RD-E1-Edge platform user guide
RD (Reference Design) is a collection of resources to provide a representative view of typical compute subsystems that can be designed and implemented using specific generations of Arm IP. RD-E1-Edge in particular is based on:
- 16x Neoverse E1 Cores with DynamIQ Shared Unit (DSU).
- Dedicated L2 cache: 256KB per core
- Shared L3 cache: 2MB per cluster
- CMN-600 with CML option: 8MB System Level Cache and 16MB Snoop Filter
- DMC-620 with 2xRDIMM DDR4-3200
- Multiple AXI expansion ports for I/O Coherent PCIe, Ethernet, offload
- Arm Cortex-M7 for System Control Processor (SCP) and Manageability Control Processor (MCP)
This document is a user guide on how to setup, build and run the software stack of RD-E1-Edge on Fixed Virtual Platform.
The minimum recommended host PC specification for building the software stack and running the RD-E1-Edge FVP model is a dual-core processor running at 2GHz with 8GB of RAM. For best performance, use a machine with a quad-core processor running at 2.6GHz with 16GB of RAM with free hard disk space of at least 64GB.
The software package has been tested on Ubuntu 16.04 LTS (64-bit) and Ubuntu 18.04 LTS (64-bit). This guide assumes that the user is on either of this operating system.
The software stack for RD-E1-Edge is available in multiple git repositories. In order to simplify downloading the software stack for RD-E1-Edge platform, repo tool can be used. This section explains how to setup git and repo tool.
Install Git by using the following command
sudo apt-get install git
Git installation can be confirmed by checking the version
This should return the git version in a format such as git version 2.7.4
Set name and email address in git
git config --global user.name "<your-name>" git config --global user.email "<firstname.lastname@example.org>"
Download the repo tool
sudo apt-get install repo
This completes the setup of the repo tool.
The manifest file, which contains the location of all the git repositories of RD-E1-Edge software stack, is available here. This section explains how to sync the software stack.
Switch to a new folder
mkdir rde1edge cd rde1edge
For obtaining the latest stable software stack, use the following commands to sync:
repo init -u https://git.linaro.org/landing-teams/working/arm/arm-reference-platforms-manifest.git -m pinned-rde1edge.xml -b refs/tags/<RELEASE_TAG> repo sync -j $(nproc) --fetch-submodules --force-sync
Note: The RELEASE_TAG can be found in the release notes, if obtained. If a release note is not available, or if a RELEASE_TAG is not known, see the section "Release Tags" below to obtain the most recent release tag.
For obtaining the software stack with latest upstream updates but which might not have been fully validated, use the following commands to sync:
repo init -u https://git.linaro.org/landing-teams/working/arm/arm-reference-platforms-manifest.git -m rde1edge.xml -b master repo sync -j $(nproc) --fetch-submodules --force-sync
This will download the RD-E1-Edge software stack into the rde1edge folder.
Run the following command to install all the required prerequisites to build the software stack:
It is mandatory to execute this script at least once before build and executing the software stack.
In addition to the prerequisites installed, gcc toolchain binaries have to be downloaded and placed at the tools/gcc folder. Use the following commands to download and untar the binaries:
# Move to the rde1edge software stack directory cd rde1edge # Create a folder for gcc under tools folder mkdir -p tools/gcc cd tools/gcc # Download and extract the binaries wget https://releases.linaro.org/components/toolchain/binaries/6.2-2016.11/aarch64-linux-gnu/gcc-linaro-6.2.1-2016.11-x86_64_aarch64-linux-gnu.tar.xz tar -xJf gcc-linaro-6.2.1-2016.11-x86_64_aarch64-linux-gnu.tar.xz wget https://releases.linaro.org/components/toolchain/binaries/6.2-2016.11/arm-linux-gnueabihf/gcc-linaro-6.2.1-2016.11-x86_64_arm-linux-gnueabihf.tar.xz tar -xJf gcc-linaro-6.2.1-2016.11-x86_64_arm-linux-gnueabihf.tar.xz wget https://armkeil.blob.core.windows.net/developer//sitecore/shell/-/media/Files/downloads/gnu-rm/5_4-2016q3/gcc-arm-none-eabi-5_4-2016q3-20160926-linux,-d-,tar.bz2 tar -xjf gcc-arm-none-eabi-5_4-2016q3-20160926-linux,-d-,tar.bz2
This completes the setup of the GCC toolchain binaries.
Follow the instruction in the installer and setup the FVP. Typically, the installer will ask to create a new folder in the home directory. You can either install the FVP in the home folder, or in the fastmodel/refinfra folder inside the rde1edge folder. If you would like to install in the fastmodel/refinfra folder, when asked for the install location, enter as fastmodel/refinfra.
Before launching any scripts from model-scripts folder, export the absolute path of the model as an environment variable.
This completes the steps to obtain the RD-E1-Edge Fast Model.
RD-E1-Edge software stack supports number of tests to explore its features. To begin with, one can start with the busybox boot, and then try installing and booting various linux distribution. RD-E1-Edge is target for infrastructure platforms and it supports variety of infrastructure specific features. All the supported tests are listed below: