/****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, * USA * * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. *****************************************************************************/ #ifndef __iwl_core_h__ #define __iwl_core_h__ #include "iwl-dev.h" #include "iwl-io.h" /************************ * forward declarations * ************************/ struct iwl_host_cmd; struct iwl_cmd; #define TIME_UNIT 1024 struct iwl_lib_ops { /* set hw dependent parameters */ int (*set_hw_params)(struct iwl_priv *priv); /* setup BT Rx handler */ void (*bt_rx_handler_setup)(struct iwl_priv *priv); /* setup BT related deferred work */ void (*bt_setup_deferred_work)(struct iwl_priv *priv); /* cancel deferred work */ void (*cancel_deferred_work)(struct iwl_priv *priv); int (*set_channel_switch)(struct iwl_priv *priv, struct ieee80211_channel_switch *ch_switch); /* device specific configuration */ void (*nic_config)(struct iwl_priv *priv); /* eeprom operations (as defined in iwl-eeprom.h) */ struct iwl_eeprom_ops eeprom_ops; /* temperature */ void (*temperature)(struct iwl_priv *priv); }; /* * @max_ll_items: max number of OTP blocks * @shadow_ram_support: shadow support for OTP memory * @led_compensation: compensate on the led on/off time per HW according * to the deviation to achieve the desired led frequency. * The detail algorithm is described in iwl-led.c * @chain_noise_num_beacons: number of beacons used to compute chain noise * @adv_thermal_throttle: support advance thermal throttle * @support_ct_kill_exit: support ct kill exit condition * @support_wimax_coexist: support wimax/wifi co-exist * @plcp_delta_threshold: plcp error rate threshold used to trigger * radio tuning when there is a high receiving plcp error rate * @chain_noise_scale: default chain noise scale used for gain computation * @wd_timeout: TX queues watchdog timeout * @max_event_log_size: size of event log buffer size for ucode event logging * @shadow_reg_enable: HW shadhow register bit * @no_idle_support: do not support idle mode * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up */ struct iwl_base_params { int eeprom_size; int num_of_queues; /* def: HW dependent */ int num_of_ampdu_queues;/* def: HW dependent */ /* for iwl_apm_init() */ u32 pll_cfg_val; const u16 max_ll_items; const bool shadow_ram_support; u16 led_compensation; bool adv_thermal_throttle; bool support_ct_kill_exit; const bool support_wimax_coexist; u8 plcp_delta_threshold; s32 chain_noise_scale; unsigned int wd_timeout; u32 max_event_log_size; const bool shadow_reg_enable; const bool no_idle_support; const bool hd_v2; }; /* * @advanced_bt_coexist: support advanced bt coexist * @bt_init_traffic_load: specify initial bt traffic load * @bt_prio_boost: default bt priority boost value * @agg_time_limit: maximum number of uSec in aggregation * @ampdu_factor: Maximum A-MPDU length factor * @ampdu_density: Minimum A-MPDU spacing * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode */ struct iwl_bt_params { bool advanced_bt_coexist; u8 bt_init_traffic_load; u8 bt_prio_boost; u16 agg_time_limit; u8 ampdu_factor; u8 ampdu_density; bool bt_sco_disable; bool bt_session_2; }; /* * @use_rts_for_aggregation: use rts/cts protection for HT traffic */ struct iwl_ht_params { const bool ht_greenfield_support; /* if used set to true */ bool use_rts_for_aggregation; enum ieee80211_smps_mode smps_mode; }; /** * struct iwl_cfg * @name: Offical name of the device * @fw_name_pre: Firmware filename prefix. The api version and extension * (.ucode) will be added to filename before loading from disk. The * filename is constructed as fw_name_pre.ucode. * @ucode_api_max: Highest version of uCode API supported by driver. * @ucode_api_ok: oldest version of the uCode API that is OK to load * without a warning, for use in transitions * @ucode_api_min: Lowest version of uCode API supported by driver. * @valid_tx_ant: valid transmit antenna * @valid_rx_ant: valid receive antenna * @sku: sku information from EEPROM * @eeprom_ver: EEPROM version * @eeprom_calib_ver: EEPROM calibration version * @lib: pointer to the lib ops * @additional_nic_config: additional nic configuration * @base_params: pointer to basic parameters * @ht_params: point to ht patameters * @bt_params: pointer to bt parameters * @pa_type: used by 6000 series only to identify the type of Power Amplifier * @need_dc_calib: need to perform init dc calibration * @need_temp_offset_calib: need to perform temperature offset calibration * @scan_antennas: available antenna for scan operation * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off) * @adv_pm: advance power management * @rx_with_siso_diversity: 1x1 device with rx antenna diversity * @internal_wimax_coex: internal wifi/wimax combo device * @iq_invert: I/Q inversion * @temp_offset_v2: support v2 of temperature offset calibration * * We enable the driver to be backward compatible wrt API version. The * driver specifies which APIs it supports (with @ucode_api_max being the * highest and @ucode_api_min the lowest). Firmware will only be loaded if * it has a supported API version. * * The ideal usage of this infrastructure is to treat a new ucode API * release as a new hardware revision. */ struct iwl_cfg { /* params specific to an individual device within a device family */ const char *name; const char *fw_name_pre; const unsigned int ucode_api_max; const unsigned int ucode_api_ok; const unsigned int ucode_api_min; u8 valid_tx_ant; u8 valid_rx_ant; u16 sku; u16 eeprom_ver; u16 eeprom_calib_ver; const struct iwl_lib_ops *lib; void (*additional_nic_config)(struct iwl_priv *priv); /* params not likely to change within a device family */ struct iwl_base_params *base_params; /* params likely to change within a device family */ struct iwl_ht_params *ht_params; struct iwl_bt_params *bt_params; enum iwl_pa_type pa_type; /* if used set to IWL_PA_SYSTEM */ const bool need_dc_calib; /* if used set to true */ const bool need_temp_offset_calib; /* if used set to true */ u8 scan_rx_antennas[IEEE80211_NUM_BANDS]; enum iwl_led_mode led_mode; const bool adv_pm; const bool rx_with_siso_diversity; const bool internal_wimax_coex; const bool iq_invert; const bool temp_offset_v2; }; /*************************** * L i b * ***************************/ int iwlagn_mac_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue, const struct ieee80211_tx_queue_params *params); int iwlagn_mac_tx_last_beacon(struct ieee80211_hw *hw); void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx, int hw_decrypt); int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx); int iwl_full_rxon_required(struct iwl_priv *priv, struct iwl_rxon_context *ctx); int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch, struct iwl_rxon_context *ctx); void iwl_set_flags_for_band(struct iwl_priv *priv, struct iwl_rxon_context *ctx, enum ieee80211_band band, struct ieee80211_vif *vif); u8 iwl_get_single_channel_number(struct iwl_priv *priv, enum ieee80211_band band); void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf); bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, struct iwl_rxon_context *ctx, struct ieee80211_sta_ht_cap *ht_cap); void iwl_connection_init_rx_config(struct iwl_priv *priv, struct iwl_rxon_context *ctx); void iwl_set_rate(struct iwl_priv *priv); int iwlagn_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif); void iwlagn_mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif); int iwlagn_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum nl80211_iftype newtype, bool newp2p); int iwl_cmd_echo_test(struct iwl_priv *priv); #ifdef CONFIG_IWLWIFI_DEBUGFS int iwl_alloc_traffic_mem(struct iwl_priv *priv); void iwl_free_traffic_mem(struct iwl_priv *priv); void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv, u16 length, struct ieee80211_hdr *header); void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv, u16 length, struct ieee80211_hdr *header); const char *get_mgmt_string(int cmd); const char *get_ctrl_string(int cmd); void iwl_clear_traffic_stats(struct iwl_priv *priv); void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc, u16 len); #else static inline int iwl_alloc_traffic_mem(struct iwl_priv *priv) { return 0; } static inline void iwl_free_traffic_mem(struct iwl_priv *priv) { } static inline void iwl_reset_traffic_log(struct iwl_priv *priv) { } static inline void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv, u16 length, struct ieee80211_hdr *header) { } static inline void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv, u16 length, struct ieee80211_hdr *header) { } static inline void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc, u16 len) { } #endif /***************************************************** * RX ******************************************************/ void iwl_chswitch_done(struct iwl_priv *priv, bool is_success); void iwl_setup_watchdog(struct iwl_priv *priv); /***************************************************** * TX power ****************************************************/ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force); /******************************************************************************* * Scanning ******************************************************************************/ void iwl_init_scan_params(struct iwl_priv *priv); int iwl_scan_cancel(struct iwl_priv *priv); void iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms); void iwl_force_scan_end(struct iwl_priv *priv); int iwlagn_mac_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct cfg80211_scan_request *req); void iwl_internal_short_hw_scan(struct iwl_priv *priv); int iwl_force_reset(struct iwl_priv *priv, int mode, bool external); u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame, const u8 *ta, const u8 *ie, int ie_len, int left); void iwl_setup_rx_scan_handlers(struct iwl_priv *priv); void iwl_setup_scan_deferred_work(struct iwl_priv *priv); void iwl_cancel_scan_deferred_work(struct iwl_priv *priv); int __must_check iwl_scan_initiate(struct iwl_priv *priv, struct ieee80211_vif *vif, enum iwl_scan_type scan_type, enum ieee80211_band band); /* For faster active scanning, scan will move to the next channel if fewer than * PLCP_QUIET_THRESH packets are heard on this channel within * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell * time if it's a quiet channel (nothing responded to our probe, and there's * no other traffic). * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */ #define IWL_ACTIVE_QUIET_TIME cpu_to_le16(10) /* msec */ #define IWL_PLCP_QUIET_THRESH cpu_to_le16(1) /* packets */ #define IWL_SCAN_CHECK_WATCHDOG (HZ * 7) /***************************************************** * S e n d i n g H o s t C o m m a n d s * *****************************************************/ void iwl_bg_watchdog(unsigned long data); u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, u32 beacon_interval); __le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base, u32 addon, u32 beacon_interval); /***************************************************** * GEOS ******************************************************/ int iwl_init_geos(struct iwl_priv *priv); void iwl_free_geos(struct iwl_priv *priv); extern void iwl_send_bt_config(struct iwl_priv *priv); extern int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear); int iwl_send_rxon_timing(struct iwl_priv *priv, struct iwl_rxon_context *ctx); static inline const struct ieee80211_supported_band *iwl_get_hw_mode( struct iwl_priv *priv, enum ieee80211_band band) { return priv->hw->wiphy->bands[band]; } static inline bool iwl_advanced_bt_coexist(struct iwl_priv *priv) { return priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist; } static inline void iwl_enable_rfkill_int(struct iwl_priv *priv) { IWL_DEBUG_ISR(priv, "Enabling rfkill interrupt\n"); iwl_write32(bus(priv), CSR_INT_MASK, CSR_INT_BIT_RF_KILL); } extern bool bt_siso_mode; #endif /* __iwl_core_h__ */