/* Intel Ethernet Switch Host Interface Driver * Copyright(c) 2013 - 2014 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * The full GNU General Public License is included in this distribution in * the file called "COPYING". * * Contact Information: * e1000-devel Mailing List * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 */ #ifndef _FM10K_MBX_H_ #define _FM10K_MBX_H_ /* forward declaration */ struct fm10k_mbx_info; #include "fm10k_type.h" #include "fm10k_tlv.h" /* PF Mailbox Registers */ #define FM10K_MBMEM(_n) ((_n) + 0x18000) #define FM10K_MBMEM_VF(_n, _m) (((_n) * 0x10) + (_m) + 0x18000) #define FM10K_MBMEM_SM(_n) ((_n) + 0x18400) #define FM10K_MBMEM_PF(_n) ((_n) + 0x18600) /* XOR provides means of switching from Tx to Rx FIFO */ #define FM10K_MBMEM_PF_XOR (FM10K_MBMEM_SM(0) ^ FM10K_MBMEM_PF(0)) #define FM10K_MBX(_n) ((_n) + 0x18800) #define FM10K_MBX_REQ 0x00000002 #define FM10K_MBX_ACK 0x00000004 #define FM10K_MBX_REQ_INTERRUPT 0x00000008 #define FM10K_MBX_ACK_INTERRUPT 0x00000010 #define FM10K_MBX_INTERRUPT_ENABLE 0x00000020 #define FM10K_MBX_INTERRUPT_DISABLE 0x00000040 #define FM10K_MBICR(_n) ((_n) + 0x18840) #define FM10K_GMBX 0x18842 /* VF Mailbox Registers */ #define FM10K_VFMBX 0x00010 #define FM10K_VFMBMEM(_n) ((_n) + 0x00020) #define FM10K_VFMBMEM_LEN 16 #define FM10K_VFMBMEM_VF_XOR (FM10K_VFMBMEM_LEN / 2) /* Delays/timeouts */ #define FM10K_MBX_DISCONNECT_TIMEOUT 500 #define FM10K_MBX_POLL_DELAY 19 #define FM10K_MBX_INT_DELAY 20 /* PF/VF Mailbox state machine * * +----------+ connect() +----------+ * | CLOSED | --------------> | CONNECT | * +----------+ +----------+ * ^ ^ | * | rcv: rcv: | | rcv: * | Connect Disconnect | | Connect * | Disconnect Error | | Data * | | | * | | V * +----------+ disconnect() +----------+ * |DISCONNECT| <-------------- | OPEN | * +----------+ +----------+ * * The diagram above describes the PF/VF mailbox state machine. There * are four main states to this machine. * Closed: This state represents a mailbox that is in a standby state * with interrupts disabled. In this state the mailbox should not * read the mailbox or write any data. The only means of exiting * this state is for the system to make the connect() call for the * mailbox, it will then transition to the connect state. * Connect: In this state the mailbox is seeking a connection. It will * post a connect message with no specified destination and will * wait for a reply from the other side of the mailbox. This state * is exited when either a connect with the local mailbox as the * destination is received or when a data message is received with * a valid sequence number. * Open: In this state the mailbox is able to transfer data between the local * entity and the remote. It will fall back to connect in the event of * receiving either an error message, or a disconnect message. It will * transition to disconnect on a call to disconnect(); * Disconnect: In this state the mailbox is attempting to gracefully terminate * the connection. It will do so at the first point where it knows * that the remote endpoint is either done sending, or when the * remote endpoint has fallen back into connect. */ enum fm10k_mbx_state { FM10K_STATE_CLOSED, FM10K_STATE_CONNECT, FM10K_STATE_OPEN, FM10K_STATE_DISCONNECT, }; /* PF/VF Mailbox header format * 3 2 1 0 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * | Size/Err_no/CRC | Rsvd0 | Head | Tail | Type | * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * * The layout above describes the format for the header used in the PF/VF * mailbox. The header is broken out into the following fields: * Type: There are 4 supported message types * 0x8: Data header - used to transport message data * 0xC: Connect header - used to establish connection * 0xD: Disconnect header - used to tear down a connection * 0xE: Error header - used to address message exceptions * Tail: Tail index for local FIFO * Tail index actually consists of two parts. The MSB of * the head is a loop tracker, it is 0 on an even numbered * loop through the FIFO, and 1 on the odd numbered loops. * To get the actual mailbox offset based on the tail it * is necessary to add bit 3 to bit 0 and clear bit 3. This * gives us a valid range of 0x1 - 0xE. * Head: Head index for remote FIFO * Head index follows the same format as the tail index. * Rsvd0: Reserved 0 portion of the mailbox header * CRC: Running CRC for all data since connect plus current message header * Size: Maximum message size - Applies only to connect headers * The maximum message size is provided during connect to avoid * jamming the mailbox with messages that do not fit. * Err_no: Error number - Applies only to error headers * The error number provides a indication of the type of error * experienced. */ /* macros for retriving and setting header values */ #define FM10K_MSG_HDR_MASK(name) \ ((0x1u << FM10K_MSG_##name##_SIZE) - 1) #define FM10K_MSG_HDR_FIELD_SET(value, name) \ (((u32)(value) & FM10K_MSG_HDR_MASK(name)) << FM10K_MSG_##name##_SHIFT) #define FM10K_MSG_HDR_FIELD_GET(value, name) \ ((u16)((value) >> FM10K_MSG_##name##_SHIFT) & FM10K_MSG_HDR_MASK(name)) /* offsets shared between all headers */ #define FM10K_MSG_TYPE_SHIFT 0 #define FM10K_MSG_TYPE_SIZE 4 #define FM10K_MSG_TAIL_SHIFT 4 #define FM10K_MSG_TAIL_SIZE 4 #define FM10K_MSG_HEAD_SHIFT 8 #define FM10K_MSG_HEAD_SIZE 4 #define FM10K_MSG_RSVD0_SHIFT 12 #define FM10K_MSG_RSVD0_SIZE 4 /* offsets for data/disconnect headers */ #define FM10K_MSG_CRC_SHIFT 16 #define FM10K_MSG_CRC_SIZE 16 /* offsets for connect headers */ #define FM10K_MSG_CONNECT_SIZE_SHIFT 16 #define FM10K_MSG_CONNECT_SIZE_SIZE 16 /* offsets for error headers */ #define FM10K_MSG_ERR_NO_SHIFT 16 #define FM10K_MSG_ERR_NO_SIZE 16 enum fm10k_msg_type { FM10K_MSG_DATA = 0x8, FM10K_MSG_CONNECT = 0xC, FM10K_MSG_DISCONNECT = 0xD, FM10K_MSG_ERROR = 0xE, }; /* HNI/SM Mailbox FIFO format * 3 2 1 0 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 * +-------+-----------------------+-------+-----------------------+ * | Error | Remote Head |Version| Local Tail | * +-------+-----------------------+-------+-----------------------+ * | | * . Local FIFO Data . * . . * +-------+-----------------------+-------+-----------------------+ * * The layout above describes the format for the FIFOs used by the host * network interface and the switch manager to communicate messages back * and forth. Both the HNI and the switch maintain one such FIFO. The * layout in memory has the switch manager FIFO followed immediately by * the HNI FIFO. For this reason I am using just the pointer to the * HNI FIFO in the mailbox ops as the offset between the two is fixed. * * The header for the FIFO is broken out into the following fields: * Local Tail: Offset into FIFO region for next DWORD to write. * Version: Version info for mailbox, only values of 0/1 are supported. * Remote Head: Offset into remote FIFO to indicate how much we have read. * Error: Error indication, values TBD. */ /* version number for switch manager mailboxes */ #define FM10K_SM_MBX_VERSION 1 #define FM10K_SM_MBX_FIFO_LEN (FM10K_MBMEM_PF_XOR - 1) /* offsets shared between all SM FIFO headers */ #define FM10K_MSG_SM_TAIL_SHIFT 0 #define FM10K_MSG_SM_TAIL_SIZE 12 #define FM10K_MSG_SM_VER_SHIFT 12 #define FM10K_MSG_SM_VER_SIZE 4 #define FM10K_MSG_SM_HEAD_SHIFT 16 #define FM10K_MSG_SM_HEAD_SIZE 12 #define FM10K_MSG_SM_ERR_SHIFT 28 #define FM10K_MSG_SM_ERR_SIZE 4 /* All error messages returned by mailbox functions * The value -511 is 0xFE01 in hex. The idea is to order the errors * from 0xFE01 - 0xFEFF so error codes are easily visible in the mailbox * messages. This also helps to avoid error number collisions as Linux * doesn't appear to use error numbers 256 - 511. */ #define FM10K_MBX_ERR(_n) ((_n) - 512) #define FM10K_MBX_ERR_NO_MBX FM10K_MBX_ERR(0x01) #define FM10K_MBX_ERR_NO_SPACE FM10K_MBX_ERR(0x03) #define FM10K_MBX_ERR_TAIL FM10K_MBX_ERR(0x05) #define FM10K_MBX_ERR_HEAD FM10K_MBX_ERR(0x06) #define FM10K_MBX_ERR_SRC FM10K_MBX_ERR(0x08) #define FM10K_MBX_ERR_TYPE FM10K_MBX_ERR(0x09) #define FM10K_MBX_ERR_SIZE FM10K_MBX_ERR(0x0B) #define FM10K_MBX_ERR_BUSY FM10K_MBX_ERR(0x0C) #define FM10K_MBX_ERR_RSVD0 FM10K_MBX_ERR(0x0E) #define FM10K_MBX_ERR_CRC FM10K_MBX_ERR(0x0F) #define FM10K_MBX_CRC_SEED 0xFFFF struct fm10k_mbx_ops { s32 (*connect)(struct fm10k_hw *, struct fm10k_mbx_info *); void (*disconnect)(struct fm10k_hw *, struct fm10k_mbx_info *); bool (*rx_ready)(struct fm10k_mbx_info *); bool (*tx_ready)(struct fm10k_mbx_info *, u16); bool (*tx_complete)(struct fm10k_mbx_info *); s32 (*enqueue_tx)(struct fm10k_hw *, struct fm10k_mbx_info *, const u32 *); s32 (*process)(struct fm10k_hw *, struct fm10k_mbx_info *); s32 (*register_handlers)(struct fm10k_mbx_info *, const struct fm10k_msg_data *); }; struct fm10k_mbx_fifo { u32 *buffer; u16 head; u16 tail; u16 size; }; /* size of buffer to be stored in mailbox for FIFOs */ #define FM10K_MBX_TX_BUFFER_SIZE 512 #define FM10K_MBX_RX_BUFFER_SIZE 128 #define FM10K_MBX_BUFFER_SIZE \ (FM10K_MBX_TX_BUFFER_SIZE + FM10K_MBX_RX_BUFFER_SIZE) /* minimum and maximum message size in dwords */ #define FM10K_MBX_MSG_MAX_SIZE \ ((FM10K_MBX_TX_BUFFER_SIZE - 1) & (FM10K_MBX_RX_BUFFER_SIZE - 1)) #define FM10K_VFMBX_MSG_MTU ((FM10K_VFMBMEM_LEN / 2) - 1) #define FM10K_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */ #define FM10K_MBX_INIT_DELAY 500 /* microseconds between retries */ struct fm10k_mbx_info { /* function pointers for mailbox operations */ struct fm10k_mbx_ops ops; const struct fm10k_msg_data *msg_data; /* message FIFOs */ struct fm10k_mbx_fifo rx; struct fm10k_mbx_fifo tx; /* delay for handling timeouts */ u32 timeout; u32 udelay; /* mailbox state info */ u32 mbx_reg, mbmem_reg, mbx_lock, mbx_hdr; u16 max_size, mbmem_len; u16 tail, tail_len, pulled; u16 head, head_len, pushed; u16 local, remote; enum fm10k_mbx_state state; /* result of last mailbox test */ s32 test_result; /* statistics */ u64 tx_busy; u64 tx_dropped; u64 tx_messages; u64 tx_dwords; u64 rx_messages; u64 rx_dwords; u64 rx_parse_err; /* Buffer to store messages */ u32 buffer[FM10K_MBX_BUFFER_SIZE]; }; s32 fm10k_pfvf_mbx_init(struct fm10k_hw *, struct fm10k_mbx_info *, const struct fm10k_msg_data *, u8); s32 fm10k_sm_mbx_init(struct fm10k_hw *, struct fm10k_mbx_info *, const struct fm10k_msg_data *); #endif /* _FM10K_MBX_H_ */