Age | Commit message (Collapse) | Author |
|
The IMX577 is on CCI1/CSI2 providing four lanes of camera data.
An example media-ctl pipeline for this part is:
media-ctl --reset
media-ctl -v -d /dev/media0 -V '"imx412 '20-001a'":0[fmt:SRGGB10/4056x3040 field:none]'
media-ctl -V '"msm_csiphy2":0[fmt:SRGGB10/4056x3040]'
media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]'
media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Depending on the platform we may need to enable and disable three separate
regulators for the imx412.
- DOVDD
Digital I/O power
- AVDD
Analog power
- DVDD
Digital core power
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Add the ability to read from DT and apply a clock-rate specified therein.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
sm8250 has two CCI busses with two I2C busses apiece.
Co-developed-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
There are a number of pin mux descriptions for the CAMSS block which are
defined downstream.
Bring in the definitions now. Subsequent changes will optionally activate
those muxes for different sm8250 based boards.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Adds a CAMSS definition block.
Co-developed-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Add the camcc DT node for the Camera Clock Controller on sm8250.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
The sm8250 CAMSS CSID depends on the VFE it is attached to being powered on
and clocked prior to taking the CSID out of reset.
It is possible to open just the CSID subdev from libcamera and attempt to
bring the CSID block up.
If we do not first bring up the VFE the CSID will fail to come out of
reset.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Downstream makes some pretty explicit comments about voting for bus
bandwidth prior to camcc_camnoc_axi_clk_src. Working with camx downstream
also shows that the bandwidth vote is required to get that root clock
working.
Add a simple mechanism to declare set and unset named NOCs. Whereas the
objective is to enable the sm8250 specifically the code has been
implemented to allow setting of whatever NOCs different SoCs using this
driver may require.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
The Titan 480 camss found on SM8250 has 6 CSIPHY and 4 VFE/CSID.
CSID is compatible with the Titan 170 CSID, but the Titan 480 CSID are
inside the VFE region (between the "top" and "bus" registers), so a
workaround is added to avoid ioremap failure.
[bod] Fixed setting camnoc_axi_clk_src instead of camcc_camnoc_axi_clk
[jgrahsl, bod] Add slow_ahb_src clock values
[jgrahsl, bod] Add cpa_ahb clock values
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Co-developed-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Julian Grahsl <jgrahsl@snap.com>
Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Add this common format to the various format lists relevant to sdm845.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Add support for VFE found on SM8250 (Titan 480). This implementation is
based on the titan 170 implementation. It supports the normal and lite VFE,
and only supports the RDI0 capture path.
[bod: Updates hw_version callback]
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
This function waits for halt_complete but doesn't do anything to cause
it to complete, and always hits the "VFE halt timeout" error. Just delete
this code for now.
Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
vfe->id isn't set yet, so use "id" instead here.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
This isn't used and only works because devm_regulator_get() returns a dummy
regulator.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
At least for titan HW, CSID don't have an associated regulator. This change
is necessary to be able to model this in the CSID resources.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Use the "HALT_CMD_RESUME_AT_FRAME_BOUNDARY" define instead of a "1" which
is otherwise confusing, and add a "HALT_CMD_HALT_AT_FRAME_BOUNDARY" which
is set when disabling.
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Change the IS_LITE condition so that it returns true for the second lite
vfe found on titan 480 hardware (8250), which will have id == 3.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
This is a leftover from my original patches, it doesn't serve any purpose.
(it was a reminder to figure out how downstream sets a particular field in
the register).
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
csid_isr() only checks for the reset irq, so enabling any other irqs
doesn't make sense. The "RDI irq" comment is also wrong, the register
should be CSID_CSI2_RDIN_IRQ_MASK. Without this fix there may be an
excessive amount of irqs.
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Use the decode_format/data_type from the "format" struct instead of a
hardcoded 10-bit format.
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Add support for CSIPHY (2PH/DPHY mode) found on SM8250 hardware.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
The driver does nothing with the interrupts, so set the irq mask registers
to zero to avoid wasting CPU time for nothing.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Avoid unnecessary noise in normal usage (it prints every time CSIPHY is
powered on).
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Add bindings for qcom,sm8250-camss in order to support the camera
subsystem for SM8250.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Pull more block driver updates from Jens Axboe:
- Last series adding error handling support for add_disk() in drivers.
After this one, and once the SCSI side has been merged, we can
finally annotate add_disk() as must_check. (Luis)
- bcache fixes (Coly)
- zram fixes (Ming)
- ataflop locking fix (Tetsuo)
- nbd fixes (Ye, Yu)
- MD merge via Song
- Cleanup (Yang)
- sysfs fix (Guoqing)
- Misc fixes (Geert, Wu, luo)
* tag 'for-5.16/drivers-2021-11-09' of git://git.kernel.dk/linux-block: (34 commits)
bcache: Revert "bcache: use bvec_virt"
ataflop: Add missing semicolon to return statement
floppy: address add_disk() error handling on probe
ataflop: address add_disk() error handling on probe
block: update __register_blkdev() probe documentation
ataflop: remove ataflop_probe_lock mutex
mtd/ubi/block: add error handling support for add_disk()
block/sunvdc: add error handling support for add_disk()
z2ram: add error handling support for add_disk()
nvdimm/pmem: use add_disk() error handling
nvdimm/pmem: cleanup the disk if pmem_release_disk() is yet assigned
nvdimm/blk: add error handling support for add_disk()
nvdimm/blk: avoid calling del_gendisk() on early failures
nvdimm/btt: add error handling support for add_disk()
nvdimm/btt: use goto error labels on btt_blk_init()
loop: Remove duplicate assignments
drbd: Fix double free problem in drbd_create_device
nvdimm/btt: do not call del_gendisk() if not needed
bcache: fix use-after-free problem in bcache_device_free()
zram: replace fsync_bdev with sync_blockdev
...
|
|
Pull block fixes from Jens Axboe:
- Set of fixes for the batched tag allocation (Ming, me)
- add_disk() error handling fix (Luis)
- Nested queue quiesce fixes (Ming)
- Shared tags init error handling fix (Ye)
- Misc cleanups (Jean, Ming, me)
* tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block:
nvme: wait until quiesce is done
scsi: make sure that request queue queiesce and unquiesce balanced
scsi: avoid to quiesce sdev->request_queue two times
blk-mq: add one API for waiting until quiesce is done
blk-mq: don't free tags if the tag_set is used by other device in queue initialztion
block: fix device_add_disk() kobject_create_and_add() error handling
block: ensure cached plug request matches the current queue
block: move queue enter logic into blk_mq_submit_bio()
block: make bio_queue_enter() fast-path available inline
block: split request allocation components into helpers
block: have plug stored requests hold references to the queue
blk-mq: update hctx->nr_active in blk_mq_end_request_batch()
blk-mq: add RQF_ELV debug entry
blk-mq: only try to run plug merge if request has same queue with incoming bio
block: move RQF_ELV setting into allocators
dm: don't stop request queue after the dm device is suspended
block: replace always false argument with 'false'
block: assign correct tag before doing prefetch of request
blk-mq: fix redundant check of !e expression
|
|
Pull more bdev size updates from Jens Axboe:
"Two followup changes for the bdev-size series from this merge window:
- Add loff_t cast to bdev_nr_bytes() (Christoph)
- Use bdev_nr_bytes() consistently for the block parts at least (me)"
* tag 'for-5.16/bdev-size-2021-11-09' of git://git.kernel.dk/linux-block:
block: use new bdev_nr_bytes() helper for blkdev_{read,write}_iter()
block: add a loff_t cast to bdev_nr_bytes
|
|
Pull io_uring fixes from Jens Axboe:
"Minor fixes that should go into the 5.16 release:
- Fix max worker setting not working correctly on NUMA (Beld)
- Correctly return current setting for max workers if zeroes are
passed in (Pavel)
- io_queue_sqe_arm_apoll() cleanup, as identified during the initial
merge (Pavel)
- Misc fixes (Nghia, me)"
* tag 'io_uring-5.16-2021-11-09' of git://git.kernel.dk/linux-block:
io_uring: honour zeroes as io-wq worker limits
io_uring: remove dead 'sqe' store
io_uring: remove redundant assignment to ret in io_register_iowq_max_workers()
io-wq: fix max-workers not correctly set on multi-node system
io_uring: clean up io_queue_sqe_arm_apoll
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Add DM core support for emitting audit events through the audit
subsystem. Also enhance both the integrity and crypt targets to emit
events to via dm-audit.
- Various other simple code improvements and cleanups.
* tag 'for-5.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm table: log table creation error code
dm: make workqueue names device-specific
dm writecache: Make use of the helper macro kthread_run()
dm crypt: Make use of the helper macro kthread_run()
dm verity: use bvec_kmap_local in verity_for_bv_block
dm log writes: use memcpy_from_bvec in log_writes_map
dm integrity: use bvec_kmap_local in __journal_read_write
dm integrity: use bvec_kmap_local in integrity_metadata
dm: add add_disk() error handling
dm: Remove redundant flush_workqueue() calls
dm crypt: log aead integrity violations to audit subsystem
dm integrity: log audit events for dm-integrity target
dm: introduce audit event module for device mapper
|
|
Pull dma-mapping updates from Christoph Hellwig:
"Just a small set of changes this time. The request dma_direct_alloc
cleanups are still under review and haven't made the cut.
Summary:
- convert sparc32 to the generic dma-direct code
- use bitmap_zalloc (Christophe JAILLET)"
* tag 'dma-mapping-5.16' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: use 'bitmap_zalloc()' when applicable
sparc32: use DMA_DIRECT_REMAP
sparc32: remove dma_make_coherent
sparc32: remove the call to dma_make_coherent in arch_dma_free
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
- Fix a regression introduced in the last cycle
- Fix a use-after-free in the AIO path
- Fix a bogus warning reported by syzbot
* tag 'ovl-update-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix filattr copy-up failure
ovl: fix warning in ovl_create_real()
ovl: fix use after free in struct ovl_aio_req
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fix a possible of deadlock in case inode writeback is in progress
during dentry reclaim
- Fix a crash in case of page stealing
- Selectively invalidate cached attributes, possibly improving
performance
- Allow filesystems to disable data flushing from ->flush()
- Misc fixes and cleanups
* tag 'fuse-update-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (23 commits)
fuse: fix page stealing
virtiofs: use strscpy for copying the queue name
fuse: add FOPEN_NOFLUSH
fuse: only update necessary attributes
fuse: take cache_mask into account in getattr
fuse: add cache_mask
fuse: move reverting attributes to fuse_change_attributes()
fuse: simplify local variables holding writeback cache state
fuse: cleanup code conditional on fc->writeback_cache
fuse: fix attr version comparison in fuse_read_update_size()
fuse: always invalidate attributes after writes
fuse: rename fuse_write_update_size()
fuse: don't bump attr_version in cached write
fuse: selective attribute invalidation
fuse: don't increment nlink in link()
fuse: decrement nlink on overwriting rename
fuse: simplify __fuse_write_file_get()
fuse: move fuse_invalidate_attr() into fuse_update_ctime()
fuse: delete redundant code
fuse: use kmap_local_page()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs fixes from Mike Marshall:
- fix sb refcount leak when allocate sb info failed (Chenyuan Mi)
- fix error return code of orangefs_revalidate_lookup() (Jia-Ju Bai)
- remove redundant initialization of variable ret (Colin Ian King)
* tag 'for-linus-5.16-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: Fix sb refcount leak when allocate sb info failed.
fs: orangefs: fix error return code of orangefs_revalidate_lookup()
orangefs: Remove redundant initialization of variable ret
|
|
Pull 9p updates from Dominique Martinet:
"Fixes, netfs read support and checkpatch rewrite:
- fix syzcaller uninitialized value usage after missing error check
- add module autoloading based on transport name
- convert cached reads to use netfs helpers
- adjust readahead based on transport msize
- and many, many checkpatch.pl warning fixes..."
* tag '9p-for-5.16-rc1' of git://github.com/martinetd/linux:
9p: fix a bunch of checkpatch warnings
9p: set readahead and io size according to maxsize
9p p9mode2perm: remove useless strlcpy and check sscanf return code
9p v9fs_parse_options: replace simple_strtoul with kstrtouint
9p: fix file headers
fs/9p: fix indentation and Add missing a blank line after declaration
fs/9p: fix warnings found by checkpatch.pl
9p: fix minor indentation and codestyle
fs/9p: cleanup: opening brace at the beginning of the next line
9p: Convert to using the netfs helper lib to do reads and caching
fscache_cookie_enabled: check cookie is valid before accessing it
net/9p: autoload transport modules
9p/net: fix missing error check in p9_check_errors
|
|
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
|
|
Compilation of ipc/ipc_sysctl.c is controlled by
obj-$(CONFIG_SYSVIPC_SYSCTL)
[see ipc/Makefile]
And CONFIG_SYSVIPC_SYSCTL depends on SYSCTL
[see init/Kconfig]
An SYSCTL is selected by PROC_SYSCTL.
[see fs/proc/Kconfig]
Thus: #ifndef CONFIG_PROC_SYSCTL in ipc/ipc_sysctl.c is impossible, the
fallback can be removed.
Link: https://lkml.kernel.org/r/20210918145337.3369-1-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This commit removes the requirement to be root to modify sem_next_id,
msg_next_id and shm_next_id and checks checkpoint_restore_ns_capable
instead.
Since those files are specific to the IPC namespace, there is no reason
they should require root privileges. This is similar to ns_last_pid,
which also only checks checkpoint_restore_ns_capable.
[akpm@linux-foundation.org: ipc/ipc_sysctl.c needs capability.h for checkpoint_restore_ns_capable()]
Link: https://lkml.kernel.org/r/20210916163717.3179496-1-mclapinski@google.com
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Manfred Spraul <manfred@colorfullife.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When running a test program, 'run_one()' checks if the program has the
execution permission and fails if it doesn't. However, it's easy to
mistakenly lose the permissions, as some common tools like 'diff' don't
support the permission change well[1]. Compared to that, making mistakes
in the test program's path would only rare, as those are explicitly listed
in 'TEST_PROGS'. Therefore, it might make more sense to resolve the
situation on our own and run the program.
For this reason, this commit makes the test program runner function still
print the warning message but to try parsing the interpreter of the
program and to explicitly run it with the interpreter, in this case.
[1] https://lore.kernel.org/mm-commits/YRJisBs9AunccCD4@kroah.com/
Link: https://lkml.kernel.org/r/20210810164534.25902-1-sj38.park@gmail.com
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We don't want user space to be able to map virtio-mem device memory
directly (e.g., via /dev/mem) in order to have guarantees that in a sane
setup we'll never accidentially access unplugged memory within the
device-managed region of a virtio-mem device, just as required by the
virtio-spec.
As soon as the virtio-mem driver is loaded, the device region is visible
in /proc/iomem via the parent device region. From that point on user
space is aware of the device region and we want to disallow mapping
anything inside that region (where we will dynamically (un)plug memory)
until the driver has been unloaded cleanly and e.g., another driver might
take over.
By creating our parent IORESOURCE_SYSTEM_RAM resource with
IORESOURCE_EXCLUSIVE, we will disallow any /dev/mem access to our device
region until the driver was unloaded cleanly and removed the parent
region. This will work even though only some memory blocks are actually
currently added to Linux and appear as busy in the resource tree.
So access to the region from user space is only possible
a) if we don't load the virtio-mem driver.
b) after unloading the virtio-mem driver cleanly.
Don't build virtio-mem if access to /dev/mem cannot be restricticted -- if
we have CONFIG_DEVMEM=y but CONFIG_STRICT_DEVMEM is not set.
Link: https://lkml.kernel.org/r/20210920142856.17758-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
virtio-mem dynamically exposes memory inside a device memory region as
system RAM to Linux, coordinating with the hypervisor which parts are
actually "plugged" and consequently usable/accessible.
On the one hand, the virtio-mem driver adds/removes whole memory blocks,
creating/removing busy IORESOURCE_SYSTEM_RAM resources, on the other
hand, it logically (un)plugs memory inside added memory blocks,
dynamically either exposing them to the buddy or hiding them from the
buddy and marking them PG_offline.
In contrast to physical devices, like a DIMM, the virtio-mem driver is
required to actually make use of any of the device-provided memory,
because it performs the handshake with the hypervisor. virtio-mem
memory cannot simply be access via /dev/mem without a driver.
There is no safe way to:
a) Access plugged memory blocks via /dev/mem, as they might contain
unplugged holes or might get silently unplugged by the virtio-mem
driver and consequently turned inaccessible.
b) Access unplugged memory blocks via /dev/mem because the virtio-mem
driver is required to make them actually accessible first.
The virtio-spec states that unplugged memory blocks MUST NOT be written,
and only selected unplugged memory blocks MAY be read. We want to make
sure, this is the case in sane environments -- where the virtio-mem driver
was loaded.
We want to make sure that in a sane environment, nobody "accidentially"
accesses unplugged memory inside the device managed region. For example,
a user might spot a memory region in /proc/iomem and try accessing it via
/dev/mem via gdb or dumping it via something else. By the time the mmap()
happens, the memory might already have been removed by the virtio-mem
driver silently: the mmap() would succeeed and user space might
accidentially access unplugged memory.
So once the driver was loaded and detected the device along the
device-managed region, we just want to disallow any access via /dev/mem to
it.
In an ideal world, we would mark the whole region as busy ("owned by a
driver") and exclude it; however, that would be wrong, as we don't really
have actual system RAM at these ranges added to Linux ("busy system RAM").
Instead, we want to mark such ranges as "not actual busy system RAM but
still soft-reserved and prepared by a driver for future use."
Let's teach iomem_is_exclusive() to reject access to any range with
"IORESOURCE_SYSTEM_RAM | IORESOURCE_EXCLUSIVE", even if not busy and even
if "iomem=relaxed" is set. Introduce EXCLUSIVE_SYSTEM_RAM to make it
easier for applicable drivers to depend on this setting in their Kconfig.
For now, there are no applicable ranges and we'll modify virtio-mem next
to properly set IORESOURCE_EXCLUSIVE on the parent resource container it
creates to contain all actual busy system RAM added via
add_memory_driver_managed().
Link: https://lkml.kernel.org/r/20210920142856.17758-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "virtio-mem: disallow mapping virtio-mem memory via /dev/mem", v5.
Let's add the basic infrastructure to exclude some physical memory regions
marked as "IORESOURCE_SYSTEM_RAM" completely from /dev/mem access, even
though they are not marked IORESOURCE_BUSY and even though "iomem=relaxed"
is set. Resource IORESOURCE_EXCLUSIVE for that purpose instead of adding
new flags to express something similar to "soft-busy" or "not busy yet,
but already prepared by a driver and not to be mapped by user space".
Use it for virtio-mem, to disallow mapping any virtio-mem memory via
/dev/mem to user space after the virtio-mem driver was loaded.
This patch (of 3):
We end up traversing subtrees of ranges we are not interested in; let's
optimize this case, skipping such subtrees, cleaning up the function a
bit.
For example, in the following configuration (/proc/iomem):
00000000-00000fff : Reserved
00001000-00057fff : System RAM
00058000-00058fff : Reserved
00059000-0009cfff : System RAM
0009d000-000fffff : Reserved
000a0000-000bffff : PCI Bus 0000:00
000c0000-000c3fff : PCI Bus 0000:00
000c4000-000c7fff : PCI Bus 0000:00
000c8000-000cbfff : PCI Bus 0000:00
000cc000-000cffff : PCI Bus 0000:00
000d0000-000d3fff : PCI Bus 0000:00
000d4000-000d7fff : PCI Bus 0000:00
000d8000-000dbfff : PCI Bus 0000:00
000dc000-000dffff : PCI Bus 0000:00
000e0000-000e3fff : PCI Bus 0000:00
000e4000-000e7fff : PCI Bus 0000:00
000e8000-000ebfff : PCI Bus 0000:00
000ec000-000effff : PCI Bus 0000:00
000f0000-000fffff : PCI Bus 0000:00
000f0000-000fffff : System ROM
00100000-3fffffff : System RAM
40000000-403fffff : Reserved
40000000-403fffff : pnp 00:00
40400000-80a79fff : System RAM
...
We don't have to look at any children of "0009d000-000fffff : Reserved"
if we can just skip these 15 items directly because the parent range is
not of interest.
Link: https://lkml.kernel.org/r/20210920142856.17758-1-david@redhat.com
Link: https://lkml.kernel.org/r/20210920142856.17758-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is related to two previous changes. Commit dfe4529ee4d3
("scripts/gdb: find vmlinux where it was before") and commit da036ae14762
("scripts/gdb: handle split debug").
Although Chrome OS has been using the debug suffix for modules for a
while, it has just recently started using it for vmlinux as well. That
means we've now got to improve the detection of "vmlinux" to also handle
that it might end with ".debug".
Link: https://lkml.kernel.org/r/20211028151120.v2.1.Ie6bd5a232f770acd8c9ffae487a02170bad3e963@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kcov code mixes local_irq_save() and spin_lock() in
kcov_remote_{start|end}(). This creates a warning on PREEMPT_RT because
local_irq_save() disables interrupts and spin_lock_t is turned into a
sleeping lock which can not be acquired in a section with disabled
interrupts.
The kcov_remote_lock is used to synchronize the access to the hash-list
kcov_remote_map. The local_irq_save() block protects access to the
per-CPU data kcov_percpu_data.
There is no compelling reason to change the lock type to raw_spin_lock_t
to make it work with local_irq_save(). Changing it would require to
move memory allocation (in kcov_remote_add()) and deallocation outside
of the locked section.
Adding an unlimited amount of entries to the hashlist will increase the
IRQ-off time during lookup. It could be argued that this is debug code
and the latency does not matter. There is however no need to do so and
it would allow to use this facility in an RT enabled build.
Using a local_lock_t instead of local_irq_save() has the befit of adding
a protection scope within the source which makes it obvious what is
protected. On a !PREEMPT_RT && !LOCKDEP build the local_lock_irqsave()
maps directly to local_irq_save() so there is overhead at runtime.
Replace the local_irq_save() section with a local_lock_t.
Link: https://lkml.kernel.org/r/20210923164741.1859522-6-bigeasy@linutronix.de
Link: https://lore.kernel.org/r/20210830172627.267989-6-bigeasy@linutronix.de
Reported-by: Clark Williams <williams@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kcov_remote_start() may need to allocate memory in the in_task() case
(otherwise per-CPU memory has been pre-allocated) and therefore requires
enabled interrupts.
The interrupts are enabled before checking if the allocation is required
so if no allocation is required then the interrupts are needlessly enabled
and disabled again.
Enable interrupts only if memory allocation is performed.
Link: https://lkml.kernel.org/r/20210923164741.1859522-5-bigeasy@linutronix.de
Link: https://lore.kernel.org/r/20210830172627.267989-5-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During boot kcov allocates per-CPU memory which is used later if remote/
softirq processing is enabled.
Allocate the per-CPU memory on the CPU local node to avoid cross node
memory access.
Link: https://lkml.kernel.org/r/20210923164741.1859522-4-bigeasy@linutronix.de
Link: https://lore.kernel.org/r/20210830172627.267989-4-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The example code uses the variable `ip' but never declares it.
Declare `ip' as a 64bit variable which is the same type as the array
from which it loads its value.
Link: https://lkml.kernel.org/r/20210923164741.1859522-3-bigeasy@linutronix.de
Link: https://lore.kernel.org/r/20210830172627.267989-3-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "kcov: PREEMPT_RT fixup + misc", v2.
The last patch in series is follow-up to address the PREEMPT_RT issue
within in kcov reported by Clark [1]. Patches 1-3 are smaller things that
I noticed while staring at it. Patch 4 is small change which makes
replacement in #5 simpler / more obvious.
[1] https://lkml.kernel.org/r/20210809155909.333073de@theseus.lan
This patch (of 5):
The first example code has includes at the top, the following two
example share that part. The last example (remote coverage collection)
requires the linux/types.h header file due its __aligned_u64 usage.
Add the linux/types.h to the top most example and a comment that the
header files from above are required as it is done in the second
example.
Link: https://lkml.kernel.org/r/20210923164741.1859522-1-bigeasy@linutronix.de
Link: https://lore.kernel.org/r/20210830172627.267989-2-bigeasy@linutronix.de
Link: https://lkml.kernel.org/r/20210923164741.1859522-2-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Clark Williams <williams@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There were runtime checks about sizes of struct v7_super_block and struct
sysv_inode. If one of these checks fail the kernel will panic. Since
these values are known at compile time let's use BUILD_BUG_ON(), because
it's a standard mechanism for validation checking at build time
Link: https://lkml.kernel.org/r/20210813123020.22971-1-paskripkin@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use swap() instead of reimplementing it.
Link: https://lkml.kernel.org/r/20210909022046.8151-1-ran.xiaokai@zte.com.cn
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Cc: Gabriel Krisman Bertazi <krisman@collabora.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|