aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/dvb-usb/mxl111sf-phy.c
blob: b741b3a7a325d423287512dce40440ad9556505a (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
/*
 *  mxl111sf-phy.c - driver for the MaxLinear MXL111SF
 *
 *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include "mxl111sf-phy.h"
#include "mxl111sf-reg.h"

int mxl111sf_init_tuner_demod(struct mxl111sf_state *state)
{
	struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = {
		{0x07, 0xff, 0x0c},
		{0x58, 0xff, 0x9d},
		{0x09, 0xff, 0x00},
		{0x06, 0xff, 0x06},
		{0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */
		{0x8d, 0x01, 0x01}, /* NEGATE_Q */
		{0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */
		{0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */
		{0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */
		{0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */
		{0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */
		{0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */
		{0x88, 0xff, 0xf0}, /* INF_THD = 240 */
		{0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */
		{0x00, 0xff, 0x01}, /* Change to page 1 */
		{0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */
		{0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */
		{0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */
		{0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */
		{0x00, 0xff, 0x00}, /* Change to page 0 */
		{0,    0,    0}
	};

	mxl_debug("()");

	return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default);
}

int mxl1x1sf_soft_reset(struct mxl111sf_state *state)
{
	int ret;
	mxl_debug("()");

	ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */
	if (mxl_fail(ret))
		goto fail;
	ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */
	mxl_fail(ret);
fail:
	return ret;
}

int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode)
{
	int ret;

	mxl_debug("(%s)", MXL_SOC_MODE == mode ?
		"MXL_SOC_MODE" : "MXL_TUNER_MODE");

	/* set device mode */
	ret = mxl111sf_write_reg(state, 0x03,
				 MXL_SOC_MODE == mode ? 0x01 : 0x00);
	if (mxl_fail(ret))
		goto fail;

	ret = mxl111sf_write_reg_mask(state,
				      0x7d, 0x40, MXL_SOC_MODE == mode ?
				      0x00 : /* enable impulse noise filter,
						INF_BYP = 0 */
				      0x40); /* disable impulse noise filter,
						INF_BYP = 1 */
	if (mxl_fail(ret))
		goto fail;

	state->device_mode = mode;
fail:
	return ret;
}

/* power up tuner */
int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff)
{
	mxl_debug("(%d)", onoff);

	return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00);
}

int mxl111sf_disable_656_port(struct mxl111sf_state *state)
{
	mxl_debug("()");

	return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00);
}

int mxl111sf_enable_usb_output(struct mxl111sf_state *state)
{
	mxl_debug("()");

	return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00);
}

/* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */
int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
			    unsigned int parallel_serial,
			    unsigned int msb_lsb_1st,
			    unsigned int clock_phase,
			    unsigned int mpeg_valid_pol,
			    unsigned int mpeg_sync_pol)
{
	int ret;
	u8 mode, tmp;

	mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st,
		  clock_phase, mpeg_valid_pol, mpeg_sync_pol);

	/* Enable PIN MUX */
	ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX);
	mxl_fail(ret);

	/* Configure MPEG Clock phase */
	mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);

	if (clock_phase == TSIF_NORMAL)
		mode &= ~V6_INVERTED_CLK_PHASE;
	else
		mode |= V6_INVERTED_CLK_PHASE;

	ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode);
	mxl_fail(ret);

	/* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity
	 * Get current configuration */
	ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode);
	mxl_fail(ret);

	/* Data Input mode */
	if (parallel_serial == TSIF_INPUT_PARALLEL) {
		/* Disable serial mode */
		mode &= ~V6_MPEG_IN_DATA_SERIAL;

		/* Enable Parallel mode */
		mode |= V6_MPEG_IN_DATA_PARALLEL;
	} else {
		/* Disable Parallel mode */
		mode &= ~V6_MPEG_IN_DATA_PARALLEL;

		/* Enable Serial Mode */
		mode |= V6_MPEG_IN_DATA_SERIAL;

		/* If serial interface is chosen, configure
		   MSB or LSB order in transmission */
		ret = mxl111sf_read_reg(state,
					V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
					&tmp);
		mxl_fail(ret);

		if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED)
			tmp |= V6_MPEG_SER_MSB_FIRST;
		else
			tmp &= ~V6_MPEG_SER_MSB_FIRST;

		ret = mxl111sf_write_reg(state,
					 V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
					 tmp);
		mxl_fail(ret);
	}

	/* MPEG Sync polarity */
	if (mpeg_sync_pol == TSIF_NORMAL)
		mode &= ~V6_INVERTED_MPEG_SYNC;
	else
		mode |= V6_INVERTED_MPEG_SYNC;

	/* MPEG Valid polarity */
	if (mpeg_valid_pol == 0)
		mode &= ~V6_INVERTED_MPEG_VALID;
	else
		mode |= V6_INVERTED_MPEG_VALID;

	ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode);
	mxl_fail(ret);

	return ret;
}

int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size)
{
	static struct mxl111sf_reg_ctrl_info init_i2s[] = {
		{0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */
		{0x15, 0x60, 0x60}, /* Enable I2S */
		{0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB,
				       Inverted 656 Clock, I2S_SOFT_RESET,
				       0 : Normal operation, 1 : Reset State */
#if 0
		{0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */
#endif
		{0x00, 0xff, 0x02}, /* Change to Control Page */
		{0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */
		{0x00, 0xff, 0x00},
		{0,    0,    0}
	};
	int ret;

	mxl_debug("(0x%02x)", sample_size);

	ret = mxl111sf_ctrl_program_regs(state, init_i2s);
	if (mxl_fail(ret))
		goto fail;

	ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size);
	mxl_fail(ret);
fail:
	return ret;
}

int mxl111sf_disable_i2s_port(struct mxl111sf_state *state)
{
	static struct mxl111sf_reg_ctrl_info disable_i2s[] = {
		{0x15, 0x40, 0x00},
		{0,    0,    0}
	};

	mxl_debug("()");

	return mxl111sf_ctrl_program_regs(state, disable_i2s);
}

int mxl111sf_config_i2s(struct mxl111sf_state *state,
			u8 msb_start_pos, u8 data_width)
{
	int ret;
	u8 tmp;

	mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width);

	ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp);
	if (mxl_fail(ret))
		goto fail;

	tmp &= 0xe0;
	tmp |= msb_start_pos;
	ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp);
	if (mxl_fail(ret))
		goto fail;

	ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp);
	if (mxl_fail(ret))
		goto fail;

	tmp &= 0xe0;
	tmp |= data_width;
	ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp);
	mxl_fail(ret);
fail:
	return ret;
}

int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff)
{
	u8 val;
	int ret;

	mxl_debug("(%d)", onoff);

	ret = mxl111sf_write_reg(state, 0x00, 0x02);
	if (mxl_fail(ret))
		goto fail;

	ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val);
	if (mxl_fail(ret))
		goto fail;

	if (onoff)
		val |= 0x04;
	else
		val &= ~0x04;

	ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val);
	if (mxl_fail(ret))
		goto fail;

	ret = mxl111sf_write_reg(state, 0x00, 0x00);
	mxl_fail(ret);
fail:
	return ret;
}

int mxl111sf_idac_config(struct mxl111sf_state *state,
			 u8 control_mode, u8 current_setting,
			 u8 current_value, u8 hysteresis_value)
{
	int ret;
	u8 val;
	/* current value will be set for both automatic & manual IDAC control */
	val = current_value;

	if (control_mode == IDAC_MANUAL_CONTROL) {
		/* enable manual control of IDAC */
		val |= IDAC_MANUAL_CONTROL_BIT_MASK;

		if (current_setting == IDAC_CURRENT_SINKING_ENABLE)
			/* enable current sinking in manual mode */
			val |= IDAC_CURRENT_SINKING_BIT_MASK;
		else
			/* disable current sinking in manual mode */
			val &= ~IDAC_CURRENT_SINKING_BIT_MASK;
	} else {
		/* disable manual control of IDAC */
		val &= ~IDAC_MANUAL_CONTROL_BIT_MASK;

		/* set hysteresis value  reg: 0x0B<5:0> */
		ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
					 (hysteresis_value & 0x3F));
		mxl_fail(ret);
	}

	ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
	mxl_fail(ret);

	return ret;
}

/*
 * Local variables:
 * c-basic-offset: 8
 * End:
 */