aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/include/asm/sgi/ioc.h
blob: 380347b648e2fdda38239a6a1152e73ba876bdc4 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License. See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * ioc.h: Definitions for SGI I/O Controller
 *
 * Copyright (C) 1996 David S. Miller
 * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
 * Copyright (C) 2001, 2003 Ladislav Michl
 */

#ifndef _SGI_IOC_H
#define _SGI_IOC_H

#include <linux/types.h>
#include <asm/sgi/pi1.h>

/*
 * All registers are 8-bit wide aligned on 32-bit boundary. Bad things
 * happen if you try word access them. You have been warned.
 */

struct sgioc_uart_regs {
	u8 _ctrl1[3];
	volatile u8 ctrl1;
	u8 _data1[3];
	volatile u8 data1;
	u8 _ctrl2[3];
	volatile u8 ctrl2;
	u8 _data2[3];
	volatile u8 data2;
};

struct sgioc_keyb_regs {
	u8 _data[3];
	volatile u8 data;
	u8 _command[3];
	volatile u8 command;
};

struct sgint_regs {
	u8 _istat0[3];
	volatile u8 istat0;		/* Interrupt status zero */
#define SGINT_ISTAT0_FFULL	0x01
#define SGINT_ISTAT0_SCSI0	0x02
#define SGINT_ISTAT0_SCSI1	0x04
#define SGINT_ISTAT0_ENET	0x08
#define SGINT_ISTAT0_GFXDMA	0x10
#define SGINT_ISTAT0_PPORT	0x20
#define SGINT_ISTAT0_HPC2	0x40
#define SGINT_ISTAT0_LIO2	0x80
	u8 _imask0[3];
	volatile u8 imask0;		/* Interrupt mask zero */
	u8 _istat1[3];
	volatile u8 istat1;		/* Interrupt status one */
#define SGINT_ISTAT1_ISDNI	0x01
#define SGINT_ISTAT1_PWR	0x02
#define SGINT_ISTAT1_ISDNH	0x04
#define SGINT_ISTAT1_LIO3	0x08
#define SGINT_ISTAT1_HPC3	0x10
#define SGINT_ISTAT1_AFAIL	0x20
#define SGINT_ISTAT1_VIDEO	0x40
#define SGINT_ISTAT1_GIO2	0x80
	u8 _imask1[3];
	volatile u8 imask1;		/* Interrupt mask one */
	u8 _vmeistat[3];
	volatile u8 vmeistat;		/* VME interrupt status */
	u8 _cmeimask0[3];
	volatile u8 cmeimask0;		/* VME interrupt mask zero */
	u8 _cmeimask1[3];
	volatile u8 cmeimask1;		/* VME interrupt mask one */
	u8 _cmepol[3];
	volatile u8 cmepol;		/* VME polarity */
	u8 _tclear[3];
	volatile u8 tclear;
	u8 _errstat[3];
	volatile u8 errstat;	/* Error status reg, reserved on INT2 */
	u32 _unused0[2];
	u8 _tcnt0[3];
	volatile u8 tcnt0;		/* counter 0 */
	u8 _tcnt1[3];
	volatile u8 tcnt1;		/* counter 1 */
	u8 _tcnt2[3];
	volatile u8 tcnt2;		/* counter 2 */
	u8 _tcword[3];
	volatile u8 tcword;		/* control word */
#define SGINT_TCWORD_BCD	0x01	/* Use BCD mode for counters */
#define SGINT_TCWORD_MMASK	0x0e	/* Mode bitmask. */
#define SGINT_TCWORD_MITC	0x00	/* IRQ on terminal count (doesn't work) */
#define SGINT_TCWORD_MOS	0x02	/* One-shot IRQ mode. */
#define SGINT_TCWORD_MRGEN	0x04	/* Normal rate generation */
#define SGINT_TCWORD_MSWGEN	0x06	/* Square wave generator mode */
#define SGINT_TCWORD_MSWST	0x08	/* Software strobe */
#define SGINT_TCWORD_MHWST	0x0a	/* Hardware strobe */
#define SGINT_TCWORD_CMASK	0x30	/* Command mask */
#define SGINT_TCWORD_CLAT	0x00	/* Latch command */
#define SGINT_TCWORD_CLSB	0x10	/* LSB read/write */
#define SGINT_TCWORD_CMSB	0x20	/* MSB read/write */
#define SGINT_TCWORD_CALL	0x30	/* Full counter read/write */
#define SGINT_TCWORD_CNT0	0x00	/* Select counter zero */
#define SGINT_TCWORD_CNT1	0x40	/* Select counter one */
#define SGINT_TCWORD_CNT2	0x80	/* Select counter two */
#define SGINT_TCWORD_CRBCK	0xc0	/* Readback command */
};

/*
 * The timer is the good old 8254.  Unlike in PCs it's clocked at exactly 1MHz
 */
#define SGINT_TIMER_CLOCK	1000000

/*
 * This is the constant we're using for calibrating the counter.
 */
#define SGINT_TCSAMP_COUNTER	((SGINT_TIMER_CLOCK / HZ) + 255)

/* We need software copies of these because they are write only. */
extern u8 sgi_ioc_reset, sgi_ioc_write;

struct sgioc_regs {
	struct pi1_regs pport;
	u32 _unused0[2];
	struct sgioc_uart_regs uart;
	struct sgioc_keyb_regs kbdmouse;
	u8 _gcsel[3];
	volatile u8 gcsel;
	u8 _genctrl[3];
	volatile u8 genctrl;
	u8 _panel[3];
	volatile u8 panel;
#define SGIOC_PANEL_POWERON	0x01
#define SGIOC_PANEL_POWERINTR	0x02
#define SGIOC_PANEL_VOLDNINTR	0x10
#define SGIOC_PANEL_VOLDNHOLD	0x20
#define SGIOC_PANEL_VOLUPINTR	0x40
#define SGIOC_PANEL_VOLUPHOLD	0x80
	u32 _unused1;
	u8 _sysid[3];
	volatile u8 sysid;
#define SGIOC_SYSID_FULLHOUSE	0x01
#define SGIOC_SYSID_BOARDREV(x)	(((x) & 0x1e) >> 1)
#define SGIOC_SYSID_CHIPREV(x)	(((x) & 0xe0) >> 5)
	u32 _unused2;
	u8 _read[3];
	volatile u8 read;
	u32 _unused3;
	u8 _dmasel[3];
	volatile u8 dmasel;
#define SGIOC_DMASEL_SCLK10MHZ	0x00	/* use 10MHZ serial clock */
#define SGIOC_DMASEL_ISDNB	0x01	/* enable isdn B */
#define SGIOC_DMASEL_ISDNA	0x02	/* enable isdn A */
#define SGIOC_DMASEL_PPORT	0x04	/* use parallel DMA */
#define SGIOC_DMASEL_SCLK667MHZ	0x10	/* use 6.67MHZ serial clock */
#define SGIOC_DMASEL_SCLKEXT	0x20	/* use external serial clock */
	u32 _unused4;
	u8 _reset[3];
	volatile u8 reset;
#define SGIOC_RESET_PPORT	0x01	/* 0=parport reset, 1=nornal */
#define SGIOC_RESET_KBDMOUSE	0x02	/* 0=kbdmouse reset, 1=normal */
#define SGIOC_RESET_EISA	0x04	/* 0=eisa reset, 1=normal */
#define SGIOC_RESET_ISDN	0x08	/* 0=isdn reset, 1=normal */
#define SGIOC_RESET_LC0OFF	0x10	/* guiness: turn led off (red, else green) */
#define SGIOC_RESET_LC1OFF	0x20	/* guiness: turn led off (green, else amber) */
	u32 _unused5;
	u8 _write[3];
	volatile u8 write;
#define SGIOC_WRITE_NTHRESH	0x01	/* use 4.5db threshold */
#define SGIOC_WRITE_TPSPEED	0x02	/* use 100ohm TP speed */
#define SGIOC_WRITE_EPSEL	0x04	/* force cable mode: 1=AUI 0=TP */
#define SGIOC_WRITE_EASEL	0x08	/* 1=autoselect 0=manual cable selection */
#define SGIOC_WRITE_U1AMODE	0x10	/* 1=PC 0=MAC UART mode */
#define SGIOC_WRITE_U0AMODE	0x20	/* 1=PC 0=MAC UART mode */
#define SGIOC_WRITE_MLO		0x40	/* 1=4.75V 0=+5V */
#define SGIOC_WRITE_MHI		0x80	/* 1=5.25V 0=+5V */
	u32 _unused6;
	struct sgint_regs int3;
	u32 _unused7[16];
	volatile u32 extio;		/* FullHouse only */
#define EXTIO_S0_IRQ_3		0x8000	/* S0: vid.vsync */
#define EXTIO_S0_IRQ_2		0x4000	/* S0: gfx.fifofull */
#define EXTIO_S0_IRQ_1		0x2000	/* S0: gfx.int */
#define EXTIO_S0_RETRACE	0x1000
#define EXTIO_SG_IRQ_3		0x0800	/* SG: vid.vsync */
#define EXTIO_SG_IRQ_2		0x0400	/* SG: gfx.fifofull */
#define EXTIO_SG_IRQ_1		0x0200	/* SG: gfx.int */
#define EXTIO_SG_RETRACE	0x0100
#define EXTIO_GIO_33MHZ		0x0080
#define EXTIO_EISA_BUSERR	0x0040
#define EXTIO_MC_BUSERR		0x0020
#define EXTIO_HPC3_BUSERR	0x0010
#define EXTIO_S0_STAT_1		0x0008
#define EXTIO_S0_STAT_0		0x0004
#define EXTIO_SG_STAT_1		0x0002
#define EXTIO_SG_STAT_0		0x0001
};

extern struct sgioc_regs *sgioc;
extern struct sgint_regs *sgint;

#endif