aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorManish Chopra <manishc@marvell.com>2022-03-16 14:46:13 -0700
committerJakub Kicinski <kuba@kernel.org>2022-03-17 09:30:04 -0700
commit424e7834e293936a54fcf05173f2884171adc5a3 (patch)
tree206194be48d10f2599b967f5f1abb70ed1d99700
parentf1858c277ba40172005b76a31e6bb931bfc19d9c (diff)
downloadlinux-424e7834e293936a54fcf05173f2884171adc5a3.tar.gz
bnx2x: fix built-in kernel driver load failure
Commit b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0") added request_firmware() logic in probe() which caused load failure when firmware file is not present in initrd (below), as access to firmware file is not feasible during probe. Direct firmware load for bnx2x/bnx2x-e2-7.13.15.0.fw failed with error -2 Direct firmware load for bnx2x/bnx2x-e2-7.13.21.0.fw failed with error -2 This patch fixes this issue by - 1. Removing request_firmware() logic from the probe() such that .ndo_open() handle it as it used to handle it earlier 2. Given request_firmware() is removed from probe(), so driver has to relax FW version comparisons a bit against the already loaded FW version (by some other PFs of same adapter) to allow different compatible/close enough FWs with which multiple PFs may run with (in different environments), as the given PF who is in probe flow has no idea now with which firmware file version it is going to initialize the device in ndo_open() Link: https://lore.kernel.org/all/46f2d9d9-ae7f-b332-ddeb-b59802be2bab@molgen.mpg.de/ Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Fixes: b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220316214613.6884-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x.h2
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c28
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c15
3 files changed, 19 insertions, 26 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index a19dd6797070..2209d99b3404 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -2533,6 +2533,4 @@ void bnx2x_register_phc(struct bnx2x *bp);
* Meant for implicit re-load flows.
*/
int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp);
-int bnx2x_init_firmware(struct bnx2x *bp);
-void bnx2x_release_firmware(struct bnx2x *bp);
#endif /* bnx2x.h */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 8d36ebbf08e1..5729a5ab059d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2364,24 +2364,30 @@ int bnx2x_compare_fw_ver(struct bnx2x *bp, u32 load_code, bool print_err)
/* is another pf loaded on this engine? */
if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP &&
load_code != FW_MSG_CODE_DRV_LOAD_COMMON) {
- /* build my FW version dword */
- u32 my_fw = (bp->fw_major) + (bp->fw_minor << 8) +
- (bp->fw_rev << 16) + (bp->fw_eng << 24);
+ u8 loaded_fw_major, loaded_fw_minor, loaded_fw_rev, loaded_fw_eng;
+ u32 loaded_fw;
/* read loaded FW from chip */
- u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM);
+ loaded_fw = REG_RD(bp, XSEM_REG_PRAM);
- DP(BNX2X_MSG_SP, "loaded fw %x, my fw %x\n",
- loaded_fw, my_fw);
+ loaded_fw_major = loaded_fw & 0xff;
+ loaded_fw_minor = (loaded_fw >> 8) & 0xff;
+ loaded_fw_rev = (loaded_fw >> 16) & 0xff;
+ loaded_fw_eng = (loaded_fw >> 24) & 0xff;
+
+ DP(BNX2X_MSG_SP, "loaded fw 0x%x major 0x%x minor 0x%x rev 0x%x eng 0x%x\n",
+ loaded_fw, loaded_fw_major, loaded_fw_minor, loaded_fw_rev, loaded_fw_eng);
/* abort nic load if version mismatch */
- if (my_fw != loaded_fw) {
+ if (loaded_fw_major != BCM_5710_FW_MAJOR_VERSION ||
+ loaded_fw_minor != BCM_5710_FW_MINOR_VERSION ||
+ loaded_fw_eng != BCM_5710_FW_ENGINEERING_VERSION ||
+ loaded_fw_rev < BCM_5710_FW_REVISION_VERSION_V15) {
if (print_err)
- BNX2X_ERR("bnx2x with FW %x was already loaded which mismatches my %x FW. Aborting\n",
- loaded_fw, my_fw);
+ BNX2X_ERR("loaded FW incompatible. Aborting\n");
else
- BNX2X_DEV_INFO("bnx2x with FW %x was already loaded which mismatches my %x FW, possibly due to MF UNDI\n",
- loaded_fw, my_fw);
+ BNX2X_DEV_INFO("loaded FW incompatible, possibly due to MF UNDI\n");
+
return -EBUSY;
}
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index eedb48d945ed..c19b072f3a23 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -12319,15 +12319,6 @@ static int bnx2x_init_bp(struct bnx2x *bp)
bnx2x_read_fwinfo(bp);
- if (IS_PF(bp)) {
- rc = bnx2x_init_firmware(bp);
-
- if (rc) {
- bnx2x_free_mem_bp(bp);
- return rc;
- }
- }
-
func = BP_FUNC(bp);
/* need to reset chip if undi was active */
@@ -12340,7 +12331,6 @@ static int bnx2x_init_bp(struct bnx2x *bp)
rc = bnx2x_prev_unload(bp);
if (rc) {
- bnx2x_release_firmware(bp);
bnx2x_free_mem_bp(bp);
return rc;
}
@@ -13409,7 +13399,7 @@ do { \
(u8 *)bp->arr, len); \
} while (0)
-int bnx2x_init_firmware(struct bnx2x *bp)
+static int bnx2x_init_firmware(struct bnx2x *bp)
{
const char *fw_file_name, *fw_file_name_v15;
struct bnx2x_fw_file_hdr *fw_hdr;
@@ -13509,7 +13499,7 @@ request_firmware_exit:
return rc;
}
-void bnx2x_release_firmware(struct bnx2x *bp)
+static void bnx2x_release_firmware(struct bnx2x *bp)
{
kfree(bp->init_ops_offsets);
kfree(bp->init_ops);
@@ -14026,7 +14016,6 @@ static int bnx2x_init_one(struct pci_dev *pdev,
return 0;
init_one_freemem:
- bnx2x_release_firmware(bp);
bnx2x_free_mem_bp(bp);
init_one_exit: