/* * Copyright (c) by Jaroslav Kysela * Creative Labs, Inc. * Routines for control of EMU10K1 chips * * Copyright (c) by James Courtier-Dutton * Added support for Audigy 2 Value. * * * BUGS: * -- * * TODO: * -- * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ #include #include #include #include #include #include #include #include #include #include "p16v.h" #if 0 MODULE_AUTHOR("Jaroslav Kysela , Creative Labs, Inc."); MODULE_DESCRIPTION("Routines for control of EMU10K1 chips"); MODULE_LICENSE("GPL"); #endif /************************************************************************* * EMU10K1 init / done *************************************************************************/ void snd_emu10k1_voice_init(emu10k1_t * emu, int ch) { snd_emu10k1_ptr_write(emu, DCYSUSV, ch, 0); snd_emu10k1_ptr_write(emu, IP, ch, 0); snd_emu10k1_ptr_write(emu, VTFT, ch, 0xffff); snd_emu10k1_ptr_write(emu, CVCF, ch, 0xffff); snd_emu10k1_ptr_write(emu, PTRX, ch, 0); snd_emu10k1_ptr_write(emu, CPF, ch, 0); snd_emu10k1_ptr_write(emu, CCR, ch, 0); snd_emu10k1_ptr_write(emu, PSST, ch, 0); snd_emu10k1_ptr_write(emu, DSL, ch, 0x10); snd_emu10k1_ptr_write(emu, CCCA, ch, 0); snd_emu10k1_ptr_write(emu, Z1, ch, 0); snd_emu10k1_ptr_write(emu, Z2, ch, 0); snd_emu10k1_ptr_write(emu, FXRT, ch, 0x32100000); snd_emu10k1_ptr_write(emu, ATKHLDM, ch, 0); snd_emu10k1_ptr_write(emu, DCYSUSM, ch, 0); snd_emu10k1_ptr_write(emu, IFATN, ch, 0xffff); snd_emu10k1_ptr_write(emu, PEFE, ch, 0); snd_emu10k1_ptr_write(emu, FMMOD, ch, 0); snd_emu10k1_ptr_write(emu, TREMFRQ, ch, 24); /* 1 Hz */ snd_emu10k1_ptr_write(emu, FM2FRQ2, ch, 24); /* 1 Hz */ snd_emu10k1_ptr_write(emu, TEMPENV, ch, 0); /*** these are last so OFF prevents writing ***/ snd_emu10k1_ptr_write(emu, LFOVAL2, ch, 0); snd_emu10k1_ptr_write(emu, LFOVAL1, ch, 0); snd_emu10k1_ptr_write(emu, ATKHLDV, ch, 0); snd_emu10k1_ptr_write(emu, ENVVOL, ch, 0); snd_emu10k1_ptr_write(emu, ENVVAL, ch, 0); /* Audigy extra stuffs */ if (emu->audigy) { snd_emu10k1_ptr_write(emu, 0x4c, ch, 0); /* ?? */ snd_emu10k1_ptr_write(emu, 0x4d, ch, 0); /* ?? */ snd_emu10k1_ptr_write(emu, 0x4e, ch, 0); /* ?? */ snd_emu10k1_ptr_write(emu, 0x4f, ch, 0); /* ?? */ snd_emu10k1_ptr_write(emu, A_FXRT1, ch, 0x03020100); snd_emu10k1_ptr_write(emu, A_FXRT2, ch, 0x3f3f3f3f); snd_emu10k1_ptr_write(emu, A_SENDAMOUNTS, ch, 0); } } static int __devinit snd_emu10k1_init(emu10k1_t * emu, int enable_ir) { int ch, idx, err; unsigned int silent_page; emu->fx8010.itram_size = (16 * 1024)/2; emu->fx8010.etram_pages.area = NULL; emu->fx8010.etram_pages.bytes = 0; /* disable audio and lock cache */ outl(HCFG_LOCKSOUNDCACHE | HCFG_LOCKTANKCACHE_MASK | HCFG_MUTEBUTTONENABLE, emu->port + HCFG); /* reset recording buffers */ snd_emu10k1_ptr_write(emu, MICBS, 0, ADCBS_BUFSIZE_NONE); snd_emu10k1_ptr_write(emu, MICBA, 0, 0); snd_emu10k1_ptr_write(emu, FXBS, 0, ADCBS_BUFSIZE_NONE); snd_emu10k1_ptr_write(emu, FXBA, 0, 0); snd_emu10k1_ptr_write(emu, ADCBS, 0, ADCBS_BUFSIZE_NONE); snd_emu10k1_ptr_write(emu, ADCBA, 0, 0); /* disable channel interrupt */ outl(0, emu->port + INTE); snd_emu10k1_ptr_write(emu, CLIEL, 0, 0); snd_emu10k1_ptr_write(emu, CLIEH, 0, 0); snd_emu10k1_ptr_write(emu, SOLEL, 0, 0); snd_emu10k1_ptr_write(emu, SOLEH, 0, 0); if (emu->audigy){ /* set SPDIF bypass mode */ snd_emu10k1_ptr_write(emu, SPBYPASS, 0, SPBYPASS_FORMAT); /* enable rear left + rear right AC97 slots */ snd_emu10k1_ptr_write(emu, AC97SLOT, 0, AC97SLOT_REAR_RIGHT | AC97SLOT_REAR_LEFT); } /* init envelope engine */ for (ch = 0; ch < NUM_G; ch++) { emu->voices[ch].emu = emu; emu->voices[ch].number = ch; snd_emu10k1_voice_init(emu, ch); } /* * Init to 0x02109204 : * Clock accuracy = 0 (1000ppm) * Sample Rate = 2 (48kHz) * Audio Channel = 1 (Left of 2) * Source Number = 0 (Unspecified) * Generation Status = 1 (Original for Cat Code 12) * Cat Code = 12 (Digital Signal Mixer) * Mode = 0 (Mode 0) * Emphasis = 0 (None) * CP = 1 (Copyright unasserted) * AN = 0 (Audio data) * P = 0 (Consumer) */ snd_emu10k1_ptr_write(emu, SPCS0, 0, emu->spdif_bits[0] = SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 | SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC | SPCS_GENERATIONSTATUS | 0x00001200 | 0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT); snd_emu10k1_ptr_write(emu, SPCS1, 0, emu->spdif_bits[1] = SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 | SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC | SPCS_GENERATIONSTATUS | 0x00001200 | 0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT); snd_emu10k1_ptr_write(emu, SPCS2, 0, emu->spdif_bits[2] = SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 | SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC | SPCS_GENERATIONSTATUS | 0x00001200 | 0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT); if (emu->card_capabilities->ca0151_chip) { /* audigy2 */ /* Hacks for Alice3 to work independent of haP16V driver */ u32 tmp; //Setup SRCMulti_I2S SamplingRate tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0); tmp &= 0xfffff1ff; tmp |= (0x2<<9); snd_emu10k1_ptr_write(emu, A_SPDIF_SAMPLERATE, 0, tmp); /* Setup SRCSel (Enable Spdif,I2S SRCMulti) */ snd_emu10k1_ptr20_write(emu, SRCSel, 0, 0x14); /* Setup SRCMulti Input Audio Enable */ /* Use 0xFFFFFFFF to enable P16V sounds. */ snd_emu10k1_ptr20_write(emu, SRCMULTI_ENABLE, 0, 0xFFFFFFFF); /* Enabled Phased (8-channel) P16V playback */ outl(0x0201, emu->port + HCFG2); /* Set playback routing. */ snd_emu10k1_ptr20_write(emu, CAPTURE_P16V_SOURCE, 0, 0x78e4); } if (emu->audigy && (emu->serial == 0x10011102) ) { /* audigy2 Value */ /* Hacks for Alice3 to work independent of haP16V driver */ u32 tmp; snd_printk(KERN_ERR "Audigy2 value:Special config.\n"); //Setup SRCMulti_I2S SamplingRate tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0); tmp &= 0xfffff1ff; tmp |= (0x2<<9); snd_emu10k1_ptr_write(emu, A_SPDIF_SAMPLERATE, 0, tmp); /* Setup SRCSel (Enable Spdif,I2S SRCMulti) */ outl(0x600000, emu->port + 0x20); outl(0x14, emu->port + 0x24); /* Setup SRCMulti Input Audio Enable */ outl(0x7b0000, emu->port + 0x20); outl(0xFF000000, emu->port + 0x24); /* Setup SPDIF Out Audio Enable */ /* The Audigy 2 Value has a separate SPDIF out, * so no need for a mixer switch */ outl(0x7a0000, emu->port + 0x20); outl(0xFF000000, emu->port + 0x24); tmp = inl(emu->port + A_IOCFG) & ~0x8; /* Clear bit 3 */ outl(tmp, emu->port + A_IOCFG); } /* * Clear page with silence & setup all pointers to this page */ memset(emu->silent_page.area, 0, PAGE_SIZE); silent_page = emu->silent_page.addr << 1; for (idx = 0; idx < MAXPAGES; idx++) ((u32 *)emu->ptb_pages.area)[idx] = cpu_to_le32(silent_page | idx); snd_emu10k1_ptr_write(emu, PTB, 0, emu->ptb_pages.addr); snd_emu10k1_ptr_write(emu, TCB, 0, 0); /* taken from original driver */ snd_emu10k1_ptr_write(emu, TCBS, 0, 4); /* taken from original driver */ silent_page = (emu->silent_page.addr << 1) | MAP_PTI_MASK; for (ch = 0; ch < NUM_G; ch++) { snd_emu10k1_ptr_write(emu, MAPA, ch, silent_page); snd_emu10k1_ptr_write(emu, MAPB, ch, silent_page); } /* * Hokay, setup HCFG * Mute Disable Audio = 0 * Lock Tank Memory = 1 * Lock Sound Memory = 0 * Auto Mute = 1 */ if (emu->audigy) { if (emu->revision == 4) /* audigy2 */ outl(HCFG_AUDIOENABLE | HCFG_AC3ENABLE_CDSPDIF | HCFG_AC3ENABLE_GPSPDIF | HCFG_AUTOMUTE | HCFG_JOYENABLE, emu->port + HCFG); else outl(HCFG_AUTOMUTE | HCFG_JOYENABLE, emu->port + HCFG); } else if (emu->model == 0x20 || emu->model == 0xc400 || (emu->model == 0x21 && emu->revision < 6)) outl(HCFG_LOCKTANKCACHE_MASK | HCFG_AUTOMUTE, emu->port + HCFG); else // With on-chip joystick outl(HCFG_LOCKTANKCACHE_MASK | HCFG_AUTOMUTE | HCFG_JOYENABLE, emu->port + HCFG); if (enable_ir) { /* enable IR for SB Live */ if (emu->audigy) { unsigned int reg = inl(emu->port + A_IOCFG); outl(reg | A_IOCFG_GPOUT2, emu->port + A_IOCFG); udelay(500); outl(reg | A_IOCFG_GPOUT1 | A_IOCFG_GPOUT2, emu->port + A_IOCFG); udelay(100); outl(reg, emu->port + A_IOCFG); } else { unsigned int reg = inl(emu->port + HCFG); outl(reg | HCFG_GPOUT2, emu->port + HCFG); udelay(500); outl(reg | HCFG_GPOUT1 | HCFG_GPOUT2, emu->port + HCFG); udelay(100); outl(reg, emu->port + HCFG); } } if (emu->audigy) { /* enable analog output */ unsigned int reg = inl(emu->port + A_IOCFG); outl(reg | A_IOCFG_GPOUT0, emu->port + A_IOCFG); } /* * Initialize the effect engine */ if ((err = snd_emu10k1_init_efx(emu)) < 0) return err; /* * Enable the audio bit */ outl(inl(emu->port + HCFG) | HCFG_AUDIOENABLE, emu->port + HCFG); /* Enable analog/digital outs on audigy */ if (emu->audigy) { outl(inl(emu->port + A_IOCFG) & ~0x44, emu->port + A_IOCFG); if (emu->revision == 4) { /* audigy2 */ /* Unmute Analog now. Set GPO6 to 1 for Apollo. * This has to be done after init ALice3 I2SOut beyond 48KHz. * So, sequence is important. */ outl(inl(emu->port + A_IOCFG) | 0x0040, emu->port + A_IOCFG); } else if (emu->serial == 0x10011102) { /* audigy2 value */ /* Unmute Analog now. */ outl(inl(emu->port + A_IOCFG) | 0x0060, emu->port + A_IOCFG); } else { /* Disable routing from AC97 line out to Front speakers */ outl(inl(emu->port + A_IOCFG) | 0x0080, emu->port + A_IOCFG); } } #if 0 { unsigned int tmp; /* FIXME: the following routine disables LiveDrive-II !! */ // TOSLink detection emu->tos_link = 0; tmp = inl(emu->port + HCFG); if (tmp & (HCFG_GPINPUT0 | HCFG_GPINPUT1)) { outl(tmp|0x800, emu->port + HCFG); udelay(50); if (tmp != (inl(emu->port + HCFG) & ~0x800)) { emu->tos_link = 1; outl(tmp, emu->port + HCFG); } } } #endif snd_emu10k1_intr_enable(emu, INTE_PCIERRORENABLE); emu->reserved_page = (emu10k1_memblk_t *)snd_emu10k1_synth_alloc(emu, 4096); if (emu->reserved_page) emu->reserved_page->map_locked = 1; return 0; } static int snd_emu10k1_done(emu10k1_t * emu) { int ch; outl(0, emu->port + INTE); /* * Shutdown the chip */ for (ch = 0; ch < NUM_G; ch++) snd_emu10k1_ptr_write(emu, DCYSUSV, ch, 0); for (ch = 0; ch < NUM_G; ch++) { snd_emu10k1_ptr_write(emu, VTFT, ch, 0); snd_emu10k1_ptr_write(emu, CVCF, ch, 0); snd_emu10k1_ptr_write(emu, PTRX, ch, 0); snd_emu10k1_ptr_write(emu, CPF, ch, 0); } /* reset recording buffers */ snd_emu10k1_ptr_write(emu, MICBS, 0, 0); snd_emu10k1_ptr_write(emu, MICBA, 0, 0); snd_emu10k1_ptr_write(emu, FXBS, 0, 0); snd_emu10k1_ptr_write(emu, FXBA, 0, 0); snd_emu10k1_ptr_write(emu, FXWC, 0, 0); snd_emu10k1_ptr_write(emu, ADCBS, 0, ADCBS_BUFSIZE_NONE); snd_emu10k1_ptr_write(emu, ADCBA, 0, 0); snd_emu10k1_ptr_write(emu, TCBS, 0, TCBS_BUFFSIZE_16K); snd_emu10k1_ptr_write(emu, TCB, 0, 0); if (emu->audigy) snd_emu10k1_ptr_write(emu, A_DBG, 0, A_DBG_SINGLE_STEP); else snd_emu10k1_ptr_write(emu, DBG, 0, EMU10K1_DBG_SINGLE_STEP); /* disable channel interrupt */ snd_emu10k1_ptr_write(emu, CLIEL, 0, 0); snd_emu10k1_ptr_write(emu, CLIEH, 0, 0); snd_emu10k1_ptr_write(emu, SOLEL, 0, 0); snd_emu10k1_ptr_write(emu, SOLEH, 0, 0); /* remove reserved page */ if (emu->reserved_page != NULL) { snd_emu10k1_synth_free(emu, (snd_util_memblk_t *)emu->reserved_page); emu->reserved_page = NULL; } /* disable audio and lock cache */ outl(HCFG_LOCKSOUNDCACHE | HCFG_LOCKTANKCACHE_MASK | HCFG_MUTEBUTTONENABLE, emu->port + HCFG); snd_emu10k1_ptr_write(emu, PTB, 0, 0); snd_emu10k1_free_efx(emu); return 0; } /************************************************************************* * ECARD functional implementation *************************************************************************/ /* In A1 Silicon, these bits are in the HC register */ #define HOOKN_BIT (1L << 12) #define HANDN_BIT (1L << 11) #define PULSEN_BIT (1L << 10) #define EC_GDI1 (1 << 13) #define EC_GDI0 (1 << 14) #define EC_NUM_CONTROL_BITS 20 #define EC_AC3_DATA_SELN 0x0001L #define EC_EE_DATA_SEL 0x0002L #define EC_EE_CNTRL_SELN 0x0004L #define EC_EECLK 0x0008L #define EC_EECS 0x0010L #define EC_EESDO 0x0020L #define EC_TRIM_CSN 0x0040L #define EC_TRIM_SCLK 0x0080L #define EC_TRIM_SDATA 0x0100L #define EC_TRIM_MUTEN 0x0200L #define EC_ADCCAL 0x0400L #define EC_ADCRSTN 0x0800L #define EC_DACCAL 0x1000L #define EC_DACMUTEN 0x2000L #define EC_LEDN 0x4000L #define EC_SPDIF0_SEL_SHIFT 15 #define EC_SPDIF1_SEL_SHIFT 17 #define EC_SPDIF0_SEL_MASK (0x3L << EC_SPDIF0_SEL_SHIFT) #define EC_SPDIF1_SEL_MASK (0x7L << EC_SPDIF1_SEL_SHIFT) #define EC_SPDIF0_SELECT(_x) (((_x) << EC_SPDIF0_SEL_SHIFT) & EC_SPDIF0_SEL_MASK) #define EC_SPDIF1_SELECT(_x) (((_x) << EC_SPDIF1_SEL_SHIFT) & EC_SPDIF1_SEL_MASK) #define EC_CURRENT_PROM_VERSION 0x01 /* Self-explanatory. This should * be incremented any time the EEPROM's * format is changed. */ #define EC_EEPROM_SIZE 0x40 /* ECARD EEPROM has 64 16-bit words */ /* Addresses for special values stored in to EEPROM */ #define EC_PROM_VERSION_ADDR 0x20 /* Address of the current prom version */ #define EC_BOARDREV0_ADDR 0x21 /* LSW of board rev */ #define EC_BOARDREV1_ADDR 0x22 /* MSW of board rev */ #define EC_LAST_PROMFILE_ADDR 0x2f #define EC_SERIALNUM_ADDR 0x30 /* First word of serial number. The * can be up to 30 characters in length * and is stored as a NULL-terminated * ASCII string. Any unused bytes must be * filled with zeros */ #define EC_CHECKSUM_ADDR 0x3f /* Location at which checksum is stored */ /* Most of this stuff is pretty self-evident. According to the hardware * dudes, we need to leave the ADCCAL bit low in order to avoid a DC * offset problem. Weird. */ #define EC_RAW_RUN_MODE (EC_DACMUTEN | EC_ADCRSTN | EC_TRIM_MUTEN | \ EC_TRIM_CSN) #define EC_DEFAULT_ADC_GAIN 0xC4C4 #define EC_DEFAULT_SPDIF0_SEL 0x0 #define EC_DEFAULT_SPDIF1_SEL 0x4 /************************************************************************** * @func Clock bits into the Ecard's control latch. The Ecard uses a * control latch will is loaded bit-serially by toggling the Modem control * lines from function 2 on the E8010. This function hides these details * and presents the illusion that we are actually writing to a distinct * register. */ static void snd_emu10k1_ecard_write(emu10k1_t * emu, unsigned int value) { unsigned short count; unsigned int data; unsigned long hc_port; unsigned int hc_value; hc_port = emu->port + HCFG; hc_value = inl(hc_port) & ~(HOOKN_BIT | HANDN_BIT | PULSEN_BIT); outl(hc_value, hc_port); for (count = 0; count < EC_NUM_CONTROL_BITS; count++) { /* Set up the value */ data = ((value & 0x1) ? PULSEN_BIT : 0); value >>= 1; outl(hc_value | data, hc_port); /* Clock the shift register */ outl(hc_value | data | HANDN_BIT, hc_port); outl(hc_value | data, hc_port); } /* Latch the bits */ outl(hc_value | HOOKN_BIT, hc_port); outl(hc_value, hc_port); } /************************************************************************** * @func Set the gain of the ECARD's CS3310 Trim/gain controller. The * trim value consists of a 16bit value which is composed of two * 8 bit gain/trim values, one for the left channel and one for the * right channel. The following table maps from the Gain/Attenuation * value in decibels into the corresponding bit pattern for a single * channel. */ static void snd_emu10k1_ecard_setadcgain(emu10k1_t * emu, unsigned short gain) { unsigned int bit; /* Enable writing to the TRIM registers */ snd_emu10k1_ecard_write(emu, emu->ecard_ctrl & ~EC_TRIM_CSN); /* Do it again to insure that we meet hold time requirements */ snd_emu10k1_ecard_write(emu, emu->ecard_ctrl & ~EC_TRIM_CSN); for (bit = (1 << 15); bit; bit >>= 1) { unsigned int value; value = emu->ecard_ctrl & ~(EC_TRIM_CSN | EC_TRIM_SDATA); if (gain & bit) value |= EC_TRIM_SDATA; /* Clock the bit */ snd_emu10k1_ecard_write(emu, value); snd_emu10k1_ecard_write(emu, value | EC_TRIM_SCLK); snd_emu10k1_ecard_write(emu, value); } snd_emu10k1_ecard_write(emu, emu->ecard_ctrl); } static int __devinit snd_emu10k1_ecard_init(emu10k1_t * emu) { unsigned int hc_value; /* Set up the initial settings */ emu->ecard_ctrl = EC_RAW_RUN_MODE | EC_SPDIF0_SELECT(EC_DEFAULT_SPDIF0_SEL) | EC_SPDIF1_SELECT(EC_DEFAULT_SPDIF1_SEL); /* Step 0: Set the codec type in the hardware control register * and enable audio output */ hc_value = inl(emu->port + HCFG); outl(hc_value | HCFG_AUDIOENABLE | HCFG_CODECFORMAT_I2S, emu->port + HCFG); inl(emu->port + HCFG); /* Step 1: Turn off the led and deassert TRIM_CS */ snd_emu10k1_ecard_write(emu, EC_ADCCAL | EC_LEDN | EC_TRIM_CSN); /* Step 2: Calibrate the ADC and DAC */ snd_emu10k1_ecard_write(emu, EC_DACCAL | EC_LEDN | EC_TRIM_CSN); /* Step 3: Wait for awhile; XXX We can't get away with this * under a real operating system; we'll need to block and wait that * way. */ snd_emu10k1_wait(emu, 48000); /* Step 4: Switch off the DAC and ADC calibration. Note * That ADC_CAL is actually an inverted signal, so we assert * it here to stop calibration. */ snd_emu10k1_ecard_write(emu, EC_ADCCAL | EC_LEDN | EC_TRIM_CSN); /* Step 4: Switch into run mode */ snd_emu10k1_ecard_write(emu, emu->ecard_ctrl); /* Step 5: Set the analog input gain */ snd_emu10k1_ecard_setadcgain(emu, EC_DEFAULT_ADC_GAIN); return 0; } /* * Create the EMU10K1 instance */ static int snd_emu10k1_free(emu10k1_t *emu) { if (emu->port) { /* avoid access to already used hardware */ snd_emu10k1_fx8010_tram_setup(emu, 0); snd_emu10k1_done(emu); } if (emu->memhdr) snd_util_memhdr_free(emu->memhdr); if (emu->silent_page.area) snd_dma_free_pages(&emu->silent_page); if (emu->ptb_pages.area) snd_dma_free_pages(&emu->ptb_pages); vfree(emu->page_ptr_table); vfree(emu->page_addr_table); if (emu->irq >= 0) free_irq(emu->irq, (void *)emu); if (emu->port) pci_release_regions(emu->pci); pci_disable_device(emu->pci); if (emu->card_capabilities->ca0151_chip) /* P16V */ snd_p16v_free(emu); kfree(emu); return 0; } static int snd_emu10k1_dev_free(snd_device_t *device) { emu10k1_t *emu = device->device_data; return snd_emu10k1_free(emu); } static emu_chip_details_t emu_chip_details[] = { /* Audigy 2 Value AC3 out does not work yet. Need to find out how to turn off interpolators.*/ {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10011102, .driver = "Audigy2", .name = "Audigy 2 Value [SB0400]", .id = "Audigy2", .emu10k2_chip = 1, .ca0108_chip = 1, .spk71 = 1, .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0008, .driver = "Audigy2", .name = "Audigy 2 Value [Unknown]", .id = "Audigy2", .emu10k2_chip = 1, .ca0108_chip = 1, .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20071102, .driver = "Audigy2", .name = "Audigy 4 PRO [SB0380]", .id = "Audigy2", .emu10k2_chip = 1, .ca0102_chip = 1, .ca0151_chip = 1, .spk71 = 1, .spdif_bug = 1, .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20021102, .driver = "Audigy2", .name = "Audigy 2 ZS [SB0350]", .id = "Audigy2", .emu10k2_chip = 1, .ca0102_chip = 1, .ca0151_chip = 1, .spk71 = 1, .spdif_bug = 1, .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20011102, .driver = "Audigy2", .name = "Audigy 2 ZS [2001]", .id = "Audigy2", .emu10k2_chip = 1, .ca0102_chip = 1, .ca0151_chip = 1, .spk71 = 1, .spdif_bug = 1, .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10071102, .driver = "Audigy2", .name = "Audigy 2 [SB0240]", .id = "Audigy2", .emu10k2_chip = 1, .ca0102_chip = 1, .ca0151_chip = 1, .spk71 = 1, .spdif_bug = 1, .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10051102, .driver = "Audigy2", .name = "Audigy 2 EX [1005]", .id = "Audigy2", .emu10k2_chip = 1, .ca0102_chip = 1, .ca0151_chip = 1, .spdif_bug = 1} , {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10021102, .driver = "Audigy2", .name = "Audigy 2 Platinum [SB0240P]", .id = "Audigy2", .emu10k2_chip = 1, .ca0102_chip = 1, .ca0151_chip = 1, .spk71 = 1, .spdif_bug = 1, .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0004, .revision = 0x04, .driver = "Audigy2", .name = "Audigy 2 [Unknown]", .id = "Audigy2", .emu10k2_chip = 1, .ca0102_chip = 1, .ca0151_chip = 1, .spdif_bug = 1, .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10020052, .driver = "Audigy", .name = "Audigy 1 ES [SB0160]", .id = "Audigy", .emu10k2_chip = 1, .ca0102_chip = 1, .spdif_bug = 1, .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00531102, .driver = "Audigy", .name = "Audigy 1 [SB0090]", .id = "Audigy", .emu10k2_chip = 1, .ca0102_chip = 1, .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00511102, .driver = "Audigy", .name = "Audigy 1 [SB0090]", .id = "Audigy", .emu10k2_chip = 1, .ca0102_chip = 1, .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0004, .driver = "Audigy", .name = "Audigy 1 [Unknown]", .id = "Audigy", .emu10k2_chip = 1, .ca0102_chip = 1, .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x40011102, .driver = "EMU10K1", .name = "E-mu APS [4001]", .id = "APS", .emu10k1_chip = 1, .ecard = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80611102, .driver = "EMU10K1", .name = "SBLive! Player 5.1 [SB0060]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80641102, .driver = "EMU10K1", .name = "SB Live 5.1", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80401102, .driver = "EMU10K1", .name = "SBLive! Platinum [CT4760P]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x00211102, .driver = "EMU10K1", .name = "SBLive! [CT4620]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x00201102, .driver = "EMU10K1", .name = "SBLive! Value [CT4670]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80221102, .driver = "EMU10K1", .name = "SBLive! Value [CT4780]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80231102, .driver = "EMU10K1", .name = "SB PCI512 [CT4790]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80261102, .driver = "EMU10K1", .name = "SBLive! Value [CT4830]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80311102, .driver = "EMU10K1", .name = "SBLive! Value [CT4831]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102, .driver = "EMU10K1", .name = "SBLive! Value [CT4832]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80511102, .driver = "EMU10K1", .name = "SBLive! Value [CT4850]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80281102, .driver = "EMU10K1", .name = "SBLive! Value [CT4870]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80321102, .driver = "EMU10K1", .name = "SBLive! Value [CT4871]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80611102, .driver = "EMU10K1", .name = "SBLive! Value [SB0060]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80691102, .driver = "EMU10K1", .name = "SBLive! Value [SB0101]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x806A1102, .driver = "EMU10K1", .name = "SBLive! Value [SB0103]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x806B1102, .driver = "EMU10K1", .name = "SBLive! [SB0105]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .driver = "EMU10K1", .name = "SB Live [Unknown]", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , { } /* terminator */ }; int __devinit snd_emu10k1_create(snd_card_t * card, struct pci_dev * pci, unsigned short extin_mask, unsigned short extout_mask, long max_cache_bytes, int enable_ir, emu10k1_t ** remu) { emu10k1_t *emu; int err; int is_audigy; unsigned char revision; const emu_chip_details_t *c; static snd_device_ops_t ops = { .dev_free = snd_emu10k1_dev_free, }; *remu = NULL; /* enable PCI device */ if ((err = pci_enable_device(pci)) < 0) return err; emu = kcalloc(1, sizeof(*emu), GFP_KERNEL); if (emu == NULL) { pci_disable_device(pci); return -ENOMEM; } emu->card = card; spin_lock_init(&emu->reg_lock); spin_lock_init(&emu->emu_lock); spin_lock_init(&emu->voice_lock); spin_lock_init(&emu->synth_lock); spin_lock_init(&emu->memblk_lock); init_MUTEX(&emu->ptb_lock); init_MUTEX(&emu->fx8010.lock); INIT_LIST_HEAD(&emu->mapped_link_head); INIT_LIST_HEAD(&emu->mapped_order_link_head); emu->pci = pci; emu->irq = -1; emu->synth = NULL; emu->get_synth_voice = NULL; /* read revision & serial */ pci_read_config_byte(pci, PCI_REVISION_ID, &revision); emu->revision = revision; pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &emu->serial); pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &emu->model); snd_printdd("vendor=0x%x, device=0x%x, subsystem_vendor_id=0x%x, subsystem_id=0x%x\n",pci->vendor, pci->device, emu->serial, emu->model); for (c = emu_chip_details; c->vendor; c++) { if (c->vendor == pci->vendor && c->device == pci->device) { if (c->subsystem && c->subsystem != emu->serial) continue; if (c->revision && c->revision != emu->revision) continue; break; } } if (c->vendor == 0) { snd_printk(KERN_ERR "emu10k1: Card not recognised\n"); kfree(emu); pci_disable_device(pci); return -ENOENT; } emu->card_capabilities = c; if (c->subsystem != 0) snd_printdd("Sound card name=%s\n", c->name); else snd_printdd("Sound card name=%s, vendor=0x%x, device=0x%x, subsystem=0x%x\n", c->name, pci->vendor, pci->device, emu->serial); if (!*card->id && c->id) { int i, n = 0; strlcpy(card->id, c->id, sizeof(card->id)); for (;;) { for (i = 0; i < snd_ecards_limit; i++) { if (snd_cards[i] && !strcmp(snd_cards[i]->id, card->id)) break; } if (i >= snd_ecards_limit) break; n++; if (n >= SNDRV_CARDS) break; snprintf(card->id, sizeof(card->id), "%s_%d", c->id, n); } } is_audigy = emu->audigy = c->emu10k2_chip; /* set the DMA transfer mask */ emu->dma_mask = is_audigy ? AUDIGY_DMA_MASK : EMU10K1_DMA_MASK; if (pci_set_dma_mask(pci, emu->dma_mask) < 0 || pci_set_consistent_dma_mask(pci, emu->dma_mask) < 0) { snd_printk(KERN_ERR "architecture does not support PCI busmaster DMA with mask 0x%lx\n", emu->dma_mask); kfree(emu); pci_disable_device(pci); return -ENXIO; } if (is_audigy) emu->gpr_base = A_FXGPREGBASE; else emu->gpr_base = FXGPREGBASE; if ((err = pci_request_regions(pci, "EMU10K1")) < 0) { kfree(emu); pci_disable_device(pci); return err; } emu->port = pci_resource_start(pci, 0); if (request_irq(pci->irq, snd_emu10k1_interrupt, SA_INTERRUPT|SA_SHIRQ, "EMU10K1", (void *)emu)) { snd_emu10k1_free(emu); return -EBUSY; } emu->irq = pci->irq; emu->max_cache_pages = max_cache_bytes >> PAGE_SHIFT; if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci), 32 * 1024, &emu->ptb_pages) < 0) { snd_emu10k1_free(emu); return -ENOMEM; } emu->page_ptr_table = (void **)vmalloc(emu->max_cache_pages * sizeof(void*)); emu->page_addr_table = (unsigned long*)vmalloc(emu->max_cache_pages * sizeof(unsigned long)); if (emu->page_ptr_table == NULL || emu->page_addr_table == NULL) { snd_emu10k1_free(emu); return -ENOMEM; } if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci), EMUPAGESIZE, &emu->silent_page) < 0) { snd_emu10k1_free(emu); return -ENOMEM; } emu->memhdr = snd_util_memhdr_new(emu->max_cache_pages * PAGE_SIZE); if (emu->memhdr == NULL) { snd_emu10k1_free(emu); return -ENOMEM; } emu->memhdr->block_extra_size = sizeof(emu10k1_memblk_t) - sizeof(snd_util_memblk_t); pci_set_master(pci); emu->fx8010.fxbus_mask = 0x303f; if (extin_mask == 0) extin_mask = 0x3fcf; if (extout_mask == 0) extout_mask = 0x7fff; emu->fx8010.extin_mask = extin_mask; emu->fx8010.extout_mask = extout_mask; if (emu->card_capabilities->ecard) { if ((err = snd_emu10k1_ecard_init(emu)) < 0) { snd_emu10k1_free(emu); return err; } } else { /* 5.1: Enable the additional AC97 Slots. If the emu10k1 version does not support this, it shouldn't do any harm */ snd_emu10k1_ptr_write(emu, AC97SLOT, 0, AC97SLOT_CNTR|AC97SLOT_LFE); } if ((err = snd_emu10k1_init(emu, enable_ir)) < 0) { snd_emu10k1_free(emu); return err; } if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, emu, &ops)) < 0) { snd_emu10k1_free(emu); return err; } snd_emu10k1_proc_init(emu); snd_card_set_dev(card, &pci->dev); *remu = emu; return 0; } /* memory.c */ EXPORT_SYMBOL(snd_emu10k1_synth_alloc); EXPORT_SYMBOL(snd_emu10k1_synth_free); EXPORT_SYMBOL(snd_emu10k1_synth_bzero); EXPORT_SYMBOL(snd_emu10k1_synth_copy_from_user); EXPORT_SYMBOL(snd_emu10k1_memblk_map); /* voice.c */ EXPORT_SYMBOL(snd_emu10k1_voice_alloc); EXPORT_SYMBOL(snd_emu10k1_voice_free); /* io.c */ EXPORT_SYMBOL(snd_emu10k1_ptr_read); EXPORT_SYMBOL(snd_emu10k1_ptr_write);