/* * Definitions for the registers, addresses, and platform data of the * DS1685/DS1687-series RTC chips. * * This Driver also works for the DS17X85/DS17X87 RTC chips. Functionally * similar to the DS1685/DS1687, they support a few extra features which * include larger, battery-backed NV-SRAM, burst-mode access, and an RTC * write counter. * * Copyright (C) 2011-2014 Joshua Kinard . * Copyright (C) 2009 Matthias Fuchs . * * References: * DS1685/DS1687 3V/5V Real-Time Clocks, 19-5215, Rev 4/10. * DS17x85/DS17x87 3V/5V Real-Time Clocks, 19-5222, Rev 4/10. * DS1689/DS1693 3V/5V Serialized Real-Time Clocks, Rev 112105. * Application Note 90, Using the Multiplex Bus RTC Extended Features. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef _LINUX_RTC_DS1685_H_ #define _LINUX_RTC_DS1685_H_ #include #include #include /** * struct ds1685_priv - DS1685 private data structure. * @dev: pointer to the rtc_device structure. * @regs: iomapped base address pointer of the RTC registers. * @regstep: padding/step size between registers (optional). * @baseaddr: base address of the RTC device. * @size: resource size. * @lock: private lock variable for spin locking/unlocking. * @work: private workqueue. * @irq: IRQ number assigned to the RTC device. * @prepare_poweroff: pointer to platform pre-poweroff function. * @wake_alarm: pointer to platform wake alarm function. * @post_ram_clear: pointer to platform post ram-clear function. */ struct ds1685_priv { struct rtc_device *dev; void __iomem *regs; u32 regstep; resource_size_t baseaddr; size_t size; spinlock_t lock; struct work_struct work; int irq_num; bool bcd_mode; bool no_irq; bool uie_unsupported; bool alloc_io_resources; u8 (*read)(struct ds1685_priv *, int); void (*write)(struct ds1685_priv *, int, u8); void (*prepare_poweroff)(void); void (*wake_alarm)(void); void (*post_ram_clear)(void); }; /** * struct ds1685_rtc_platform_data - platform data structure. * @plat_prepare_poweroff: platform-specific pre-poweroff function. * @plat_wake_alarm: platform-specific wake alarm function. * @plat_post_ram_clear: platform-specific post ram-clear function. * * If your platform needs to use a custom padding/step size between * registers, or uses one or more of the extended interrupts and needs special * handling, then include this header file in your platform definition and * set regstep and the plat_* pointers as appropriate. */ struct ds1685_rtc_platform_data { const u32 regstep; const bool bcd_mode; const bool no_irq; const bool uie_unsupported; const bool alloc_io_resources; u8 (*plat_read)(struct ds1685_priv *, int); void (*plat_write)(struct ds1685_priv *, int, u8); void (*plat_prepare_poweroff)(void); void (*plat_wake_alarm)(void); void (*plat_post_ram_clear)(void); }; /* * Time Registers. */ #define RTC_SECS 0x00 /* Seconds 00-59 */ #define RTC_SECS_ALARM 0x01 /* Alarm Seconds 00-59 */ #define RTC_MINS 0x02 /* Minutes 00-59 */ #define RTC_MINS_ALARM 0x03 /* Alarm Minutes 00-59 */ #define RTC_HRS 0x04 /* Hours 01-12 AM/PM || 00-23 */ #define RTC_HRS_ALARM 0x05 /* Alarm Hours 01-12 AM/PM || 00-23 */ #define RTC_WDAY 0x06 /* Day of Week 01-07 */ #define RTC_MDAY 0x07 /* Day of Month 01-31 */ #define RTC_MONTH 0x08 /* Month 01-12 */ #define RTC_YEAR 0x09 /* Year 00-99 */ #define RTC_CENTURY 0x48 /* Century 00-99 */ #define RTC_MDAY_ALARM 0x49 /* Alarm Day of Month 01-31 */ /* * Bit masks for the Time registers in BCD Mode (DM = 0). */ #define RTC_SECS_BCD_MASK 0x7f /* - x x x x x x x */ #define RTC_MINS_BCD_MASK 0x7f /* - x x x x x x x */ #define RTC_HRS_12_BCD_MASK 0x1f /* - - - x x x x x */ #define RTC_HRS_24_BCD_MASK 0x3f /* - - x x x x x x */ #define RTC_MDAY_BCD_MASK 0x3f /* - - x x x x x x */ #define RTC_MONTH_BCD_MASK 0x1f /* - - - x x x x x */ #define RTC_YEAR_BCD_MASK 0xff /* x x x x x x x x */ /* * Bit masks for the Time registers in BIN Mode (DM = 1). */ #define RTC_SECS_BIN_MASK 0x3f /* - - x x x x x x */ #define RTC_MINS_BIN_MASK 0x3f /* - - x x x x x x */ #define RTC_HRS_12_BIN_MASK 0x0f /* - - - - x x x x */ #define RTC_HRS_24_BIN_MASK 0x1f /* - - - x x x x x */ #define RTC_MDAY_BIN_MASK 0x1f /* - - - x x x x x */ #define RTC_MONTH_BIN_MASK 0x0f /* - - - - x x x x */ #define RTC_YEAR_BIN_MASK 0x7f /* - x x x x x x x */ /* * Bit masks common for the Time registers in BCD or BIN Mode. */ #define RTC_WDAY_MASK 0x07 /* - - - - - x x x */ #define RTC_CENTURY_MASK 0xff /* x x x x x x x x */ #define RTC_MDAY_ALARM_MASK 0xff /* x x x x x x x x */ #define RTC_HRS_AMPM_MASK BIT(7) /* Mask for the AM/PM bit */ /* * Control Registers. */ #define RTC_CTRL_A 0x0a /* Control Register A */ #define RTC_CTRL_B 0x0b /* Control Register B */ #define RTC_CTRL_C 0x0c /* Control Register C */ #define RTC_CTRL_D 0x0d /* Control Register D */ #define RTC_EXT_CTRL_4A 0x4a /* Extended Control Register 4A */ #define RTC_EXT_CTRL_4B 0x4b /* Extended Control Register 4B */ /* * Bit names in Control Register A. */ #define RTC_CTRL_A_UIP BIT(7) /* Update In Progress */ #define RTC_CTRL_A_DV2 BIT(6) /* Countdown Chain */ #define RTC_CTRL_A_DV1 BIT(5) /* Oscillator Enable */ #define RTC_CTRL_A_DV0 BIT(4) /* Bank Select */ #define RTC_CTRL_A_RS2 BIT(2) /* Rate-Selection Bit 2 */ #define RTC_CTRL_A_RS3 BIT(3) /* Rate-Selection Bit 3 */ #define RTC_CTRL_A_RS1 BIT(1) /* Rate-Selection Bit 1 */ #define RTC_CTRL_A_RS0 BIT(0) /* Rate-Selection Bit 0 */ #define RTC_CTRL_A_RS_MASK 0x0f /* RS3 + RS2 + RS1 + RS0 */ /* * Bit names in Control Register B. */ #define RTC_CTRL_B_SET BIT(7) /* SET Bit */ #define RTC_CTRL_B_PIE BIT(6) /* Periodic-Interrupt Enable */ #define RTC_CTRL_B_AIE BIT(5) /* Alarm-Interrupt Enable */ #define RTC_CTRL_B_UIE BIT(4) /* Update-Ended Interrupt-Enable */ #define RTC_CTRL_B_SQWE BIT(3) /* Square-Wave Enable */ #define RTC_CTRL_B_DM BIT(2) /* Data Mode */ #define RTC_CTRL_B_2412 BIT(1) /* 12-Hr/24-Hr Mode */ #define RTC_CTRL_B_DSE BIT(0) /* Daylight Savings Enable */ #define RTC_CTRL_B_PAU_MASK 0x70 /* PIE + AIE + UIE */ /* * Bit names in Control Register C. * * BIT(0), BIT(1), BIT(2), & BIT(3) are unused, always return 0, and cannot * be written to. */ #define RTC_CTRL_C_IRQF BIT(7) /* Interrupt-Request Flag */ #define RTC_CTRL_C_PF BIT(6) /* Periodic-Interrupt Flag */ #define RTC_CTRL_C_AF BIT(5) /* Alarm-Interrupt Flag */ #define RTC_CTRL_C_UF BIT(4) /* Update-Ended Interrupt Flag */ #define RTC_CTRL_C_PAU_MASK 0x70 /* PF + AF + UF */ /* * Bit names in Control Register D. * * BIT(0) through BIT(6) are unused, always return 0, and cannot * be written to. */ #define RTC_CTRL_D_VRT BIT(7) /* Valid RAM and Time */ /* * Bit names in Extended Control Register 4A. * * On the DS1685/DS1687/DS1689/DS1693, BIT(4) and BIT(5) are reserved for * future use. They can be read from and written to, but have no effect * on the RTC's operation. * * On the DS17x85/DS17x87, BIT(5) is Burst-Mode Enable (BME), and allows * access to the extended NV-SRAM by automatically incrementing the address * register when they are read from or written to. */ #define RTC_CTRL_4A_VRT2 BIT(7) /* Auxillary Battery Status */ #define RTC_CTRL_4A_INCR BIT(6) /* Increment-in-Progress Status */ #define RTC_CTRL_4A_PAB BIT(3) /* Power-Active Bar Control */ #define RTC_CTRL_4A_RF BIT(2) /* RAM-Clear Flag */ #define RTC_CTRL_4A_WF BIT(1) /* Wake-Up Alarm Flag */ #define RTC_CTRL_4A_KF BIT(0) /* Kickstart Flag */ #if !defined(CONFIG_RTC_DRV_DS1685) && !defined(CONFIG_RTC_DRV_DS1689) #define RTC_CTRL_4A_BME BIT(5) /* Burst-Mode Enable */ #endif #define RTC_CTRL_4A_RWK_MASK 0x07 /* RF + WF + KF */ /* * Bit names in Extended Control Register 4B. */ #define RTC_CTRL_4B_ABE BIT(7) /* Auxillary Battery Enable */ #define RTC_CTRL_4B_E32K BIT(6) /* Enable 32.768Hz on SQW Pin */ #define RTC_CTRL_4B_CS BIT(5) /* Crystal Select */ #define RTC_CTRL_4B_RCE BIT(4) /* RAM Clear-Enable */ #define RTC_CTRL_4B_PRS BIT(3) /* PAB Reset-Select */ #define RTC_CTRL_4B_RIE BIT(2) /* RAM Clear-Interrupt Enable */ #define RTC_CTRL_4B_WIE BIT(1) /* Wake-Up Alarm-Interrupt Enable */ #define RTC_CTRL_4B_KSE BIT(0) /* Kickstart Interrupt-Enable */ #define RTC_CTRL_4B_RWK_MASK 0x07 /* RIE + WIE + KSE */ /* * Misc register names in Bank 1. * * The DV0 bit in Control Register A must be set to 1 for these registers * to become available, including Extended Control Registers 4A & 4B. */ #define RTC_BANK1_SSN_MODEL 0x40 /* Model Number */ #define RTC_BANK1_SSN_BYTE_1 0x41 /* 1st Byte of Serial Number */ #define RTC_BANK1_SSN_BYTE_2 0x42 /* 2nd Byte of Serial Number */ #define RTC_BANK1_SSN_BYTE_3 0x43 /* 3rd Byte of Serial Number */ #define RTC_BANK1_SSN_BYTE_4 0x44 /* 4th Byte of Serial Number */ #define RTC_BANK1_SSN_BYTE_5 0x45 /* 5th Byte of Serial Number */ #define RTC_BANK1_SSN_BYTE_6 0x46 /* 6th Byte of Serial Number */ #define RTC_BANK1_SSN_CRC 0x47 /* Serial CRC Byte */ #define RTC_BANK1_RAM_DATA_PORT 0x53 /* Extended RAM Data Port */ /* * Model-specific registers in Bank 1. * * The addresses below differ depending on the model of the RTC chip * selected in the kernel configuration. Not all of these features are * supported in the main driver at present. * * DS1685/DS1687 - Extended NV-SRAM address (LSB only). * DS1689/DS1693 - Vcc, Vbat, Pwr Cycle Counters & Customer-specific S/N. * DS17x85/DS17x87 - Extended NV-SRAM addresses (MSB & LSB) & Write counter. */ #if defined(CONFIG_RTC_DRV_DS1685) #define RTC_BANK1_RAM_ADDR 0x50 /* NV-SRAM Addr */ #elif defined(CONFIG_RTC_DRV_DS1689) #define RTC_BANK1_VCC_CTR_LSB 0x54 /* Vcc Counter Addr (LSB) */ #define RTC_BANK1_VCC_CTR_MSB 0x57 /* Vcc Counter Addr (MSB) */ #define RTC_BANK1_VBAT_CTR_LSB 0x58 /* Vbat Counter Addr (LSB) */ #define RTC_BANK1_VBAT_CTR_MSB 0x5b /* Vbat Counter Addr (MSB) */ #define RTC_BANK1_PWR_CTR_LSB 0x5c /* Pwr Cycle Counter Addr (LSB) */ #define RTC_BANK1_PWR_CTR_MSB 0x5d /* Pwr Cycle Counter Addr (MSB) */ #define RTC_BANK1_UNIQ_SN 0x60 /* Customer-specific S/N */ #else /* DS17x85/DS17x87 */ #define RTC_BANK1_RAM_ADDR_LSB 0x50 /* NV-SRAM Addr (LSB) */ #define RTC_BANK1_RAM_ADDR_MSB 0x51 /* NV-SRAM Addr (MSB) */ #define RTC_BANK1_WRITE_CTR 0x5e /* RTC Write Counter */ #endif /* * Model numbers. * * The DS1688/DS1691 and DS1689/DS1693 chips share the same model number * and the manual doesn't indicate any major differences. As such, they * are regarded as the same chip in this driver. */ #define RTC_MODEL_DS1685 0x71 /* DS1685/DS1687 */ #define RTC_MODEL_DS17285 0x72 /* DS17285/DS17287 */ #define RTC_MODEL_DS1689 0x73 /* DS1688/DS1691/DS1689/DS1693 */ #define RTC_MODEL_DS17485 0x74 /* DS17485/DS17487 */ #define RTC_MODEL_DS17885 0x78 /* DS17885/DS17887 */ /* * Periodic Interrupt Rates / Square-Wave Output Frequency * * Periodic rates are selected by setting the RS3-RS0 bits in Control * Register A and enabled via either the E32K bit in Extended Control * Register 4B or the SQWE bit in Control Register B. * * E32K overrides the settings of RS3-RS0 and outputs a frequency of 32768Hz * on the SQW pin of the RTC chip. While there are 16 possible selections, * the 1-of-16 decoder is only able to divide the base 32768Hz signal into 13 * smaller frequencies. The values 0x01 and 0x02 are not used and are * synonymous with 0x08 and 0x09, respectively. * * When E32K is set to a logic 1, periodic interrupts are disabled and reading * /dev/rtc will return -EINVAL. This also applies if the periodic interrupt * frequency is set to 0Hz. * * Not currently used by the rtc-ds1685 driver because the RTC core removed * support for hardware-generated periodic-interrupts in favour of * hrtimer-generated interrupts. But these defines are kept around for use * in userland, as documentation to the hardware, and possible future use if * hardware-generated periodic interrupts are ever added back. */ /* E32K RS3 RS2 RS1 RS0 */ #define RTC_SQW_8192HZ 0x03 /* 0 0 0 1 1 */ #define RTC_SQW_4096HZ 0x04 /* 0 0 1 0 0 */ #define RTC_SQW_2048HZ 0x05 /* 0 0 1 0 1 */ #define RTC_SQW_1024HZ 0x06 /* 0 0 1 1 0 */ #define RTC_SQW_512HZ 0x07 /* 0 0 1 1 1 */ #define RTC_SQW_256HZ 0x08 /* 0 1 0 0 0 */ #define RTC_SQW_128HZ 0x09 /* 0 1 0 0 1 */ #define RTC_SQW_64HZ 0x0a /* 0 1 0 1 0 */ #define RTC_SQW_32HZ 0x0b /* 0 1 0 1 1 */ #define RTC_SQW_16HZ 0x0c /* 0 1 1 0 0 */ #define RTC_SQW_8HZ 0x0d /* 0 1 1 0 1 */ #define RTC_SQW_4HZ 0x0e /* 0 1 1 1 0 */ #define RTC_SQW_2HZ 0x0f /* 0 1 1 1 1 */ #define RTC_SQW_0HZ 0x00 /* 0 0 0 0 0 */ #define RTC_SQW_32768HZ 32768 /* 1 - - - - */ #define RTC_MAX_USER_FREQ 8192 /* * NVRAM data & addresses: * - 50 bytes of NVRAM are available just past the clock registers. * - 64 additional bytes are available in Bank0. * * Extended, battery-backed NV-SRAM: * - DS1685/DS1687 - 128 bytes. * - DS1689/DS1693 - 0 bytes. * - DS17285/DS17287 - 2048 bytes. * - DS17485/DS17487 - 4096 bytes. * - DS17885/DS17887 - 8192 bytes. */ #define NVRAM_TIME_BASE 0x0e /* NVRAM Addr in Time regs */ #define NVRAM_BANK0_BASE 0x40 /* NVRAM Addr in Bank0 regs */ #define NVRAM_SZ_TIME 50 #define NVRAM_SZ_BANK0 64 #if defined(CONFIG_RTC_DRV_DS1685) # define NVRAM_SZ_EXTND 128 #elif defined(CONFIG_RTC_DRV_DS1689) # define NVRAM_SZ_EXTND 0 #elif defined(CONFIG_RTC_DRV_DS17285) # define NVRAM_SZ_EXTND 2048 #elif defined(CONFIG_RTC_DRV_DS17485) # define NVRAM_SZ_EXTND 4096 #elif defined(CONFIG_RTC_DRV_DS17885) # define NVRAM_SZ_EXTND 8192 #endif #define NVRAM_TOTAL_SZ_BANK0 (NVRAM_SZ_TIME + NVRAM_SZ_BANK0) #define NVRAM_TOTAL_SZ (NVRAM_TOTAL_SZ_BANK0 + NVRAM_SZ_EXTND) /* * Function Prototypes. */ extern void __noreturn ds1685_rtc_poweroff(struct platform_device *pdev); #endif /* _LINUX_RTC_DS1685_H_ */