/* * HD-audio controller (Azalia) registers and helpers * * For traditional reasons, we still use azx_ prefix here */ #ifndef __SOUND_HDA_REGISTER_H #define __SOUND_HDA_REGISTER_H #include #include #define AZX_REG_GCAP 0x00 #define AZX_GCAP_64OK (1 << 0) /* 64bit address support */ #define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */ #define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */ #define AZX_GCAP_ISS (15 << 8) /* # of input streams */ #define AZX_GCAP_OSS (15 << 12) /* # of output streams */ #define AZX_REG_VMIN 0x02 #define AZX_REG_VMAJ 0x03 #define AZX_REG_OUTPAY 0x04 #define AZX_REG_INPAY 0x06 #define AZX_REG_GCTL 0x08 #define AZX_GCTL_RESET (1 << 0) /* controller reset */ #define AZX_GCTL_FCNTRL (1 << 1) /* flush control */ #define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ #define AZX_REG_WAKEEN 0x0c #define AZX_REG_STATESTS 0x0e #define AZX_REG_GSTS 0x10 #define AZX_GSTS_FSTS (1 << 1) /* flush status */ #define AZX_REG_GCAP2 0x12 #define AZX_REG_LLCH 0x14 #define AZX_REG_OUTSTRMPAY 0x18 #define AZX_REG_INSTRMPAY 0x1A #define AZX_REG_INTCTL 0x20 #define AZX_REG_INTSTS 0x24 #define AZX_REG_WALLCLK 0x30 /* 24Mhz source */ #define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */ #define AZX_REG_SSYNC 0x38 #define AZX_REG_CORBLBASE 0x40 #define AZX_REG_CORBUBASE 0x44 #define AZX_REG_CORBWP 0x48 #define AZX_REG_CORBRP 0x4a #define AZX_CORBRP_RST (1 << 15) /* read pointer reset */ #define AZX_REG_CORBCTL 0x4c #define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */ #define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ #define AZX_REG_CORBSTS 0x4d #define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */ #define AZX_REG_CORBSIZE 0x4e #define AZX_REG_RIRBLBASE 0x50 #define AZX_REG_RIRBUBASE 0x54 #define AZX_REG_RIRBWP 0x58 #define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */ #define AZX_REG_RINTCNT 0x5a #define AZX_REG_RIRBCTL 0x5c #define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ #define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */ #define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ #define AZX_REG_RIRBSTS 0x5d #define AZX_RBSTS_IRQ (1 << 0) /* response irq */ #define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */ #define AZX_REG_RIRBSIZE 0x5e #define AZX_REG_IC 0x60 #define AZX_REG_IR 0x64 #define AZX_REG_IRS 0x68 #define AZX_IRS_VALID (1<<1) #define AZX_IRS_BUSY (1<<0) #define AZX_REG_DPLBASE 0x70 #define AZX_REG_DPUBASE 0x74 #define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */ /* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; /* stream register offsets from stream base */ #define AZX_REG_SD_CTL 0x00 #define AZX_REG_SD_STS 0x03 #define AZX_REG_SD_LPIB 0x04 #define AZX_REG_SD_CBL 0x08 #define AZX_REG_SD_LVI 0x0c #define AZX_REG_SD_FIFOW 0x0e #define AZX_REG_SD_FIFOSIZE 0x10 #define AZX_REG_SD_FORMAT 0x12 #define AZX_REG_SD_FIFOL 0x14 #define AZX_REG_SD_BDLPL 0x18 #define AZX_REG_SD_BDLPU 0x1c /* Haswell/Broadwell display HD-A controller Extended Mode registers */ #define AZX_REG_HSW_EM4 0x100c #define AZX_REG_HSW_EM5 0x1010 /* PCI space */ #define AZX_PCIREG_TCSEL 0x44 /* * other constants */ /* max number of fragments - we may use more if allocating more pages for BDL */ #define BDL_SIZE 4096 #define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16) #define AZX_MAX_FRAG 32 /* max buffer size - no h/w limit, you can increase as you like */ #define AZX_MAX_BUF_SIZE (1024*1024*1024) /* RIRB int mask: overrun[2], response[0] */ #define RIRB_INT_RESPONSE 0x01 #define RIRB_INT_OVERRUN 0x04 #define RIRB_INT_MASK 0x05 /* STATESTS int mask: S3,SD2,SD1,SD0 */ #define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1) /* SD_CTL bits */ #define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */ #define SD_CTL_DMA_START 0x02 /* stream DMA start bit */ #define SD_CTL_STRIPE (3 << 16) /* stripe control */ #define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */ #define SD_CTL_DIR (1 << 19) /* bi-directional stream */ #define SD_CTL_STREAM_TAG_MASK (0xf << 20) #define SD_CTL_STREAM_TAG_SHIFT 20 /* SD_CTL and SD_STS */ #define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */ #define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */ #define SD_INT_COMPLETE 0x04 /* completion interrupt */ #define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\ SD_INT_COMPLETE) /* SD_STS */ #define SD_STS_FIFO_READY 0x20 /* FIFO ready */ /* INTCTL and INTSTS */ #define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */ #define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ #define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ /* below are so far hardcoded - should read registers in future */ #define AZX_MAX_CORB_ENTRIES 256 #define AZX_MAX_RIRB_ENTRIES 256 /* Capability header Structure */ #define AZX_REG_CAP_HDR 0x0 #define AZX_CAP_HDR_VER_OFF 28 #define AZX_CAP_HDR_VER_MASK (0xF << AZX_CAP_HDR_VER_OFF) #define AZX_CAP_HDR_ID_OFF 16 #define AZX_CAP_HDR_ID_MASK (0xFFF << AZX_CAP_HDR_ID_OFF) #define AZX_CAP_HDR_NXT_PTR_MASK 0xFFFF /* registers of Software Position Based FIFO Capability Structure */ #define AZX_SPB_CAP_ID 0x4 #define AZX_REG_SPB_BASE_ADDR 0x700 #define AZX_REG_SPB_SPBFCH 0x00 #define AZX_REG_SPB_SPBFCCTL 0x04 /* Base used to calculate the iterating register offset */ #define AZX_SPB_BASE 0x08 /* Interval used to calculate the iterating register offset */ #define AZX_SPB_INTERVAL 0x08 /* SPIB base */ #define AZX_SPB_SPIB 0x00 /* SPIB MAXFIFO base*/ #define AZX_SPB_MAXFIFO 0x04 /* registers of Global Time Synchronization Capability Structure */ #define AZX_GTS_CAP_ID 0x1 #define AZX_REG_GTS_GTSCH 0x00 #define AZX_REG_GTS_GTSCD 0x04 #define AZX_REG_GTS_GTSCTLAC 0x0C #define AZX_GTS_BASE 0x20 #define AZX_GTS_INTERVAL 0x20 /* registers for Processing Pipe Capability Structure */ #define AZX_PP_CAP_ID 0x3 #define AZX_REG_PP_PPCH 0x10 #define AZX_REG_PP_PPCTL 0x04 #define AZX_PPCTL_PIE (1<<31) #define AZX_PPCTL_GPROCEN (1<<30) /* _X_ = dma engine # and cannot * exceed 29 (per spec max 30 dma engines) */ #define AZX_PPCTL_PROCEN(_X_) (1<<(_X_)) #define AZX_REG_PP_PPSTS 0x08 #define AZX_PPHC_BASE 0x10 #define AZX_PPHC_INTERVAL 0x10 #define AZX_REG_PPHCLLPL 0x0 #define AZX_REG_PPHCLLPU 0x4 #define AZX_REG_PPHCLDPL 0x8 #define AZX_REG_PPHCLDPU 0xC #define AZX_PPLC_BASE 0x10 #define AZX_PPLC_MULTI 0x10 #define AZX_PPLC_INTERVAL 0x10 #define AZX_REG_PPLCCTL 0x0 #define AZX_PPLCCTL_STRM_BITS 4 #define AZX_PPLCCTL_STRM_SHIFT 20 #define AZX_REG_MASK(bit_num, offset) \ (((1 << (bit_num)) - 1) << (offset)) #define AZX_PPLCCTL_STRM_MASK \ AZX_REG_MASK(AZX_PPLCCTL_STRM_BITS, AZX_PPLCCTL_STRM_SHIFT) #define AZX_PPLCCTL_RUN (1<<1) #define AZX_PPLCCTL_STRST (1<<0) #define AZX_REG_PPLCFMT 0x4 #define AZX_REG_PPLCLLPL 0x8 #define AZX_REG_PPLCLLPU 0xC /* registers for Multiple Links Capability Structure */ #define AZX_ML_CAP_ID 0x2 #define AZX_REG_ML_MLCH 0x00 #define AZX_REG_ML_MLCD 0x04 #define AZX_ML_BASE 0x40 #define AZX_ML_INTERVAL 0x40 #define AZX_REG_ML_LCAP 0x00 #define AZX_REG_ML_LCTL 0x04 #define AZX_REG_ML_LOSIDV 0x08 #define AZX_REG_ML_LSDIID 0x0C #define AZX_REG_ML_LPSOO 0x10 #define AZX_REG_ML_LPSIO 0x12 #define AZX_REG_ML_LWALFC 0x18 #define AZX_REG_ML_LOUTPAY 0x20 #define AZX_REG_ML_LINPAY 0x30 #define AZX_MLCTL_SPA (1<<16) #define AZX_MLCTL_CPA 23 /* * helpers to read the stream position */ static inline unsigned int snd_hdac_stream_get_pos_lpib(struct hdac_stream *stream) { return snd_hdac_stream_readl(stream, SD_LPIB); } static inline unsigned int snd_hdac_stream_get_pos_posbuf(struct hdac_stream *stream) { return le32_to_cpu(*stream->posbuf); } #endif /* __SOUND_HDA_REGISTER_H */