/* * Freescale IMX AHCI SATA platform driver * Copyright 2013 Freescale Semiconductor, Inc. * * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program. If not, see . */ #include #include #include #include #include #include #include #include #include "ahci.h" enum { HOST_TIMER1MS = 0xe0, /* Timer 1-ms */ }; struct imx_ahci_priv { struct platform_device *ahci_pdev; struct clk *sata_ref_clk; struct clk *ahb_clk; struct regmap *gpr; }; static int imx6q_sata_init(struct device *dev, void __iomem *mmio) { int ret = 0; unsigned int reg_val; struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); imxpriv->gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); if (IS_ERR(imxpriv->gpr)) { dev_err(dev, "failed to find fsl,imx6q-iomux-gpr regmap\n"); return PTR_ERR(imxpriv->gpr); } ret = clk_prepare_enable(imxpriv->sata_ref_clk); if (ret < 0) { dev_err(dev, "prepare-enable sata_ref clock err:%d\n", ret); return ret; } /* * set PHY Paremeters, two steps to configure the GPR13, * one write for rest of parameters, mask of first write * is 0x07fffffd, and the other one write for setting * the mpll_clk_en. */ regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK | IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK | IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK | IMX6Q_GPR13_SATA_SPD_MODE_MASK | IMX6Q_GPR13_SATA_MPLL_SS_EN | IMX6Q_GPR13_SATA_TX_ATTEN_MASK | IMX6Q_GPR13_SATA_TX_BOOST_MASK | IMX6Q_GPR13_SATA_TX_LVL_MASK | IMX6Q_GPR13_SATA_TX_EDGE_RATE , IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB | IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M | IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F | IMX6Q_GPR13_SATA_SPD_MODE_3P0G | IMX6Q_GPR13_SATA_MPLL_SS_EN | IMX6Q_GPR13_SATA_TX_ATTEN_9_16 | IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB | IMX6Q_GPR13_SATA_TX_LVL_1_025_V); regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN, IMX6Q_GPR13_SATA_MPLL_CLK_EN); usleep_range(100, 200); /* * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL, * and IP vendor specific register HOST_TIMER1MS. * Configure CAP_SSS (support stagered spin up). * Implement the port0. * Get the ahb clock rate, and configure the TIMER1MS register. */ reg_val = readl(mmio + HOST_CAP); if (!(reg_val & HOST_CAP_SSS)) { reg_val |= HOST_CAP_SSS; writel(reg_val, mmio + HOST_CAP); } reg_val = readl(mmio + HOST_PORTS_IMPL); if (!(reg_val & 0x1)) { reg_val |= 0x1; writel(reg_val, mmio + HOST_PORTS_IMPL); } reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000; writel(reg_val, mmio + HOST_TIMER1MS); return 0; } static void imx6q_sata_exit(struct device *dev) { struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN, !IMX6Q_GPR13_SATA_MPLL_CLK_EN); clk_disable_unprepare(imxpriv->sata_ref_clk); } static struct ahci_platform_data imx6q_sata_pdata = { .init = imx6q_sata_init, .exit = imx6q_sata_exit, }; static const struct of_device_id imx_ahci_of_match[] = { { .compatible = "fsl,imx6q-ahci", .data = &imx6q_sata_pdata}, {}, }; MODULE_DEVICE_TABLE(of, imx_ahci_of_match); static int imx_ahci_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct resource *mem, *irq, res[2]; const struct of_device_id *of_id; const struct ahci_platform_data *pdata = NULL; struct imx_ahci_priv *imxpriv; struct device *ahci_dev; struct platform_device *ahci_pdev; int ret; imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL); if (!imxpriv) { dev_err(dev, "can't alloc ahci_host_priv\n"); return -ENOMEM; } ahci_pdev = platform_device_alloc("ahci", -1); if (!ahci_pdev) return -ENODEV; ahci_dev = &ahci_pdev->dev; ahci_dev->parent = dev; imxpriv->ahb_clk = devm_clk_get(dev, "ahb"); if (IS_ERR(imxpriv->ahb_clk)) { dev_err(dev, "can't get ahb clock.\n"); ret = PTR_ERR(imxpriv->ahb_clk); goto err_out; } imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref"); if (IS_ERR(imxpriv->sata_ref_clk)) { dev_err(dev, "can't get sata_ref clock.\n"); ret = PTR_ERR(imxpriv->sata_ref_clk); goto err_out; } imxpriv->ahci_pdev = ahci_pdev; platform_set_drvdata(pdev, imxpriv); of_id = of_match_device(imx_ahci_of_match, dev); if (of_id) { pdata = of_id->data; } else { ret = -EINVAL; goto err_out; } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!mem || !irq) { dev_err(dev, "no mmio/irq resource\n"); ret = -ENOMEM; goto err_out; } res[0] = *mem; res[1] = *irq; ahci_dev->coherent_dma_mask = DMA_BIT_MASK(32); ahci_dev->dma_mask = &ahci_dev->coherent_dma_mask; ahci_dev->of_node = dev->of_node; ret = platform_device_add_resources(ahci_pdev, res, 2); if (ret) goto err_out; ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata)); if (ret) goto err_out; ret = platform_device_add(ahci_pdev); if (ret) { err_out: platform_device_put(ahci_pdev); return ret; } return 0; } static int imx_ahci_remove(struct platform_device *pdev) { struct imx_ahci_priv *imxpriv = platform_get_drvdata(pdev); struct platform_device *ahci_pdev = imxpriv->ahci_pdev; platform_device_unregister(ahci_pdev); return 0; } static struct platform_driver imx_ahci_driver = { .probe = imx_ahci_probe, .remove = imx_ahci_remove, .driver = { .name = "ahci-imx", .owner = THIS_MODULE, .of_match_table = imx_ahci_of_match, }, }; module_platform_driver(imx_ahci_driver); MODULE_DESCRIPTION("Freescale i.MX AHCI SATA platform driver"); MODULE_AUTHOR("Richard Zhu "); MODULE_LICENSE("GPL"); MODULE_ALIAS("ahci:imx");