/********************************************************************* * * Filename: irlan_eth.c * Version: * Description: * Status: Experimental. * Author: Dag Brattli * Created at: Thu Oct 15 08:37:58 1998 * Modified at: Tue Mar 21 09:06:41 2000 * Modified by: Dag Brattli * Sources: skeleton.c by Donald Becker * slip.c by Laurence Culhane, * Fred N. van Kempen, * * Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * Neither Dag Brattli nor University of Tromsø admit liability nor * provide warranty for any of this software. This material is * provided "AS-IS" and at no charge. * ********************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include static int irlan_eth_open(struct net_device *dev); static int irlan_eth_close(struct net_device *dev); static netdev_tx_t irlan_eth_xmit(struct sk_buff *skb, struct net_device *dev); static void irlan_eth_set_multicast_list( struct net_device *dev); static const struct net_device_ops irlan_eth_netdev_ops = { .ndo_open = irlan_eth_open, .ndo_stop = irlan_eth_close, .ndo_start_xmit = irlan_eth_xmit, .ndo_set_rx_mode = irlan_eth_set_multicast_list, .ndo_change_mtu = eth_change_mtu, .ndo_validate_addr = eth_validate_addr, }; /* * Function irlan_eth_setup (dev) * * The network device initialization function. * */ static void irlan_eth_setup(struct net_device *dev) { ether_setup(dev); dev->netdev_ops = &irlan_eth_netdev_ops; dev->destructor = free_netdev; /* * Lets do all queueing in IrTTP instead of this device driver. * Queueing here as well can introduce some strange latency * problems, which we will avoid by setting the queue size to 0. */ /* * The bugs in IrTTP and IrLAN that created this latency issue * have now been fixed, and we can propagate flow control properly * to the network layer. However, this requires a minimal queue of * packets for the device. * Without flow control, the Tx Queue is 14 (ttp) + 0 (dev) = 14 * With flow control, the Tx Queue is 7 (ttp) + 4 (dev) = 11 * See irlan_eth_flow_indication()... * Note : this number was randomly selected and would need to * be adjusted. * Jean II */ dev->tx_queue_len = 4; } /* * Function alloc_irlandev * * Allocate network device and control block * */ struct net_device *alloc_irlandev(const char *name) { return alloc_netdev(sizeof(struct irlan_cb), name, irlan_eth_setup); } /* * Function irlan_eth_open (dev) * * Network device has been opened by user * */ static int irlan_eth_open(struct net_device *dev) { struct irlan_cb *self = netdev_priv(dev); IRDA_DEBUG(2, "%s()\n", __func__ ); /* Ready to play! */ netif_stop_queue(dev); /* Wait until data link is ready */ /* We are now open, so time to do some work */ self->disconnect_reason = 0; irlan_client_wakeup(self, self->saddr, self->daddr); /* Make sure we have a hardware address before we return, so DHCP clients gets happy */ return wait_event_interruptible(self->open_wait, !self->tsap_data->connected); } /* * Function irlan_eth_close (dev) * * Stop the ether network device, his function will usually be called by * ifconfig down. We should now disconnect the link, We start the * close timer, so that the instance will be removed if we are unable * to discover the remote device after the disconnect. */ static int irlan_eth_close(struct net_device *dev) { struct irlan_cb *self = netdev_priv(dev); IRDA_DEBUG(2, "%s()\n", __func__ ); /* Stop device */ netif_stop_queue(dev); irlan_close_data_channel(self); irlan_close_tsaps(self); irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL); irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL); /* Remove frames queued on the control channel */ skb_queue_purge(&self->client.txq); self->client.tx_busy = 0; return 0; } /* * Function irlan_eth_tx (skb) * * Transmits ethernet frames over IrDA link. * */ static netdev_tx_t irlan_eth_xmit(struct sk_buff *skb, struct net_device *dev) { struct irlan_cb *self = netdev_priv(dev); int ret; unsigned int len; /* skb headroom large enough to contain all IrDA-headers? */ if ((skb_headroom(skb) < self->max_header_size) || (skb_shared(skb))) { struct sk_buff *new_skb = skb_realloc_headroom(skb, self->max_header_size); /* We have to free the original skb anyway */ dev_kfree_skb(skb); /* Did the realloc succeed? */ if (new_skb == NULL) return NETDEV_TX_OK; /* Use the new skb instead */ skb = new_skb; } dev->trans_start = jiffies; len = skb->len; /* Now queue the packet in the transport layer */ if (self->use_udata) ret = irttp_udata_request(self->tsap_data, skb); else ret = irttp_data_request(self->tsap_data, skb); if (ret < 0) { /* * IrTTPs tx queue is full, so we just have to * drop the frame! You might think that we should * just return -1 and don't deallocate the frame, * but that is dangerous since it's possible that * we have replaced the original skb with a new * one with larger headroom, and that would really * confuse do_dev_queue_xmit() in dev.c! I have * tried :-) DB */ /* irttp_data_request already free the packet */ dev->stats.tx_dropped++; } else { dev->stats.tx_packets++; dev->stats.tx_bytes += len; } return NETDEV_TX_OK; } /* * Function irlan_eth_receive (handle, skb) * * This function gets the data that is received on the data channel * */ int irlan_eth_receive(void *instance, void *sap, struct sk_buff *skb) { struct irlan_cb *self = instance; struct net_device *dev = self->dev; if (skb == NULL) { dev->stats.rx_dropped++; return 0; } if (skb->len < ETH_HLEN) { IRDA_DEBUG(0, "%s() : IrLAN frame too short (%d)\n", __func__, skb->len); dev->stats.rx_dropped++; dev_kfree_skb(skb); return 0; } /* * Adopt this frame! Important to set all these fields since they * might have been previously set by the low level IrDA network * device driver */ skb->protocol = eth_type_trans(skb, dev); /* Remove eth header */ dev->stats.rx_packets++; dev->stats.rx_bytes += skb->len; netif_rx(skb); /* Eat it! */ return 0; } /* * Function irlan_eth_flow (status) * * Do flow control between IP/Ethernet and IrLAN/IrTTP. This is done by * controlling the queue stop/start. * * The IrDA link layer has the advantage to have flow control, and * IrTTP now properly handles that. Flow controlling the higher layers * prevent us to drop Tx packets in here (up to 15% for a TCP socket, * more for UDP socket). * Also, this allow us to reduce the overall transmit queue, which means * less latency in case of mixed traffic. * Jean II */ void irlan_eth_flow_indication(void *instance, void *sap, LOCAL_FLOW flow) { struct irlan_cb *self; struct net_device *dev; self = instance; IRDA_ASSERT(self != NULL, return;); IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); dev = self->dev; IRDA_ASSERT(dev != NULL, return;); IRDA_DEBUG(0, "%s() : flow %s ; running %d\n", __func__, flow == FLOW_STOP ? "FLOW_STOP" : "FLOW_START", netif_running(dev)); switch (flow) { case FLOW_STOP: /* IrTTP is full, stop higher layers */ netif_stop_queue(dev); break; case FLOW_START: default: /* Tell upper layers that its time to transmit frames again */ /* Schedule network layer */ netif_wake_queue(dev); break; } } /* * Function set_multicast_list (dev) * * Configure the filtering of the device * */ #define HW_MAX_ADDRS 4 /* Must query to get it! */ static void irlan_eth_set_multicast_list(struct net_device *dev) { struct irlan_cb *self = netdev_priv(dev); IRDA_DEBUG(2, "%s()\n", __func__ ); /* Check if data channel has been connected yet */ if (self->client.state != IRLAN_DATA) { IRDA_DEBUG(1, "%s(), delaying!\n", __func__ ); return; } if (dev->flags & IFF_PROMISC) { /* Enable promiscuous mode */ IRDA_WARNING("Promiscuous mode not implemented by IrLAN!\n"); } else if ((dev->flags & IFF_ALLMULTI) || netdev_mc_count(dev) > HW_MAX_ADDRS) { /* Disable promiscuous mode, use normal mode. */ IRDA_DEBUG(4, "%s(), Setting multicast filter\n", __func__ ); /* hardware_set_filter(NULL); */ irlan_set_multicast_filter(self, TRUE); } else if (!netdev_mc_empty(dev)) { IRDA_DEBUG(4, "%s(), Setting multicast filter\n", __func__ ); /* Walk the address list, and load the filter */ /* hardware_set_filter(dev->mc_list); */ irlan_set_multicast_filter(self, TRUE); } else { IRDA_DEBUG(4, "%s(), Clearing multicast filter\n", __func__ ); irlan_set_multicast_filter(self, FALSE); } if (dev->flags & IFF_BROADCAST) irlan_set_broadcast_filter(self, TRUE); else irlan_set_broadcast_filter(self, FALSE); }