1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
|
/*
* This file configures the internal USB PHY in OMAP4430. Used
* with TWL6030 transceiver and MUSB on OMAP4430.
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Author: Hema HK <hemahk@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/usb.h>
#include <plat/usb.h>
#include "control.h"
/* OMAP control module register for UTMI PHY */
#define CONTROL_DEV_CONF 0x300
#define PHY_PD 0x1
#define USBOTGHS_CONTROL 0x33c
#define AVALID BIT(0)
#define BVALID BIT(1)
#define VBUSVALID BIT(2)
#define SESSEND BIT(3)
#define IDDIG BIT(4)
static struct clk *phyclk, *clk48m, *clk32k;
static void __iomem *ctrl_base;
static int usbotghs_control;
int omap4430_phy_init(struct device *dev)
{
ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
if (!ctrl_base) {
dev_err(dev, "control module ioremap failed\n");
return -ENOMEM;
}
/* Power down the phy */
__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
if (IS_ERR(phyclk)) {
dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n");
iounmap(ctrl_base);
return PTR_ERR(phyclk);
}
clk48m = clk_get(dev, "ocp2scp_usb_phy_phy_48m");
if (IS_ERR(clk48m)) {
dev_err(dev, "cannot clk_get ocp2scp_usb_phy_phy_48m\n");
clk_put(phyclk);
iounmap(ctrl_base);
return PTR_ERR(clk48m);
}
clk32k = clk_get(dev, "usb_phy_cm_clk32k");
if (IS_ERR(clk32k)) {
dev_err(dev, "cannot clk_get usb_phy_cm_clk32k\n");
clk_put(phyclk);
clk_put(clk48m);
iounmap(ctrl_base);
return PTR_ERR(clk32k);
}
return 0;
}
int omap4430_phy_set_clk(struct device *dev, int on)
{
static int state;
if (on && !state) {
/* Enable the phy clocks */
clk_enable(phyclk);
clk_enable(clk48m);
clk_enable(clk32k);
state = 1;
} else if (state) {
/* Disable the phy clocks */
clk_disable(phyclk);
clk_disable(clk48m);
clk_disable(clk32k);
state = 0;
}
return 0;
}
int omap4430_phy_power(struct device *dev, int ID, int on)
{
if (on) {
if (ID)
/* enable VBUS valid, IDDIG groung */
__raw_writel(AVALID | VBUSVALID, ctrl_base +
USBOTGHS_CONTROL);
else
/*
* Enable VBUS Valid, AValid and IDDIG
* high impedence
*/
__raw_writel(IDDIG | AVALID | VBUSVALID,
ctrl_base + USBOTGHS_CONTROL);
} else {
/* Enable session END and IDIG to high impedence. */
__raw_writel(SESSEND | IDDIG, ctrl_base +
USBOTGHS_CONTROL);
}
return 0;
}
int omap4430_phy_suspend(struct device *dev, int suspend)
{
if (suspend) {
/* Disable the clocks */
omap4430_phy_set_clk(dev, 0);
/* Power down the phy */
__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
/* save the context */
usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL);
} else {
/* Enable the internel phy clcoks */
omap4430_phy_set_clk(dev, 1);
/* power on the phy */
if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
__raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
mdelay(200);
}
/* restore the context */
__raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL);
}
return 0;
}
int omap4430_phy_exit(struct device *dev)
{
if (ctrl_base)
iounmap(ctrl_base);
if (phyclk)
clk_put(phyclk);
if (clk48m)
clk_put(clk48m);
if (clk32k)
clk_put(clk32k);
return 0;
}
void am35x_musb_reset(void)
{
u32 regval;
/* Reset the musb interface */
regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
regval |= AM35XX_USBOTGSS_SW_RST;
omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
regval &= ~AM35XX_USBOTGSS_SW_RST;
omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
}
void am35x_musb_phy_power(u8 on)
{
unsigned long timeout = jiffies + msecs_to_jiffies(100);
u32 devconf2;
if (on) {
/*
* Start the on-chip PHY and its PLL.
*/
devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
devconf2 |= CONF2_PHY_PLLON;
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
pr_info(KERN_INFO "Waiting for PHY clock good...\n");
while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
& CONF2_PHYCLKGD)) {
cpu_relax();
if (time_after(jiffies, timeout)) {
pr_err(KERN_ERR "musb PHY clock good timed out\n");
break;
}
}
} else {
/*
* Power down the on-chip PHY.
*/
devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
devconf2 &= ~CONF2_PHY_PLLON;
devconf2 |= CONF2_PHYPWRDN | CONF2_OTGPWRDN;
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
}
}
void am35x_musb_clear_irq(void)
{
u32 regval;
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
regval |= AM35XX_USBOTGSS_INT_CLR;
omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
}
void am35x_musb_set_mode(u8 musb_mode)
{
u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
devconf2 &= ~CONF2_OTGMODE;
switch (musb_mode) {
#ifdef CONFIG_USB_MUSB_HDRC_HCD
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
devconf2 |= CONF2_FORCE_HOST;
break;
#endif
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
devconf2 |= CONF2_FORCE_DEVICE;
break;
#endif
#ifdef CONFIG_USB_MUSB_OTG
case MUSB_OTG: /* Don't override the VBUS/ID comparators */
devconf2 |= CONF2_NO_OVERRIDE;
break;
#endif
default:
pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
}
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
}
|
