/* * Samsung EXYNOS5 SoC series USB DRD PHY driver * * Phy provider for USB 3.0 DRD controller on Exynos5 SoC series * * Copyright (C) 2014 Samsung Electronics Co., Ltd. * Author: Vivek Gautam * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Exynos USB PHY registers */ #define EXYNOS5_FSEL_9MHZ6 0x0 #define EXYNOS5_FSEL_10MHZ 0x1 #define EXYNOS5_FSEL_12MHZ 0x2 #define EXYNOS5_FSEL_19MHZ2 0x3 #define EXYNOS5_FSEL_20MHZ 0x4 #define EXYNOS5_FSEL_24MHZ 0x5 #define EXYNOS5_FSEL_50MHZ 0x7 /* EXYNOS5: USB 3.0 DRD PHY registers */ #define EXYNOS5_DRD_LINKSYSTEM 0x04 #define LINKSYSTEM_FLADJ_MASK (0x3f << 1) #define LINKSYSTEM_FLADJ(_x) ((_x) << 1) #define LINKSYSTEM_XHCI_VERSION_CONTROL BIT(27) #define EXYNOS5_DRD_PHYUTMI 0x08 #define PHYUTMI_OTGDISABLE BIT(6) #define PHYUTMI_FORCESUSPEND BIT(1) #define PHYUTMI_FORCESLEEP BIT(0) #define EXYNOS5_DRD_PHYPIPE 0x0c #define EXYNOS5_DRD_PHYCLKRST 0x10 #define PHYCLKRST_EN_UTMISUSPEND BIT(31) #define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23) #define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23) #define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21) #define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21) #define PHYCLKRST_SSC_EN BIT(20) #define PHYCLKRST_REF_SSP_EN BIT(19) #define PHYCLKRST_REF_CLKDIV2 BIT(18) #define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11) #define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11) #define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x32 << 11) #define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11) #define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11) #define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11) #define PHYCLKRST_FSEL_UTMI_MASK (0x7 << 5) #define PHYCLKRST_FSEL_PIPE_MASK (0x7 << 8) #define PHYCLKRST_FSEL(_x) ((_x) << 5) #define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5) #define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5) #define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5) #define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5) #define PHYCLKRST_RETENABLEN BIT(4) #define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2) #define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2) #define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2) #define PHYCLKRST_PORTRESET BIT(1) #define PHYCLKRST_COMMONONN BIT(0) #define EXYNOS5_DRD_PHYREG0 0x14 #define EXYNOS5_DRD_PHYREG1 0x18 #define EXYNOS5_DRD_PHYPARAM0 0x1c #define PHYPARAM0_REF_USE_PAD BIT(31) #define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26) #define PHYPARAM0_REF_LOSLEVEL (0x9 << 26) #define EXYNOS5_DRD_PHYPARAM1 0x20 #define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) #define PHYPARAM1_PCS_TXDEEMPH (0x1c) #define EXYNOS5_DRD_PHYTERM 0x24 #define EXYNOS5_DRD_PHYTEST 0x28 #define PHYTEST_POWERDOWN_SSP BIT(3) #define PHYTEST_POWERDOWN_HSP BIT(2) #define EXYNOS5_DRD_PHYADP 0x2c #define EXYNOS5_DRD_PHYUTMICLKSEL 0x30 #define PHYUTMICLKSEL_UTMI_CLKSEL BIT(2) #define EXYNOS5_DRD_PHYRESUME 0x34 #define EXYNOS5_DRD_LINKPORT 0x44 #define KHZ 1000 #define MHZ (KHZ * KHZ) enum exynos5_usbdrd_phy_id { EXYNOS5_DRDPHY_UTMI, EXYNOS5_DRDPHY_PIPE3, EXYNOS5_DRDPHYS_NUM, }; struct phy_usb_instance; struct exynos5_usbdrd_phy; struct exynos5_usbdrd_phy_config { u32 id; void (*phy_isol)(struct phy_usb_instance *inst, u32 on); void (*phy_init)(struct exynos5_usbdrd_phy *phy_drd); unsigned int (*set_refclk)(struct phy_usb_instance *inst); }; struct exynos5_usbdrd_phy_drvdata { const struct exynos5_usbdrd_phy_config *phy_cfg; u32 pmu_offset_usbdrd0_phy; u32 pmu_offset_usbdrd1_phy; bool has_common_clk_gate; }; /** * struct exynos5_usbdrd_phy - driver data for USB 3.0 PHY * @dev: pointer to device instance of this platform device * @reg_phy: usb phy controller register memory base * @clk: phy clock for register access * @pipeclk: clock for pipe3 phy * @utmiclk: clock for utmi+ phy * @itpclk: clock for ITP generation * @drv_data: pointer to SoC level driver data structure * @phys[]: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY * instances each with its 'phy' and 'phy_cfg'. * @extrefclk: frequency select settings when using 'separate * reference clocks' for SS and HS operations * @ref_clk: reference clock to PHY block from which PHY's * operational clocks are derived * vbus: VBUS regulator for phy * vbus_boost: Boost regulator for VBUS present on few Exynos boards */ struct exynos5_usbdrd_phy { struct device *dev; void __iomem *reg_phy; struct clk *clk; struct clk *pipeclk; struct clk *utmiclk; struct clk *itpclk; const struct exynos5_usbdrd_phy_drvdata *drv_data; struct phy_usb_instance { struct phy *phy; u32 index; struct regmap *reg_pmu; u32 pmu_offset; const struct exynos5_usbdrd_phy_config *phy_cfg; } phys[EXYNOS5_DRDPHYS_NUM]; u32 extrefclk; struct clk *ref_clk; struct regulator *vbus; struct regulator *vbus_boost; }; static inline struct exynos5_usbdrd_phy *to_usbdrd_phy(struct phy_usb_instance *inst) { return container_of((inst), struct exynos5_usbdrd_phy, phys[(inst)->index]); } /* * exynos5_rate_to_clk() converts the supplied clock rate to the value that * can be written to the phy register. */ static unsigned int exynos5_rate_to_clk(unsigned long rate, u32 *reg) { /* EXYNOS5_FSEL_MASK */ switch (rate) { case 9600 * KHZ: *reg = EXYNOS5_FSEL_9MHZ6; break; case 10 * MHZ: *reg = EXYNOS5_FSEL_10MHZ; break; case 12 * MHZ: *reg = EXYNOS5_FSEL_12MHZ; break; case 19200 * KHZ: *reg = EXYNOS5_FSEL_19MHZ2; break; case 20 * MHZ: *reg = EXYNOS5_FSEL_20MHZ; break; case 24 * MHZ: *reg = EXYNOS5_FSEL_24MHZ; break; case 50 * MHZ: *reg = EXYNOS5_FSEL_50MHZ; break; default: return -EINVAL; } return 0; } static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst, unsigned int on) { unsigned int val; if (!inst->reg_pmu) return; val = on ? 0 : EXYNOS5_PHY_ENABLE; regmap_update_bits(inst->reg_pmu, inst->pmu_offset, EXYNOS5_PHY_ENABLE, val); } /* * Sets the pipe3 phy's clk as EXTREFCLK (XXTI) which is internal clock * from clock core. Further sets multiplier values and spread spectrum * clock settings for SuperSpeed operations. */ static unsigned int exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst) { static u32 reg; struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); /* restore any previous reference clock settings */ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); /* Use EXTREFCLK as ref clock */ reg &= ~PHYCLKRST_REFCLKSEL_MASK; reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK; /* FSEL settings corresponding to reference clock */ reg &= ~PHYCLKRST_FSEL_PIPE_MASK | PHYCLKRST_MPLL_MULTIPLIER_MASK | PHYCLKRST_SSC_REFCLKSEL_MASK; switch (phy_drd->extrefclk) { case EXYNOS5_FSEL_50MHZ: reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF | PHYCLKRST_SSC_REFCLKSEL(0x00)); break; case EXYNOS5_FSEL_24MHZ: reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF | PHYCLKRST_SSC_REFCLKSEL(0x88)); break; case EXYNOS5_FSEL_20MHZ: reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF | PHYCLKRST_SSC_REFCLKSEL(0x00)); break; case EXYNOS5_FSEL_19MHZ2: reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF | PHYCLKRST_SSC_REFCLKSEL(0x88)); break; default: dev_dbg(phy_drd->dev, "unsupported ref clk\n"); break; } return reg; } /* * Sets the utmi phy's clk as EXTREFCLK (XXTI) which is internal clock * from clock core. Further sets the FSEL values for HighSpeed operations. */ static unsigned int exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst) { static u32 reg; struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); /* restore any previous reference clock settings */ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); reg &= ~PHYCLKRST_REFCLKSEL_MASK; reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK; reg &= ~PHYCLKRST_FSEL_UTMI_MASK | PHYCLKRST_MPLL_MULTIPLIER_MASK | PHYCLKRST_SSC_REFCLKSEL_MASK; reg |= PHYCLKRST_FSEL(phy_drd->extrefclk); return reg; } static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd) { u32 reg; reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); /* Set Tx De-Emphasis level */ reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; reg |= PHYPARAM1_PCS_TXDEEMPH; writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); reg &= ~PHYTEST_POWERDOWN_SSP; writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); } static void exynos5_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) { u32 reg; reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); /* Set Loss-of-Signal Detector sensitivity */ reg &= ~PHYPARAM0_REF_LOSLEVEL_MASK; reg |= PHYPARAM0_REF_LOSLEVEL; writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); /* Set Tx De-Emphasis level */ reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; reg |= PHYPARAM1_PCS_TXDEEMPH; writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); /* UTMI Power Control */ writel(PHYUTMI_OTGDISABLE, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); reg &= ~PHYTEST_POWERDOWN_HSP; writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); } static int exynos5_usbdrd_phy_init(struct phy *phy) { int ret; u32 reg; struct phy_usb_instance *inst = phy_get_drvdata(phy); struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); ret = clk_prepare_enable(phy_drd->clk); if (ret) return ret; /* Reset USB 3.0 PHY */ writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYRESUME); /* * Setting the Frame length Adj value[6:1] to default 0x20 * See xHCI 1.0 spec, 5.2.4 */ reg = LINKSYSTEM_XHCI_VERSION_CONTROL | LINKSYSTEM_FLADJ(0x20); writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); /* Select PHY CLK source */ reg &= ~PHYPARAM0_REF_USE_PAD; writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); /* This bit must be set for both HS and SS operations */ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL); reg |= PHYUTMICLKSEL_UTMI_CLKSEL; writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL); /* UTMI or PIPE3 specific init */ inst->phy_cfg->phy_init(phy_drd); /* reference clock settings */ reg = inst->phy_cfg->set_refclk(inst); /* Digital power supply in normal operating mode */ reg |= PHYCLKRST_RETENABLEN | /* Enable ref clock for SS function */ PHYCLKRST_REF_SSP_EN | /* Enable spread spectrum */ PHYCLKRST_SSC_EN | /* Power down HS Bias and PLL blocks in suspend mode */ PHYCLKRST_COMMONONN | /* Reset the port */ PHYCLKRST_PORTRESET; writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); udelay(10); reg &= ~PHYCLKRST_PORTRESET; writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); clk_disable_unprepare(phy_drd->clk); return 0; } static int exynos5_usbdrd_phy_exit(struct phy *phy) { int ret; u32 reg; struct phy_usb_instance *inst = phy_get_drvdata(phy); struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); ret = clk_prepare_enable(phy_drd->clk); if (ret) return ret; reg = PHYUTMI_OTGDISABLE | PHYUTMI_FORCESUSPEND | PHYUTMI_FORCESLEEP; writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); /* Resetting the PHYCLKRST enable bits to reduce leakage current */ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); reg &= ~(PHYCLKRST_REF_SSP_EN | PHYCLKRST_SSC_EN | PHYCLKRST_COMMONONN); writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); /* Control PHYTEST to remove leakage current */ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); reg |= PHYTEST_POWERDOWN_SSP | PHYTEST_POWERDOWN_HSP; writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); clk_disable_unprepare(phy_drd->clk); return 0; } static int exynos5_usbdrd_phy_power_on(struct phy *phy) { int ret; struct phy_usb_instance *inst = phy_get_drvdata(phy); struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); dev_dbg(phy_drd->dev, "Request to power_on usbdrd_phy phy\n"); clk_prepare_enable(phy_drd->ref_clk); if (!phy_drd->drv_data->has_common_clk_gate) { clk_prepare_enable(phy_drd->pipeclk); clk_prepare_enable(phy_drd->utmiclk); clk_prepare_enable(phy_drd->itpclk); } /* Enable VBUS supply */ if (phy_drd->vbus_boost) { ret = regulator_enable(phy_drd->vbus_boost); if (ret) { dev_err(phy_drd->dev, "Failed to enable VBUS boost supply\n"); goto fail_vbus; } } if (phy_drd->vbus) { ret = regulator_enable(phy_drd->vbus); if (ret) { dev_err(phy_drd->dev, "Failed to enable VBUS supply\n"); goto fail_vbus_boost; } } /* Power-on PHY*/ inst->phy_cfg->phy_isol(inst, 0); return 0; fail_vbus_boost: if (phy_drd->vbus_boost) regulator_disable(phy_drd->vbus_boost); fail_vbus: clk_disable_unprepare(phy_drd->ref_clk); if (!phy_drd->drv_data->has_common_clk_gate) { clk_disable_unprepare(phy_drd->itpclk); clk_disable_unprepare(phy_drd->utmiclk); clk_disable_unprepare(phy_drd->pipeclk); } return ret; } static int exynos5_usbdrd_phy_power_off(struct phy *phy) { struct phy_usb_instance *inst = phy_get_drvdata(phy); struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); dev_dbg(phy_drd->dev, "Request to power_off usbdrd_phy phy\n"); /* Power-off the PHY */ inst->phy_cfg->phy_isol(inst, 1); /* Disable VBUS supply */ if (phy_drd->vbus) regulator_disable(phy_drd->vbus); if (phy_drd->vbus_boost) regulator_disable(phy_drd->vbus_boost); clk_disable_unprepare(phy_drd->ref_clk); if (!phy_drd->drv_data->has_common_clk_gate) { clk_disable_unprepare(phy_drd->itpclk); clk_disable_unprepare(phy_drd->pipeclk); clk_disable_unprepare(phy_drd->utmiclk); } return 0; } static struct phy *exynos5_usbdrd_phy_xlate(struct device *dev, struct of_phandle_args *args) { struct exynos5_usbdrd_phy *phy_drd = dev_get_drvdata(dev); if (WARN_ON(args->args[0] >= EXYNOS5_DRDPHYS_NUM)) return ERR_PTR(-ENODEV); return phy_drd->phys[args->args[0]].phy; } static const struct phy_ops exynos5_usbdrd_phy_ops = { .init = exynos5_usbdrd_phy_init, .exit = exynos5_usbdrd_phy_exit, .power_on = exynos5_usbdrd_phy_power_on, .power_off = exynos5_usbdrd_phy_power_off, .owner = THIS_MODULE, }; static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd) { unsigned long ref_rate; int ret; phy_drd->clk = devm_clk_get(phy_drd->dev, "phy"); if (IS_ERR(phy_drd->clk)) { dev_err(phy_drd->dev, "Failed to get phy clock\n"); return PTR_ERR(phy_drd->clk); } phy_drd->ref_clk = devm_clk_get(phy_drd->dev, "ref"); if (IS_ERR(phy_drd->ref_clk)) { dev_err(phy_drd->dev, "Failed to get phy reference clock\n"); return PTR_ERR(phy_drd->ref_clk); } ref_rate = clk_get_rate(phy_drd->ref_clk); ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk); if (ret) { dev_err(phy_drd->dev, "Clock rate (%ld) not supported\n", ref_rate); return ret; } if (!phy_drd->drv_data->has_common_clk_gate) { phy_drd->pipeclk = devm_clk_get(phy_drd->dev, "phy_pipe"); if (IS_ERR(phy_drd->pipeclk)) { dev_info(phy_drd->dev, "PIPE3 phy operational clock not specified\n"); phy_drd->pipeclk = NULL; } phy_drd->utmiclk = devm_clk_get(phy_drd->dev, "phy_utmi"); if (IS_ERR(phy_drd->utmiclk)) { dev_info(phy_drd->dev, "UTMI phy operational clock not specified\n"); phy_drd->utmiclk = NULL; } phy_drd->itpclk = devm_clk_get(phy_drd->dev, "itp"); if (IS_ERR(phy_drd->itpclk)) { dev_info(phy_drd->dev, "ITP clock from main OSC not specified\n"); phy_drd->itpclk = NULL; } } return 0; } static const struct exynos5_usbdrd_phy_config phy_cfg_exynos5[] = { { .id = EXYNOS5_DRDPHY_UTMI, .phy_isol = exynos5_usbdrd_phy_isol, .phy_init = exynos5_usbdrd_utmi_init, .set_refclk = exynos5_usbdrd_utmi_set_refclk, }, { .id = EXYNOS5_DRDPHY_PIPE3, .phy_isol = exynos5_usbdrd_phy_isol, .phy_init = exynos5_usbdrd_pipe3_init, .set_refclk = exynos5_usbdrd_pipe3_set_refclk, }, }; static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = { .phy_cfg = phy_cfg_exynos5, .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, .pmu_offset_usbdrd1_phy = EXYNOS5420_USBDRD1_PHY_CONTROL, .has_common_clk_gate = true, }; static const struct exynos5_usbdrd_phy_drvdata exynos5250_usbdrd_phy = { .phy_cfg = phy_cfg_exynos5, .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, .has_common_clk_gate = true, }; static const struct exynos5_usbdrd_phy_drvdata exynos5433_usbdrd_phy = { .phy_cfg = phy_cfg_exynos5, .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, .pmu_offset_usbdrd1_phy = EXYNOS5433_USBHOST30_PHY_CONTROL, .has_common_clk_gate = false, }; static const struct exynos5_usbdrd_phy_drvdata exynos7_usbdrd_phy = { .phy_cfg = phy_cfg_exynos5, .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, .has_common_clk_gate = false, }; static const struct of_device_id exynos5_usbdrd_phy_of_match[] = { { .compatible = "samsung,exynos5250-usbdrd-phy", .data = &exynos5250_usbdrd_phy }, { .compatible = "samsung,exynos5420-usbdrd-phy", .data = &exynos5420_usbdrd_phy }, { .compatible = "samsung,exynos5433-usbdrd-phy", .data = &exynos5433_usbdrd_phy }, { .compatible = "samsung,exynos7-usbdrd-phy", .data = &exynos7_usbdrd_phy }, { }, }; MODULE_DEVICE_TABLE(of, exynos5_usbdrd_phy_of_match); static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *node = dev->of_node; struct exynos5_usbdrd_phy *phy_drd; struct phy_provider *phy_provider; struct resource *res; const struct of_device_id *match; const struct exynos5_usbdrd_phy_drvdata *drv_data; struct regmap *reg_pmu; u32 pmu_offset; int i, ret; int channel; phy_drd = devm_kzalloc(dev, sizeof(*phy_drd), GFP_KERNEL); if (!phy_drd) return -ENOMEM; dev_set_drvdata(dev, phy_drd); phy_drd->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); phy_drd->reg_phy = devm_ioremap_resource(dev, res); if (IS_ERR(phy_drd->reg_phy)) return PTR_ERR(phy_drd->reg_phy); match = of_match_node(exynos5_usbdrd_phy_of_match, pdev->dev.of_node); drv_data = match->data; phy_drd->drv_data = drv_data; ret = exynos5_usbdrd_phy_clk_handle(phy_drd); if (ret) { dev_err(dev, "Failed to initialize clocks\n"); return ret; } reg_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, "samsung,pmu-syscon"); if (IS_ERR(reg_pmu)) { dev_err(dev, "Failed to lookup PMU regmap\n"); return PTR_ERR(reg_pmu); } /* * Exynos5420 SoC has multiple channels for USB 3.0 PHY, with * each having separate power control registers. * 'channel' facilitates to set such registers. */ channel = of_alias_get_id(node, "usbdrdphy"); if (channel < 0) dev_dbg(dev, "Not a multi-controller usbdrd phy\n"); switch (channel) { case 1: pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd1_phy; break; case 0: default: pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd0_phy; break; } /* Get Vbus regulators */ phy_drd->vbus = devm_regulator_get(dev, "vbus"); if (IS_ERR(phy_drd->vbus)) { ret = PTR_ERR(phy_drd->vbus); if (ret == -EPROBE_DEFER) return ret; dev_warn(dev, "Failed to get VBUS supply regulator\n"); phy_drd->vbus = NULL; } phy_drd->vbus_boost = devm_regulator_get(dev, "vbus-boost"); if (IS_ERR(phy_drd->vbus_boost)) { ret = PTR_ERR(phy_drd->vbus_boost); if (ret == -EPROBE_DEFER) return ret; dev_warn(dev, "Failed to get VBUS boost supply regulator\n"); phy_drd->vbus_boost = NULL; } dev_vdbg(dev, "Creating usbdrd_phy phy\n"); for (i = 0; i < EXYNOS5_DRDPHYS_NUM; i++) { struct phy *phy = devm_phy_create(dev, NULL, &exynos5_usbdrd_phy_ops); if (IS_ERR(phy)) { dev_err(dev, "Failed to create usbdrd_phy phy\n"); return PTR_ERR(phy); } phy_drd->phys[i].phy = phy; phy_drd->phys[i].index = i; phy_drd->phys[i].reg_pmu = reg_pmu; phy_drd->phys[i].pmu_offset = pmu_offset; phy_drd->phys[i].phy_cfg = &drv_data->phy_cfg[i]; phy_set_drvdata(phy, &phy_drd->phys[i]); } phy_provider = devm_of_phy_provider_register(dev, exynos5_usbdrd_phy_xlate); if (IS_ERR(phy_provider)) { dev_err(phy_drd->dev, "Failed to register phy provider\n"); return PTR_ERR(phy_provider); } return 0; } static struct platform_driver exynos5_usb3drd_phy = { .probe = exynos5_usbdrd_phy_probe, .driver = { .of_match_table = exynos5_usbdrd_phy_of_match, .name = "exynos5_usb3drd_phy", } }; module_platform_driver(exynos5_usb3drd_phy); MODULE_DESCRIPTION("Samsung EXYNOS5 SoCs USB 3.0 DRD controller PHY driver"); MODULE_AUTHOR("Vivek Gautam "); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:exynos5_usb3drd_phy");