &
-	 * 224 are connected as chip selects
-	 */
-	.num_chipselect = 5,
-};
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 511d6febbe99..d48e8662c676 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -87,7 +87,6 @@ extern struct msp_i2s_platform_data msp0_platform_data;
 extern struct msp_i2s_platform_data msp1_platform_data;
 extern struct msp_i2s_platform_data msp2_platform_data;
 extern struct msp_i2s_platform_data msp3_platform_data;
-extern struct pl022_ssp_controller ssp0_plat;
 
 void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 12c7e5c03ea4..bc8a6183560d 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -21,21 +21,32 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/regulator/machine.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
 #include <linux/random.h>
 
 #include <asm/pmu.h>
 #include <asm/mach/map.h>
 
 #include "setup.h"
-#include "devices.h"
 #include "irqs.h"
 
-#include "devices-db8500.h"
-#include "db8500-regs.h"
+#include "board-mop500-regulators.h"
 #include "board-mop500.h"
+#include "db8500-regs.h"
 #include "id.h"
 
+struct ab8500_platform_data ab8500_platdata = {
+	.irq_base	= MOP500_AB8500_IRQ_BASE,
+	.regulator	= &ab8500_regulator_plat_data,
+};
+
+struct prcmu_pdata db8500_prcmu_pdata = {
+	.ab_platdata	= &ab8500_platdata,
+	.ab_irq		= IRQ_DB8500_AB8500,
+	.irq_base	= IRQ_PRCMU_BASE,
+	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
+	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
+};
+
 /* minimum static i/o mapping required to boot U8500 platforms */
 static struct map_desc u8500_uart_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
@@ -159,17 +170,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
 	OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
 			NULL),
-	/* Requires device name bindings. */
-	OF_DEV_AUXDATA("stericsson,db8500-pinctrl", U8500_PRCMU_BASE,
-		"pinctrl-db8500", NULL),
 	{},
 };
 
 static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = {
-	/* Requires DMA bindings. */
-	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL),
-	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
-	OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
 	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
 			&db8500_prcmu_pdata),
 	{},
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index f84d4397896b..d11ac4bf336c 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -25,7 +25,6 @@
 #include <asm/mach/map.h>
 
 #include "setup.h"
-#include "devices.h"
 
 #include "board-mop500.h"
 #include "db8500-regs.h"
@@ -64,12 +63,7 @@ void __init ux500_init_irq(void)
 	} else
 		ux500_unknown_soc();
 
-#ifdef CONFIG_OF
-	if (of_have_populated_dt())
-		irqchip_init();
-	else
-#endif
-		gic_init(0, 29, dist_base, cpu_base);
+	irqchip_init();
 
 	/*
 	 * Init clocks here so that they are available for system timer
@@ -79,16 +73,11 @@ void __init ux500_init_irq(void)
 		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
 		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
 
-		if (of_have_populated_dt())
-			u8500_of_clk_init(U8500_CLKRST1_BASE,
-					  U8500_CLKRST2_BASE,
-					  U8500_CLKRST3_BASE,
-					  U8500_CLKRST5_BASE,
-					  U8500_CLKRST6_BASE);
-		else
-			u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
-				       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
-				       U8500_CLKRST6_BASE);
+		u8500_of_clk_init(U8500_CLKRST1_BASE,
+				  U8500_CLKRST2_BASE,
+				  U8500_CLKRST3_BASE,
+				  U8500_CLKRST5_BASE,
+				  U8500_CLKRST6_BASE);
 	} else if (cpu_is_u9540()) {
 		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
 		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
deleted file mode 100644
index c59f89d058ff..000000000000
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl022.h>
-#include <linux/mfd/dbx500-prcmu.h>
-
-#include "setup.h"
-#include "irqs.h"
-
-#include "db8500-regs.h"
-#include "devices-db8500.h"
-
-struct prcmu_pdata db8500_prcmu_pdata = {
-	.ab_platdata	= &ab8500_platdata,
-	.ab_irq		= IRQ_DB8500_AB8500,
-	.irq_base	= IRQ_PRCMU_BASE,
-	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
-	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
-};
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
deleted file mode 100644
index b8ffc9979bb2..000000000000
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __DEVICES_DB8500_H
-#define __DEVICES_DB8500_H
-
-#include "irqs.h"
-#include "db8500-regs.h"
-
-struct platform_device;
-
-extern struct ab8500_platform_data ab8500_platdata;
-extern struct prcmu_pdata db8500_prcmu_pdata;
-
-#endif
diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c
deleted file mode 100644
index 0f9e52b95935..000000000000
--- a/arch/arm/mach-ux500/devices.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/amba/bus.h>
-
-#include "setup.h"
-
-#include "db8500-regs.h"
-
-void __init amba_add_devices(struct amba_device *devs[], int num)
-{
-	int i;
-
-	for (i = 0; i < num; i++) {
-		struct amba_device *d = devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
diff --git a/arch/arm/mach-ux500/devices.h b/arch/arm/mach-ux500/devices.h
deleted file mode 100644
index 5bca7c605cd6..000000000000
--- a/arch/arm/mach-ux500/devices.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __ASM_ARCH_DEVICES_H__
-#define __ASM_ARCH_DEVICES_H__
-
-struct platform_device;
-struct amba_device;
-
-extern struct amba_device ux500_pl031_device;
-
-#endif
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index b1dd8584bed4..2dea8b59d222 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -19,17 +19,11 @@
 void ux500_restart(enum reboot_mode mode, const char *cmd);
 
 void __init ux500_map_io(void);
-extern void __init u8500_map_io(void);
-
-extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
 
 extern struct device *ux500_soc_device_init(const char *soc_id);
 
-struct amba_device;
-extern void __init amba_add_devices(struct amba_device *devs[], int num);
-
 extern void ux500_timer_init(void);
 
 #define __IO_DEV_DESC(x, sz)	{		\
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 05a4ff78b3bd..87efda0aa348 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -10,40 +10,12 @@
 #include <linux/clocksource.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/platform_data/clocksource-nomadik-mtu.h>
-
-#include <asm/smp_twd.h>
 
 #include "setup.h"
-#include "irqs.h"
 
 #include "db8500-regs.h"
 #include "id.h"
 
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer,
-			      U8500_TWD_BASE, IRQ_LOCALTIMER);
-
-static void __init ux500_twd_init(void)
-{
-	struct twd_local_timer *twd_local_timer;
-	int err;
-
-	/* Use this to switch local timer base if changed in new ASICs */
-	twd_local_timer = &u8500_twd_local_timer;
-
-	if (of_have_populated_dt())
-		clocksource_of_init();
-	else {
-		err = twd_local_timer_register(twd_local_timer);
-		if (err)
-			pr_err("twd_local_timer_register failed %d\n", err);
-	}
-}
-#else
-#define ux500_twd_init()	do { } while(0)
-#endif
-
 const static struct of_device_id prcmu_timer_of_match[] __initconst = {
 	{ .compatible = "stericsson,db8500-prcmu-timer-4", },
 	{ },
@@ -51,54 +23,26 @@ const static struct of_device_id prcmu_timer_of_match[] __initconst = {
 
 void __init ux500_timer_init(void)
 {
-	void __iomem *mtu_timer_base;
 	void __iomem *prcmu_timer_base;
 	void __iomem *tmp_base;
 	struct device_node *np;
 
-	if (cpu_is_u8500_family() || cpu_is_ux540_family()) {
-		mtu_timer_base = __io_address(U8500_MTU0_BASE);
+	if (cpu_is_u8500_family() || cpu_is_ux540_family())
 		prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
-	} else {
+	else
 		ux500_unknown_soc();
-	}
 
-	/* TODO: Once MTU has been DT:ed place code above into else. */
-	if (of_have_populated_dt()) {
-#ifdef CONFIG_OF
-		np = of_find_matching_node(NULL, prcmu_timer_of_match);
-		if (!np)
-#endif
-			goto dt_fail;
+	np = of_find_matching_node(NULL, prcmu_timer_of_match);
+	if (!np)
+		goto dt_fail;
 
-		tmp_base = of_iomap(np, 0);
-		if (!tmp_base)
-			goto dt_fail;
+	tmp_base = of_iomap(np, 0);
+	if (!tmp_base)
+		goto dt_fail;
 
-		prcmu_timer_base = tmp_base;
-	}
+	prcmu_timer_base = tmp_base;
 
 dt_fail:
-	/* Doing it the old fashioned way. */
-
-	/*
-	 * Here we register the timerblocks active in the system.
-	 * Localtimers (twd) is started when both cpu is up and running.
-	 * MTU register a clocksource, clockevent and sched_clock.
-	 * Since the MTU is located in the VAPE power domain
-	 * it will be cleared in sleep which makes it unsuitable.
-	 * We however need it as a timer tick (clockevent)
-	 * during boot to calibrate delay until twd is started.
-	 * RTC-RTT have problems as timer tick during boot since it is
-	 * depending on delay which is not yet calibrated. RTC-RTT is in the
-	 * always-on powerdomain and is used as clockevent instead of twd when
-	 * sleeping.
-	 * The PRCMU timer 4 register a clocksource and
-	 * sched_clock with higher rating then MTU since is always-on.
-	 *
-	 */
-	if (!of_have_populated_dt())
-		nmdk_timer_init(mtu_timer_base, IRQ_MTU0);
 	clksrc_dbx500_prcmu_init(prcmu_timer_base);
-	ux500_twd_init();
+	clocksource_of_init();
 }