/* * USB PHY defines * * These APIs may be used between USB controllers. USB device drivers * (for either host or peripheral roles) don't use these calls; they * continue to use just usb_device and usb_gadget. */ #ifndef __LINUX_USB_PHY_H #define __LINUX_USB_PHY_H #include #include enum usb_phy_interface { USBPHY_INTERFACE_MODE_UNKNOWN, USBPHY_INTERFACE_MODE_UTMI, USBPHY_INTERFACE_MODE_UTMIW, USBPHY_INTERFACE_MODE_ULPI, USBPHY_INTERFACE_MODE_SERIAL, USBPHY_INTERFACE_MODE_HSIC, }; enum usb_phy_events { USB_EVENT_NONE, /* no events or cable disconnected */ USB_EVENT_VBUS, /* vbus valid event */ USB_EVENT_ID, /* id was grounded */ USB_EVENT_CHARGER, /* usb dedicated charger */ USB_EVENT_ENUMERATED, /* gadget driver enumerated */ }; /* associate a type with PHY */ enum usb_phy_type { USB_PHY_TYPE_UNDEFINED, USB_PHY_TYPE_USB2, USB_PHY_TYPE_USB3, }; /* OTG defines lots of enumeration states before device reset */ enum usb_otg_state { OTG_STATE_UNDEFINED = 0, /* single-role peripheral, and dual-role default-b */ OTG_STATE_B_IDLE, OTG_STATE_B_SRP_INIT, OTG_STATE_B_PERIPHERAL, /* extra dual-role default-b states */ OTG_STATE_B_WAIT_ACON, OTG_STATE_B_HOST, /* dual-role default-a */ OTG_STATE_A_IDLE, OTG_STATE_A_WAIT_VRISE, OTG_STATE_A_WAIT_BCON, OTG_STATE_A_HOST, OTG_STATE_A_SUSPEND, OTG_STATE_A_PERIPHERAL, OTG_STATE_A_WAIT_VFALL, OTG_STATE_A_VBUS_ERR, }; struct usb_phy; struct usb_otg; /* for transceivers connected thru an ULPI interface, the user must * provide access ops */ struct usb_phy_io_ops { int (*read)(struct usb_phy *x, u32 reg); int (*write)(struct usb_phy *x, u32 val, u32 reg); }; struct usb_phy { struct device *dev; const char *label; unsigned int flags; enum usb_phy_type type; enum usb_phy_events last_event; struct usb_otg *otg; struct device *io_dev; struct usb_phy_io_ops *io_ops; void __iomem *io_priv; /* for notification of usb_phy_events */ struct atomic_notifier_head notifier; /* to pass extra port status to the root hub */ u16 port_status; u16 port_change; /* to support controllers that have multiple transceivers */ struct list_head head; /* initialize/shutdown the OTG controller */ int (*init)(struct usb_phy *x); void (*shutdown)(struct usb_phy *x); /* enable/disable VBUS */ int (*set_vbus)(struct usb_phy *x, int on); /* effective for B devices, ignored for A-peripheral */ int (*set_power)(struct usb_phy *x, unsigned mA); /* Set transceiver into suspend mode */ int (*set_suspend)(struct usb_phy *x, int suspend); /* * Set wakeup enable for PHY, in that case, the PHY can be * woken up from suspend status due to external events, * like vbus change, dp/dm change and id. */ int (*set_wakeup)(struct usb_phy *x, bool enabled); /* notify phy connect status change */ int (*notify_connect)(struct usb_phy *x, enum usb_device_speed speed); int (*notify_disconnect)(struct usb_phy *x, enum usb_device_speed speed); }; /** * struct usb_phy_bind - represent the binding for the phy * @dev_name: the device name of the device that will bind to the phy * @phy_dev_name: the device name of the phy * @index: used if a single controller uses multiple phys * @phy: reference to the phy * @list: to maintain a linked list of the binding information */ struct usb_phy_bind { const char *dev_name; const char *phy_dev_name; u8 index; struct usb_phy *phy; struct list_head list; }; /* for board-specific init logic */ extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type); extern int usb_add_phy_dev(struct usb_phy *); extern void usb_remove_phy(struct usb_phy *); /* helpers for direct access thru low-level io interface */ static inline int usb_phy_io_read(struct usb_phy *x, u32 reg) { if (x && x->io_ops && x->io_ops->read) return x->io_ops->read(x, reg); return -EINVAL; } static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg) { if (x && x->io_ops && x->io_ops->write) return x->io_ops->write(x, val, reg); return -EINVAL; } static inline int usb_phy_init(struct usb_phy *x) { if (x && x->init) return x->init(x); return 0; } static inline void usb_phy_shutdown(struct usb_phy *x) { if (x && x->shutdown) x->shutdown(x); } static inline int usb_phy_vbus_on(struct usb_phy *x) { if (!x || !x->set_vbus) return 0; return x->set_vbus(x, true); } static inline int usb_phy_vbus_off(struct usb_phy *x) { if (!x || !x->set_vbus) return 0; return x->set_vbus(x, false); } /* for usb host and peripheral controller drivers */ #if IS_ENABLED(CONFIG_USB_PHY) extern struct usb_phy *usb_get_phy(enum usb_phy_type type); extern struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type); extern struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index); extern struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index); extern struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, const char *phandle, u8 index); extern struct usb_phy *devm_usb_get_phy_by_node(struct device *dev, struct device_node *node, struct notifier_block *nb); extern void usb_put_phy(struct usb_phy *); extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x); extern int usb_bind_phy(const char *dev_name, u8 index, const char *phy_dev_name); extern void usb_phy_set_event(struct usb_phy *x, unsigned long event); #else static inline struct usb_phy *usb_get_phy(enum usb_phy_type type) { return ERR_PTR(-ENXIO); } static inline struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type) { return ERR_PTR(-ENXIO); } static inline struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index) { return ERR_PTR(-ENXIO); } static inline struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index) { return ERR_PTR(-ENXIO); } static inline struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, const char *phandle, u8 index) { return ERR_PTR(-ENXIO); } static inline struct usb_phy *devm_usb_get_phy_by_node(struct device *dev, struct device_node *node, struct notifier_block *nb) { return ERR_PTR(-ENXIO); } static inline void usb_put_phy(struct usb_phy *x) { } static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x) { } static inline int usb_bind_phy(const char *dev_name, u8 index, const char *phy_dev_name) { return -EOPNOTSUPP; } static inline void usb_phy_set_event(struct usb_phy *x, unsigned long event) { } #endif static inline int usb_phy_set_power(struct usb_phy *x, unsigned mA) { if (x && x->set_power) return x->set_power(x, mA); return 0; } /* Context: can sleep */ static inline int usb_phy_set_suspend(struct usb_phy *x, int suspend) { if (x && x->set_suspend != NULL) return x->set_suspend(x, suspend); else return 0; } static inline int usb_phy_set_wakeup(struct usb_phy *x, bool enabled) { if (x && x->set_wakeup) return x->set_wakeup(x, enabled); else return 0; } static inline int usb_phy_notify_connect(struct usb_phy *x, enum usb_device_speed speed) { if (x && x->notify_connect) return x->notify_connect(x, speed); else return 0; } static inline int usb_phy_notify_disconnect(struct usb_phy *x, enum usb_device_speed speed) { if (x && x->notify_disconnect) return x->notify_disconnect(x, speed); else return 0; } /* notifiers */ static inline int usb_register_notifier(struct usb_phy *x, struct notifier_block *nb) { return atomic_notifier_chain_register(&x->notifier, nb); } static inline void usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) { atomic_notifier_chain_unregister(&x->notifier, nb); } static inline const char *usb_phy_type_string(enum usb_phy_type type) { switch (type) { case USB_PHY_TYPE_USB2: return "USB2 PHY"; case USB_PHY_TYPE_USB3: return "USB3 PHY"; default: return "UNKNOWN PHY TYPE"; } } #endif /* __LINUX_USB_PHY_H */