diff options
author | Rajendra Nayak <rnayak@codeaurora.org> | 2015-04-20 17:26:28 +0100 |
---|---|---|
committer | Srinivas Kandagatla <srinivas.kandagatla@linaro.org> | 2015-04-20 17:32:46 +0100 |
commit | 88b48548eea5b5fb2a878d9a31105b687dff71cf (patch) | |
tree | 0d3ff8d97f9479f96277d9080ed83fe874e94193 | |
parent | 2dad113293cb1352e159c065cf8d3f0e53232051 (diff) |
arm64: dts: msm8916: Add thermal zones, tsens and eeprom nodes
Add thermal zones, tsens and eeprom nodes
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916.dtsi | 66 |
1 files changed, 66 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 0eee77387962..1094b1c13a9e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -112,6 +112,49 @@ }; }; + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cpu_alert0: trip@0 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip@1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + cpu_alert2: trip@0 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip@1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -837,6 +880,29 @@ #size-cells = <0>; cell-index = <0>; }; + + qfprom: qfprom@5c000 { + compatible = "qcom,qfprom"; + reg = <0x5c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + tsens_caldata: caldata@d0 { + reg = <0xd0 0x8>; + }; + tsens_calsel: calsel@ec { + reg = <0xec 0x4>; + }; + }; + + tsens: thermal-sensor@4a8000 { + compatible = "qcom,msm8916-tsens"; + reg = <0x4a8000 0x2000>; + eeproms = <&tsens_caldata>, <&tsens_calsel>; + eeprom-names = "calib_data", "calib_sel"; + qcom,tsens-slopes = <3200 3200 3200 3200 3200>; + qcom,sensor-id = <0 1 2 4 5>; + #thermal-sensor-cells = <1>; + }; }; }; |