/* * Intel Wireless WiMAX Connection 2400m * USB-specific i2400m driver definitions * * * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * * Intel Corporation * Inaky Perez-Gonzalez * Yanir Lubetkin * - Initial implementation * * * This driver implements the bus-specific part of the i2400m for * USB. Check i2400m.h for a generic driver description. * * ARCHITECTURE * * This driver listens to notifications sent from the notification * endpoint (in usb-notif.c); when data is ready to read, the code in * there schedules a read from the device (usb-rx.c) and then passes * the data to the generic RX code (rx.c). * * When the generic driver needs to send data (network or control), it * queues up in the TX FIFO (tx.c) and that will notify the driver * through the i2400m->bus_tx_kick() callback * (usb-tx.c:i2400mu_bus_tx_kick) which will send the items in the * FIFO queue. * * This driver, as well, implements the USB-specific ops for the generic * driver to be able to setup/teardown communication with the device * [i2400m_bus_dev_start() and i2400m_bus_dev_stop()], reseting the * device [i2400m_bus_reset()] and performing firmware upload * [i2400m_bus_bm_cmd() and i2400_bus_bm_wait_for_ack()]. */ #ifndef __I2400M_USB_H__ #define __I2400M_USB_H__ #include "i2400m.h" #include /* * Error Density Count: cheapo error density (over time) counter * * Originally by Reinette Chatre * * Embed an 'struct edc' somewhere. Each time there is a soft or * retryable error, call edc_inc() and check if the error top * watermark has been reached. */ enum { EDC_MAX_ERRORS = 10, EDC_ERROR_TIMEFRAME = HZ, }; /* error density counter */ struct edc { unsigned long timestart; u16 errorcount; }; struct i2400m_endpoint_cfg { unsigned char bulk_out; unsigned char notification; unsigned char reset_cold; unsigned char bulk_in; }; static inline void edc_init(struct edc *edc) { edc->timestart = jiffies; } /** * edc_inc - report a soft error and check if we are over the watermark * * @edc: pointer to error density counter. * @max_err: maximum number of errors we can accept over the timeframe * @timeframe: length of the timeframe (in jiffies). * * Returns: !0 1 if maximum acceptable errors per timeframe has been * exceeded. 0 otherwise. * * This is way to determine if the number of acceptable errors per time * period has been exceeded. It is not accurate as there are cases in which * this scheme will not work, for example if there are periodic occurrences * of errors that straddle updates to the start time. This scheme is * sufficient for our usage. * * To use, embed a 'struct edc' somewhere, initialize it with * edc_init() and when an error hits: * * if (do_something_fails_with_a_soft_error) { * if (edc_inc(&my->edc, MAX_ERRORS, MAX_TIMEFRAME)) * Ops, hard error, do something about it * else * Retry or ignore, depending on whatever * } */ static inline int edc_inc(struct edc *edc, u16 max_err, u16 timeframe) { unsigned long now; now = jiffies; if (now - edc->timestart > timeframe) { edc->errorcount = 1; edc->timestart = now; } else if (++edc->errorcount > max_err) { edc->errorcount = 0; edc->timestart = now; return 1; } return 0; } /* Host-Device interface for USB */ enum { I2400M_USB_BOOT_RETRIES = 3, I2400MU_MAX_NOTIFICATION_LEN = 256, I2400MU_BLK_SIZE = 16, I2400MU_PL_SIZE_MAX = 0x3EFF, /* Device IDs */ USB_DEVICE_ID_I6050 = 0x0186, USB_DEVICE_ID_I6050_2 = 0x0188, USB_DEVICE_ID_I6250 = 0x0187, }; /** * struct i2400mu - descriptor for a USB connected i2400m * * @i2400m: bus-generic i2400m implementation; has to be first (see * it's documentation in i2400m.h). * * @usb_dev: pointer to our USB device * * @usb_iface: pointer to our USB interface * * @urb_edc: error density counter; used to keep a density-on-time tab * on how many soft (retryable or ignorable) errors we get. If we * go over the threshold, we consider the bus transport is failing * too much and reset. * * @notif_urb: URB for receiving notifications from the device. * * @tx_kthread: thread we use for data TX. We use a thread because in * order to do deep power saving and put the device to sleep, we * need to call usb_autopm_*() [blocking functions]. * * @tx_wq: waitqueue for the TX kthread to sleep when there is no data * to be sent; when more data is available, it is woken up by * i2400mu_bus_tx_kick(). * * @rx_kthread: thread we use for data RX. We use a thread because in * order to do deep power saving and put the device to sleep, we * need to call usb_autopm_*() [blocking functions]. * * @rx_wq: waitqueue for the RX kthread to sleep when there is no data * to receive. When data is available, it is woken up by * usb-notif.c:i2400mu_notification_grok(). * * @rx_pending_count: number of rx-data-ready notifications that were * still not handled by the RX kthread. * * @rx_size: current RX buffer size that is being used. * * @rx_size_acc: accumulator of the sizes of the previous read * transactions. * * @rx_size_cnt: number of read transactions accumulated in * @rx_size_acc. * * @do_autopm: disable(0)/enable(>0) calling the * usb_autopm_get/put_interface() barriers when executing * commands. See doc in i2400mu_suspend() for more information. * * @rx_size_auto_shrink: if true, the rx_size is shrunk * automatically based on the average size of the received * transactions. This allows the receive code to allocate smaller * chunks of memory and thus reduce pressure on the memory * allocator by not wasting so much space. By default it is * enabled. * * @debugfs_dentry: hookup for debugfs files. * These have to be in a separate directory, a child of * (wimax_dev->debugfs_dentry) so they can be removed when the * module unloads, as we don't keep each dentry. */ struct i2400mu { struct i2400m i2400m; /* FIRST! See doc */ struct usb_device *usb_dev; struct usb_interface *usb_iface; struct edc urb_edc; /* Error density counter */ struct i2400m_endpoint_cfg endpoint_cfg; struct urb *notif_urb; struct task_struct *tx_kthread; wait_queue_head_t tx_wq; struct task_struct *rx_kthread; wait_queue_head_t rx_wq; atomic_t rx_pending_count; size_t rx_size, rx_size_acc, rx_size_cnt; atomic_t do_autopm; u8 rx_size_auto_shrink; struct dentry *debugfs_dentry; unsigned i6050:1; /* 1 if this is a 6050 based SKU */ }; static inline void i2400mu_init(struct i2400mu *i2400mu) { i2400m_init(&i2400mu->i2400m); edc_init(&i2400mu->urb_edc); init_waitqueue_head(&i2400mu->tx_wq); atomic_set(&i2400mu->rx_pending_count, 0); init_waitqueue_head(&i2400mu->rx_wq); i2400mu->rx_size = PAGE_SIZE - sizeof(struct skb_shared_info); atomic_set(&i2400mu->do_autopm, 1); i2400mu->rx_size_auto_shrink = 1; } extern int i2400mu_notification_setup(struct i2400mu *); extern void i2400mu_notification_release(struct i2400mu *); extern int i2400mu_rx_setup(struct i2400mu *); extern void i2400mu_rx_release(struct i2400mu *); extern void i2400mu_rx_kick(struct i2400mu *); extern int i2400mu_tx_setup(struct i2400mu *); extern void i2400mu_tx_release(struct i2400mu *); extern void i2400mu_bus_tx_kick(struct i2400m *); extern ssize_t i2400mu_bus_bm_cmd_send(struct i2400m *, const struct i2400m_bootrom_header *, size_t, int); extern ssize_t i2400mu_bus_bm_wait_for_ack(struct i2400m *, struct i2400m_bootrom_header *, size_t); #endif /* #ifndef __I2400M_USB_H__ */