arm64: dts: qcom: sm8250: camss: Add downstream camera pin defintions

There are a number of pin mux descriptions for the CAMSS block which are
defined downstream.

Bring in the definitions now. Subsequent changes will optionally activate
those muxes for different sm8250 based boards.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

1 files changed, 471 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 7806076f9cb8..0126e7f70b0f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3110,6 +3110,477 @@
 			gpio-ranges = <&tlmm 0 0 181>;
 			wakeup-parent = <&pdc>;
 
+			cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+				/* MCLK0 */
+				mux {
+					pins = "gpio94";
+					function = "cam_mclk";
+				};
+
+				config {
+					pins = "gpio94";
+					bias-disable; /* No PULL */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+				/* MCLK0 */
+				mux {
+					pins = "gpio94";
+					function = "cam_mclk";
+				};
+
+				config {
+					pins = "gpio94";
+					bias-pull-down; /* PULL DOWN */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+				/* MCLK1 */
+				mux {
+					pins = "gpio95";
+					function = "cam_mclk";
+				};
+
+				config {
+					pins = "gpio95";
+					bias-disable; /* No PULL */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+				/* MCLK1 */
+				mux {
+					pins = "gpio95";
+					function = "cam_mclk";
+				};
+
+				config {
+					pins = "gpio95";
+					bias-pull-down; /* PULL DOWN */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+				/* MCLK2 */
+				mux {
+					pins = "gpio96";
+					function = "cam_mclk";
+				};
+
+				config {
+					pins = "gpio96";
+					bias-disable;		/* No PULL */
+					drive-strength = <2>;	/* 2 MA */
+				};
+			};
+
+			cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+				/* MCLK2 */
+				mux {
+					pins = "gpio96";
+					function = "cam_mclk";
+				};
+
+				config {
+					pins = "gpio96";
+					bias-pull-down; /* PULL DOWN */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+				/* MCLK3 */
+				mux {
+					pins = "gpio97";
+					function = "cam_mclk";
+				};
+
+				config {
+					pins = "gpio97";
+					bias-disable; /* No PULL */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+				/* MCLK3 */
+				mux {
+					pins = "gpio97";
+					function = "cam_mclk";
+				};
+
+				config {
+					pins = "gpio97";
+					bias-pull-down; /* PULL DOWN */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_mclk4_active: cam_sensor_mclk4_active {
+				/* MCLK4 */
+				mux {
+					pins = "gpio98";
+					function = "cam_mclk";
+				};
+
+				config {
+					pins = "gpio98";
+					bias-disable; /* No PULL */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_mclk4_suspend: cam_sensor_mclk4_suspend {
+				/* MCLK4 */
+				mux {
+					pins = "gpio98";
+					function = "cam_mclk";
+				};
+
+				config {
+					pins = "gpio98";
+					bias-pull-down; /* PULL DOWN */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_mclk5_active: cam_sensor_mclk5_active {
+				/* MCLK5 */
+				mux {
+					pins = "gpio99";
+					function = "cam_mclk";
+				};
+
+				config {
+					pins = "gpio99";
+					bias-disable; /* No PULL */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_mclk5_suspend: cam_sensor_mclk5_suspend {
+				/* MCLK5 */
+				mux {
+					pins = "gpio99";
+					function = "cam_mclk";
+				};
+
+				config {
+					pins = "gpio99";
+					bias-pull-down; /* PULL DOWN */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_mclk6_active: cam_sensor_mclk6_active {
+				/* MCLK6 */
+				mux {
+					pins = "gpio100";
+					function = "cam_mclk";
+				};
+
+				config {
+					pins = "gpio100";
+					bias-disable; /* No PULL */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_mclk6_suspend: cam_sensor_mclk6_suspend {
+				/* MCLK6 */
+				mux {
+					pins = "gpio100";
+					function = "cam_mclk";
+				};
+
+				config {
+					pins = "gpio100";
+					bias-pull-down; /* PULL DOWN */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_active_rear: cam_sensor_active_rear {
+				/* RESET REAR */
+				mux {
+					pins = "gpio93";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio93";
+					bias-disable; /* No PULL */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_suspend_rear: cam_sensor_suspend_rear {
+				/* RESET REAR */
+				mux {
+					pins = "gpio93";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio93";
+					bias-pull-down; /* PULL DOWN */
+					drive-strength = <2>; /* 2 MA */
+					output-low;
+				};
+			};
+
+			cam_sensor_active_rear_aux: cam_sensor_active_rear_aux {
+				/* RESET REARAUX */
+				mux {
+					pins = "gpio92";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio92";
+					bias-disable; /* No PULL */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_suspend_rear_aux: cam_sensor_suspend_rear_aux {
+				/* RESET REARAUX */
+				mux {
+					pins = "gpio92";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio92";
+					bias-pull-down; /* PULL DOWN */
+					drive-strength = <2>; /* 2 MA */
+					output-low;
+				};
+			};
+
+			cam_sensor_active_rst2: cam_sensor_active_rst2 {
+				/* RESET 2 */
+				mux {
+					pins = "gpio78";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio78";
+					bias-disable; /* No PULL */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_suspend_rst2: cam_sensor_suspend_rst2 {
+				/* RESET 2 */
+				mux {
+					pins = "gpio78";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio78";
+					bias-pull-down; /* PULL DOWN */
+					drive-strength = <2>; /* 2 MA */
+					output-low;
+				};
+			};
+
+			cam_sensor_active_3: cam_sensor_active_3 {
+				/* RESET 3 */
+				mux {
+					pins = "gpio109";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio109";
+					bias-disable; /* No PULL */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_suspend_3: cam_sensor_suspend_3 {
+				/* RESET 3 */
+				mux {
+					pins = "gpio109";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio109";
+					bias-pull-down; /* PULL DOWN */
+					drive-strength = <2>; /* 2 MA */
+					output-low;
+				};
+			};
+
+			cam_sensor_active_4: cam_sensor_active_4 {
+				/* RESET 4 */
+				mux {
+					pins = "gpio130";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio130";
+					bias-disable; /* No PULL */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_suspend_4: cam_sensor_suspend_4 {
+				/* RESET 4 */
+				mux {
+					pins = "gpio130";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio130";
+					bias-pull-down; /* PULL DOWN */
+					drive-strength = <2>; /* 2 MA */
+					output-low;
+				};
+			};
+
+			cam_sensor_active_5: cam_sensor_active_5 {
+				/* RESET 5 */
+				mux {
+					pins = "gpio131";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio131";
+					bias-disable; /* No PULL */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_suspend_5: cam_sensor_suspend_5 {
+				/* RESET 5 */
+				mux {
+					pins = "gpio131";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio131";
+					bias-pull-down; /* PULL DOWN */
+					drive-strength = <2>; /* 2 MA */
+					output-low;
+				};
+			};
+
+			cam_sensor_active_6: cam_sensor_active_6 {
+				/* RESET 6 */
+				mux {
+					pins = "gpio114";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio114";
+					bias-disable; /* No PULL */
+					drive-strength = <2>; /* 2 MA */
+				};
+			};
+
+			cam_sensor_suspend_6: cam_sensor_suspend_6 {
+				/* RESET 6 */
+				mux {
+					pins = "gpio114";
+					function = "gpio";
+				};
+
+				config {
+					pins = "gpio114";
+					bias-pull-down; /* PULL DOWN */
+					drive-strength = <2>; /* 2 MA */
+					output-low;
+				};
+			};
+
+			cci0_default: cci0-default {
+				/* SDA, SCL */
+				pins = "gpio101", "gpio102";
+				function = "cci_i2c";
+
+				bias-pull-up;
+				drive-strength = <2>; /* 2 mA */
+			};
+
+			cci0_sleep: cci0-sleep {
+				/* SDA, SCL */
+				pins = "gpio101", "gpio102";
+				function = "cci_i2c";
+
+				drive-strength = <2>; /* 2 mA */
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default {
+				/* SDA, SCL */
+				pins = "gpio103", "gpio104";
+				function = "cci_i2c";
+
+				bias-pull-up;
+				drive-strength = <2>; /* 2 mA */
+			};
+
+			cci1_sleep: cci1-sleep {
+				/* SDA, SCL */
+				pins = "gpio103", "gpio104";
+				function = "cci_i2c";
+
+				drive-strength = <2>; /* 2 mA */
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default {
+				/* SDA, SCL */
+				pins = "gpio105","gpio106";
+				function = "cci_i2c";
+
+				bias-pull-up;
+				drive-strength = <2>; /* 2 mA */
+			};
+
+			cci2_sleep: cci2-sleep {
+				/* SDA, SCL */
+				pins = "gpio105","gpio106";
+				function = "cci_i2c";
+
+				bias-pull-down;
+				drive-strength = <2>; /* 2 mA */
+			};
+
+			cci3_default: cci3-default {
+				/* SDA, SCL */
+				pins = "gpio107","gpio108";
+				function = "cci_i2c";
+
+				bias-pull-up;
+				drive-strength = <2>; /* 2 mA */
+			};
+
+			cci3_sleep: cci3-sleep {
+				/* SDA, SCL */
+				pins = "gpio107","gpio108";
+				function = "cci_i2c";
+
+				bias-pull-down;
+				drive-strength = <2>; /* 2 mA */
+			};
+
 			pri_mi2s_active: pri-mi2s-active {
 				sclk {
 					pins = "gpio138";