/* * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * BSD LICENSE * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef __ISCI_H__ #define __ISCI_H__ #include #include #define DRV_NAME "isci" #define SCI_PCI_BAR_COUNT 2 #define SCI_NUM_MSI_X_INT 2 #define SCI_SMU_BAR 0 #define SCI_SMU_BAR_SIZE (16*1024) #define SCI_SCU_BAR 1 #define SCI_SCU_BAR_SIZE (4*1024*1024) #define SCI_IO_SPACE_BAR0 2 #define SCI_IO_SPACE_BAR1 3 #define ISCI_CAN_QUEUE_VAL 250 /* < SCI_MAX_IO_REQUESTS ? */ #define SCIC_CONTROLLER_STOP_TIMEOUT 5000 #define SCI_CONTROLLER_INVALID_IO_TAG 0xFFFF #define SCI_MAX_PHYS (4UL) #define SCI_MAX_PORTS SCI_MAX_PHYS #define SCI_MAX_SMP_PHYS (384) /* not silicon constrained */ #define SCI_MAX_REMOTE_DEVICES (256UL) #define SCI_MAX_IO_REQUESTS (256UL) #define SCI_MAX_SEQ (16) #define SCI_MAX_MSIX_MESSAGES (2) #define SCI_MAX_SCATTER_GATHER_ELEMENTS 130 /* not silicon constrained */ #define SCI_MAX_CONTROLLERS 2 #define SCI_MAX_DOMAINS SCI_MAX_PORTS #define SCU_MAX_CRITICAL_NOTIFICATIONS (384) #define SCU_MAX_EVENTS_SHIFT (7) #define SCU_MAX_EVENTS (1 << SCU_MAX_EVENTS_SHIFT) #define SCU_MAX_UNSOLICITED_FRAMES (128) #define SCU_MAX_COMPLETION_QUEUE_SCRATCH (128) #define SCU_MAX_COMPLETION_QUEUE_ENTRIES (SCU_MAX_CRITICAL_NOTIFICATIONS \ + SCU_MAX_EVENTS \ + SCU_MAX_UNSOLICITED_FRAMES \ + SCI_MAX_IO_REQUESTS \ + SCU_MAX_COMPLETION_QUEUE_SCRATCH) #define SCU_MAX_COMPLETION_QUEUE_SHIFT (ilog2(SCU_MAX_COMPLETION_QUEUE_ENTRIES)) #define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096) #define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024U) #define SCU_INVALID_FRAME_INDEX (0xFFFF) #define SCU_IO_REQUEST_MAX_SGE_SIZE (0x00FFFFFF) #define SCU_IO_REQUEST_MAX_TRANSFER_LENGTH (0x00FFFFFF) static inline void check_sizes(void) { BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_EVENTS); BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES <= 8); BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_UNSOLICITED_FRAMES); BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_COMPLETION_QUEUE_ENTRIES); BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES > SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES); BUILD_BUG_ON_NOT_POWER_OF_2(SCI_MAX_IO_REQUESTS); BUILD_BUG_ON_NOT_POWER_OF_2(SCI_MAX_SEQ); } /** * enum sci_status - This is the general return status enumeration for non-IO, * non-task management related SCI interface methods. * * */ enum sci_status { /** * This member indicates successful completion. */ SCI_SUCCESS = 0, /** * This value indicates that the calling method completed successfully, * but that the IO may have completed before having it's start method * invoked. This occurs during SAT translation for requests that do * not require an IO to the target or for any other requests that may * be completed without having to submit IO. */ SCI_SUCCESS_IO_COMPLETE_BEFORE_START, /** * This Value indicates that the SCU hardware returned an early response * because the io request specified more data than is returned by the * target device (mode pages, inquiry data, etc.). The completion routine * will handle this case to get the actual number of bytes transferred. */ SCI_SUCCESS_IO_DONE_EARLY, /** * This member indicates that the object for which a state change is * being requested is already in said state. */ SCI_WARNING_ALREADY_IN_STATE, /** * This member indicates interrupt coalescence timer may cause SAS * specification compliance issues (i.e. SMP target mode response * frames must be returned within 1.9 milliseconds). */ SCI_WARNING_TIMER_CONFLICT, /** * This field indicates a sequence of action is not completed yet. Mostly, * this status is used when multiple ATA commands are needed in a SATI translation. */ SCI_WARNING_SEQUENCE_INCOMPLETE, /** * This member indicates that there was a general failure. */ SCI_FAILURE, /** * This member indicates that the SCI implementation is unable to complete * an operation due to a critical flaw the prevents any further operation * (i.e. an invalid pointer). */ SCI_FATAL_ERROR, /** * This member indicates the calling function failed, because the state * of the controller is in a state that prevents successful completion. */ SCI_FAILURE_INVALID_STATE, /** * This member indicates the calling function failed, because there is * insufficient resources/memory to complete the request. */ SCI_FAILURE_INSUFFICIENT_RESOURCES, /** * This member indicates the calling function failed, because the * controller object required for the operation can't be located. */ SCI_FAILURE_CONTROLLER_NOT_FOUND, /** * This member indicates the calling function failed, because the * discovered controller type is not supported by the library. */ SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE, /** * This member indicates the calling function failed, because the * requested initialization data version isn't supported. */ SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION, /** * This member indicates the calling function failed, because the * requested configuration of SAS Phys into SAS Ports is not supported. */ SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION, /** * This member indicates the calling function failed, because the * requested protocol is not supported by the remote device, port, * or controller. */ SCI_FAILURE_UNSUPPORTED_PROTOCOL, /** * This member indicates the calling function failed, because the * requested information type is not supported by the SCI implementation. */ SCI_FAILURE_UNSUPPORTED_INFORMATION_TYPE, /** * This member indicates the calling function failed, because the * device already exists. */ SCI_FAILURE_DEVICE_EXISTS, /** * This member indicates the calling function failed, because adding * a phy to the object is not possible. */ SCI_FAILURE_ADDING_PHY_UNSUPPORTED, /** * This member indicates the calling function failed, because the * requested information type is not supported by the SCI implementation. */ SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD, /** * This member indicates the calling function failed, because the SCI * implementation does not support the supplied time limit. */ SCI_FAILURE_UNSUPPORTED_TIME_LIMIT, /** * This member indicates the calling method failed, because the SCI * implementation does not contain the specified Phy. */ SCI_FAILURE_INVALID_PHY, /** * This member indicates the calling method failed, because the SCI * implementation does not contain the specified Port. */ SCI_FAILURE_INVALID_PORT, /** * This member indicates the calling method was partly successful * The port was reset but not all phys in port are operational */ SCI_FAILURE_RESET_PORT_PARTIAL_SUCCESS, /** * This member indicates that calling method failed * The port reset did not complete because none of the phys are operational */ SCI_FAILURE_RESET_PORT_FAILURE, /** * This member indicates the calling method failed, because the SCI * implementation does not contain the specified remote device. */ SCI_FAILURE_INVALID_REMOTE_DEVICE, /** * This member indicates the calling method failed, because the remote * device is in a bad state and requires a reset. */ SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, /** * This member indicates the calling method failed, because the SCI * implementation does not contain or support the specified IO tag. */ SCI_FAILURE_INVALID_IO_TAG, /** * This member indicates that the operation failed and the user should * check the response data associated with the IO. */ SCI_FAILURE_IO_RESPONSE_VALID, /** * This member indicates that the operation failed, the failure is * controller implementation specific, and the response data associated * with the request is not valid. You can query for the controller * specific error information via sci_controller_get_request_status() */ SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, /** * This member indicated that the operation failed because the * user requested this IO to be terminated. */ SCI_FAILURE_IO_TERMINATED, /** * This member indicates that the operation failed and the associated * request requires a SCSI abort task to be sent to the target. */ SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, /** * This member indicates that the operation failed because the supplied * device could not be located. */ SCI_FAILURE_DEVICE_NOT_FOUND, /** * This member indicates that the operation failed because the * objects association is required and is not correctly set. */ SCI_FAILURE_INVALID_ASSOCIATION, /** * This member indicates that the operation failed, because a timeout * occurred. */ SCI_FAILURE_TIMEOUT, /** * This member indicates that the operation failed, because the user * specified a value that is either invalid or not supported. */ SCI_FAILURE_INVALID_PARAMETER_VALUE, /** * This value indicates that the operation failed, because the number * of messages (MSI-X) is not supported. */ SCI_FAILURE_UNSUPPORTED_MESSAGE_COUNT, /** * This value indicates that the method failed due to a lack of * available NCQ tags. */ SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, /** * This value indicates that a protocol violation has occurred on the * link. */ SCI_FAILURE_PROTOCOL_VIOLATION, /** * This value indicates a failure condition that retry may help to clear. */ SCI_FAILURE_RETRY_REQUIRED, /** * This field indicates the retry limit was reached when a retry is attempted */ SCI_FAILURE_RETRY_LIMIT_REACHED, /** * This member indicates the calling method was partly successful. * Mostly, this status is used when a LUN_RESET issued to an expander attached * STP device in READY NCQ substate needs to have RNC suspended/resumed * before posting TC. */ SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS, /** * This field indicates an illegal phy connection based on the routing attribute * of both expander phy attached to each other. */ SCI_FAILURE_ILLEGAL_ROUTING_ATTRIBUTE_CONFIGURATION, /** * This field indicates a CONFIG ROUTE INFO command has a response with function result * INDEX DOES NOT EXIST, usually means exceeding max route index. */ SCI_FAILURE_EXCEED_MAX_ROUTE_INDEX, /** * This value indicates that an unsupported PCI device ID has been * specified. This indicates that attempts to invoke * sci_library_allocate_controller() will fail. */ SCI_FAILURE_UNSUPPORTED_PCI_DEVICE_ID }; /** * enum sci_io_status - This enumeration depicts all of the possible IO * completion status values. Each value in this enumeration maps directly * to a value in the enum sci_status enumeration. Please refer to that * enumeration for detailed comments concerning what the status represents. * * Add the API to retrieve the SCU status from the core. Check to see that the * following status are properly handled: - SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL * - SCI_IO_FAILURE_INVALID_IO_TAG */ enum sci_io_status { SCI_IO_SUCCESS = SCI_SUCCESS, SCI_IO_FAILURE = SCI_FAILURE, SCI_IO_SUCCESS_COMPLETE_BEFORE_START = SCI_SUCCESS_IO_COMPLETE_BEFORE_START, SCI_IO_SUCCESS_IO_DONE_EARLY = SCI_SUCCESS_IO_DONE_EARLY, SCI_IO_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, SCI_IO_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, SCI_IO_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, SCI_IO_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, SCI_IO_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, SCI_IO_FAILURE_REQUIRES_SCSI_ABORT = SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, SCI_IO_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, SCI_IO_FAILURE_NO_NCQ_TAG_AVAILABLE = SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, SCI_IO_FAILURE_PROTOCOL_VIOLATION = SCI_FAILURE_PROTOCOL_VIOLATION, SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, SCI_IO_FAILURE_RETRY_REQUIRED = SCI_FAILURE_RETRY_REQUIRED, SCI_IO_FAILURE_RETRY_LIMIT_REACHED = SCI_FAILURE_RETRY_LIMIT_REACHED, SCI_IO_FAILURE_INVALID_REMOTE_DEVICE = SCI_FAILURE_INVALID_REMOTE_DEVICE }; /** * enum sci_task_status - This enumeration depicts all of the possible task * completion status values. Each value in this enumeration maps directly * to a value in the enum sci_status enumeration. Please refer to that * enumeration for detailed comments concerning what the status represents. * * Check to see that the following status are properly handled: */ enum sci_task_status { SCI_TASK_SUCCESS = SCI_SUCCESS, SCI_TASK_FAILURE = SCI_FAILURE, SCI_TASK_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, SCI_TASK_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, SCI_TASK_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, SCI_TASK_FAILURE_INVALID_TAG = SCI_FAILURE_INVALID_IO_TAG, SCI_TASK_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, SCI_TASK_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, SCI_TASK_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, SCI_TASK_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, SCI_TASK_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, SCI_TASK_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS = SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS }; /** * sci_swab32_cpy - convert between scsi and scu-hardware byte format * @dest: receive the 4-byte endian swapped version of src * @src: word aligned source buffer * * scu hardware handles SSP/SMP control, response, and unidentified * frames in "big endian dword" order. Regardless of host endian this * is always a swab32()-per-dword conversion of the standard definition, * i.e. single byte fields swapped and multi-byte fields in little- * endian */ static inline void sci_swab32_cpy(void *_dest, void *_src, ssize_t word_cnt) { u32 *dest = _dest, *src = _src; while (--word_cnt >= 0) dest[word_cnt] = swab32(src[word_cnt]); } extern unsigned char no_outbound_task_to; extern u16 ssp_max_occ_to; extern u16 stp_max_occ_to; extern u16 ssp_inactive_to; extern u16 stp_inactive_to; extern unsigned char phy_gen; extern unsigned char max_concurr_spinup; extern uint cable_selection_override; irqreturn_t isci_msix_isr(int vec, void *data); irqreturn_t isci_intx_isr(int vec, void *data); irqreturn_t isci_error_isr(int vec, void *data); /* * Each timer is associated with a cancellation flag that is set when * del_timer() is called and checked in the timer callback function. This * is needed since del_timer_sync() cannot be called with sci_lock held. * For deinit however, del_timer_sync() is used without holding the lock. */ struct sci_timer { struct timer_list timer; bool cancel; }; static inline void sci_init_timer(struct sci_timer *tmr, void (*fn)(unsigned long)) { tmr->timer.function = fn; tmr->timer.data = (unsigned long) tmr; tmr->cancel = 0; init_timer(&tmr->timer); } static inline void sci_mod_timer(struct sci_timer *tmr, unsigned long msec) { tmr->cancel = 0; mod_timer(&tmr->timer, jiffies + msecs_to_jiffies(msec)); } static inline void sci_del_timer(struct sci_timer *tmr) { tmr->cancel = 1; del_timer(&tmr->timer); } struct sci_base_state_machine { const struct sci_base_state *state_table; u32 initial_state_id; u32 current_state_id; u32 previous_state_id; }; typedef void (*sci_state_transition_t)(struct sci_base_state_machine *sm); struct sci_base_state { sci_state_transition_t enter_state; /* Called on state entry */ sci_state_transition_t exit_state; /* Called on state exit */ }; extern void sci_init_sm(struct sci_base_state_machine *sm, const struct sci_base_state *state_table, u32 initial_state); extern void sci_change_state(struct sci_base_state_machine *sm, u32 next_state); #endif /* __ISCI_H__ */