/******************************************************************************* * * Module Name: rscalc - Calculate stream and list lengths * ******************************************************************************/ /* * Copyright (C) 2000 - 2015, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include #include "accommon.h" #include "acresrc.h" #include "acnamesp.h" #define _COMPONENT ACPI_RESOURCES ACPI_MODULE_NAME("rscalc") /* Local prototypes */ static u8 acpi_rs_count_set_bits(u16 bit_field); static acpi_rs_length acpi_rs_struct_option_length(struct acpi_resource_source *resource_source); static u32 acpi_rs_stream_option_length(u32 resource_length, u32 minimum_total_length); /******************************************************************************* * * FUNCTION: acpi_rs_count_set_bits * * PARAMETERS: bit_field - Field in which to count bits * * RETURN: Number of bits set within the field * * DESCRIPTION: Count the number of bits set in a resource field. Used for * (Short descriptor) interrupt and DMA lists. * ******************************************************************************/ static u8 acpi_rs_count_set_bits(u16 bit_field) { u8 bits_set; ACPI_FUNCTION_ENTRY(); for (bits_set = 0; bit_field; bits_set++) { /* Zero the least significant bit that is set */ bit_field &= (u16) (bit_field - 1); } return (bits_set); } /******************************************************************************* * * FUNCTION: acpi_rs_struct_option_length * * PARAMETERS: resource_source - Pointer to optional descriptor field * * RETURN: Status * * DESCRIPTION: Common code to handle optional resource_source_index and * resource_source fields in some Large descriptors. Used during * list-to-stream conversion * ******************************************************************************/ static acpi_rs_length acpi_rs_struct_option_length(struct acpi_resource_source *resource_source) { ACPI_FUNCTION_ENTRY(); /* * If the resource_source string is valid, return the size of the string * (string_length includes the NULL terminator) plus the size of the * resource_source_index (1). */ if (resource_source->string_ptr) { return ((acpi_rs_length) (resource_source->string_length + 1)); } return (0); } /******************************************************************************* * * FUNCTION: acpi_rs_stream_option_length * * PARAMETERS: resource_length - Length from the resource header * minimum_total_length - Minimum length of this resource, before * any optional fields. Includes header size * * RETURN: Length of optional string (0 if no string present) * * DESCRIPTION: Common code to handle optional resource_source_index and * resource_source fields in some Large descriptors. Used during * stream-to-list conversion * ******************************************************************************/ static u32 acpi_rs_stream_option_length(u32 resource_length, u32 minimum_aml_resource_length) { u32 string_length = 0; ACPI_FUNCTION_ENTRY(); /* * The resource_source_index and resource_source are optional elements of some * Large-type resource descriptors. */ /* * If the length of the actual resource descriptor is greater than the ACPI * spec-defined minimum length, it means that a resource_source_index exists * and is followed by a (required) null terminated string. The string length * (including the null terminator) is the resource length minus the minimum * length, minus one byte for the resource_source_index itself. */ if (resource_length > minimum_aml_resource_length) { /* Compute the length of the optional string */ string_length = resource_length - minimum_aml_resource_length - 1; } /* * Round the length up to a multiple of the native word in order to * guarantee that the entire resource descriptor is native word aligned */ return ((u32) ACPI_ROUND_UP_TO_NATIVE_WORD(string_length)); } /******************************************************************************* * * FUNCTION: acpi_rs_get_aml_length * * PARAMETERS: resource - Pointer to the resource linked list * resource_list_size - Size of the resource linked list * size_needed - Where the required size is returned * * RETURN: Status * * DESCRIPTION: Takes a linked list of internal resource descriptors and * calculates the size buffer needed to hold the corresponding * external resource byte stream. * ******************************************************************************/ acpi_status acpi_rs_get_aml_length(struct acpi_resource *resource, acpi_size resource_list_size, acpi_size * size_needed) { acpi_size aml_size_needed = 0; struct acpi_resource *resource_end; acpi_rs_length total_size; ACPI_FUNCTION_TRACE(rs_get_aml_length); /* Traverse entire list of internal resource descriptors */ resource_end = ACPI_ADD_PTR(struct acpi_resource, resource, resource_list_size); while (resource < resource_end) { /* Validate the descriptor type */ if (resource->type > ACPI_RESOURCE_TYPE_MAX) { return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE); } /* Sanity check the length. It must not be zero, or we loop forever */ if (!resource->length) { return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH); } /* Get the base size of the (external stream) resource descriptor */ total_size = acpi_gbl_aml_resource_sizes[resource->type]; /* * Augment the base size for descriptors with optional and/or * variable-length fields */ switch (resource->type) { case ACPI_RESOURCE_TYPE_IRQ: /* Length can be 3 or 2 */ if (resource->data.irq.descriptor_length == 2) { total_size--; } break; case ACPI_RESOURCE_TYPE_START_DEPENDENT: /* Length can be 1 or 0 */ if (resource->data.irq.descriptor_length == 0) { total_size--; } break; case ACPI_RESOURCE_TYPE_VENDOR: /* * Vendor Defined Resource: * For a Vendor Specific resource, if the Length is between 1 and 7 * it will be created as a Small Resource data type, otherwise it * is a Large Resource data type. */ if (resource->data.vendor.byte_length > 7) { /* Base size of a Large resource descriptor */ total_size = sizeof(struct aml_resource_large_header); } /* Add the size of the vendor-specific data */ total_size = (acpi_rs_length) (total_size + resource->data.vendor.byte_length); break; case ACPI_RESOURCE_TYPE_END_TAG: /* * End Tag: * We are done -- return the accumulated total size. */ *size_needed = aml_size_needed + total_size; /* Normal exit */ return_ACPI_STATUS(AE_OK); case ACPI_RESOURCE_TYPE_ADDRESS16: /* * 16-Bit Address Resource: * Add the size of the optional resource_source info */ total_size = (acpi_rs_length) (total_size + acpi_rs_struct_option_length(&resource->data. address16. resource_source)); break; case ACPI_RESOURCE_TYPE_ADDRESS32: /* * 32-Bit Address Resource: * Add the size of the optional resource_source info */ total_size = (acpi_rs_length) (total_size + acpi_rs_struct_option_length(&resource->data. address32. resource_source)); break; case ACPI_RESOURCE_TYPE_ADDRESS64: /* * 64-Bit Address Resource: * Add the size of the optional resource_source info */ total_size = (acpi_rs_length) (total_size + acpi_rs_struct_option_length(&resource->data. address64. resource_source)); break; case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: /* * Extended IRQ Resource: * Add the size of each additional optional interrupt beyond the * required 1 (4 bytes for each u32 interrupt number) */ total_size = (acpi_rs_length) (total_size + ((resource->data.extended_irq.interrupt_count - 1) * 4) + /* Add the size of the optional resource_source info */ acpi_rs_struct_option_length(&resource->data. extended_irq. resource_source)); break; case ACPI_RESOURCE_TYPE_GPIO: total_size = (acpi_rs_length) (total_size + (resource->data.gpio. pin_table_length * 2) + resource->data.gpio. resource_source.string_length + resource->data.gpio. vendor_length); break; case ACPI_RESOURCE_TYPE_SERIAL_BUS: total_size = acpi_gbl_aml_resource_serial_bus_sizes[resource-> data. common_serial_bus. type]; total_size = (acpi_rs_length) (total_size + resource->data. i2c_serial_bus. resource_source. string_length + resource->data. i2c_serial_bus. vendor_length); break; default: break; } /* Update the total */ aml_size_needed += total_size; /* Point to the next object */ resource = ACPI_ADD_PTR(struct acpi_resource, resource, resource->length); } /* Did not find an end_tag resource descriptor */ return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); } /******************************************************************************* * * FUNCTION: acpi_rs_get_list_length * * PARAMETERS: aml_buffer - Pointer to the resource byte stream * aml_buffer_length - Size of aml_buffer * size_needed - Where the size needed is returned * * RETURN: Status * * DESCRIPTION: Takes an external resource byte stream and calculates the size * buffer needed to hold the corresponding internal resource * descriptor linked list. * ******************************************************************************/ acpi_status acpi_rs_get_list_length(u8 * aml_buffer, u32 aml_buffer_length, acpi_size * size_needed) { acpi_status status; u8 *end_aml; u8 *buffer; u32 buffer_size; u16 temp16; u16 resource_length; u32 extra_struct_bytes; u8 resource_index; u8 minimum_aml_resource_length; union aml_resource *aml_resource; ACPI_FUNCTION_TRACE(rs_get_list_length); *size_needed = ACPI_RS_SIZE_MIN; /* Minimum size is one end_tag */ end_aml = aml_buffer + aml_buffer_length; /* Walk the list of AML resource descriptors */ while (aml_buffer < end_aml) { /* Validate the Resource Type and Resource Length */ status = acpi_ut_validate_resource(NULL, aml_buffer, &resource_index); if (ACPI_FAILURE(status)) { /* * Exit on failure. Cannot continue because the descriptor length * may be bogus also. */ return_ACPI_STATUS(status); } aml_resource = (void *)aml_buffer; /* Get the resource length and base (minimum) AML size */ resource_length = acpi_ut_get_resource_length(aml_buffer); minimum_aml_resource_length = acpi_gbl_resource_aml_sizes[resource_index]; /* * Augment the size for descriptors with optional * and/or variable length fields */ extra_struct_bytes = 0; buffer = aml_buffer + acpi_ut_get_resource_header_length(aml_buffer); switch (acpi_ut_get_resource_type(aml_buffer)) { case ACPI_RESOURCE_NAME_IRQ: /* * IRQ Resource: * Get the number of bits set in the 16-bit IRQ mask */ ACPI_MOVE_16_TO_16(&temp16, buffer); extra_struct_bytes = acpi_rs_count_set_bits(temp16); break; case ACPI_RESOURCE_NAME_DMA: /* * DMA Resource: * Get the number of bits set in the 8-bit DMA mask */ extra_struct_bytes = acpi_rs_count_set_bits(*buffer); break; case ACPI_RESOURCE_NAME_VENDOR_SMALL: case ACPI_RESOURCE_NAME_VENDOR_LARGE: /* * Vendor Resource: * Get the number of vendor data bytes */ extra_struct_bytes = resource_length; /* * There is already one byte included in the minimum * descriptor size. If there are extra struct bytes, * subtract one from the count. */ if (extra_struct_bytes) { extra_struct_bytes--; } break; case ACPI_RESOURCE_NAME_END_TAG: /* * End Tag: This is the normal exit */ return_ACPI_STATUS(AE_OK); case ACPI_RESOURCE_NAME_ADDRESS32: case ACPI_RESOURCE_NAME_ADDRESS16: case ACPI_RESOURCE_NAME_ADDRESS64: /* * Address Resource: * Add the size of the optional resource_source */ extra_struct_bytes = acpi_rs_stream_option_length(resource_length, minimum_aml_resource_length); break; case ACPI_RESOURCE_NAME_EXTENDED_IRQ: /* * Extended IRQ Resource: * Using the interrupt_table_length, add 4 bytes for each additional * interrupt. Note: at least one interrupt is required and is * included in the minimum descriptor size (reason for the -1) */ extra_struct_bytes = (buffer[1] - 1) * sizeof(u32); /* Add the size of the optional resource_source */ extra_struct_bytes += acpi_rs_stream_option_length(resource_length - extra_struct_bytes, minimum_aml_resource_length); break; case ACPI_RESOURCE_NAME_GPIO: /* Vendor data is optional */ if (aml_resource->gpio.vendor_length) { extra_struct_bytes += aml_resource->gpio.vendor_offset - aml_resource->gpio.pin_table_offset + aml_resource->gpio.vendor_length; } else { extra_struct_bytes += aml_resource->large_header.resource_length + sizeof(struct aml_resource_large_header) - aml_resource->gpio.pin_table_offset; } break; case ACPI_RESOURCE_NAME_SERIAL_BUS: minimum_aml_resource_length = acpi_gbl_resource_aml_serial_bus_sizes [aml_resource->common_serial_bus.type]; extra_struct_bytes += aml_resource->common_serial_bus.resource_length - minimum_aml_resource_length; break; default: break; } /* * Update the required buffer size for the internal descriptor structs * * Important: Round the size up for the appropriate alignment. This * is a requirement on IA64. */ if (acpi_ut_get_resource_type(aml_buffer) == ACPI_RESOURCE_NAME_SERIAL_BUS) { buffer_size = acpi_gbl_resource_struct_serial_bus_sizes [aml_resource->common_serial_bus.type] + extra_struct_bytes; } else { buffer_size = acpi_gbl_resource_struct_sizes[resource_index] + extra_struct_bytes; } buffer_size = (u32)ACPI_ROUND_UP_TO_NATIVE_WORD(buffer_size); *size_needed += buffer_size; ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "Type %.2X, AmlLength %.2X InternalLength %.2X\n", acpi_ut_get_resource_type(aml_buffer), acpi_ut_get_descriptor_length(aml_buffer), buffer_size)); /* * Point to the next resource within the AML stream using the length * contained in the resource descriptor header */ aml_buffer += acpi_ut_get_descriptor_length(aml_buffer); } /* Did not find an end_tag resource descriptor */ return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); } /******************************************************************************* * * FUNCTION: acpi_rs_get_pci_routing_table_length * * PARAMETERS: package_object - Pointer to the package object * buffer_size_needed - u32 pointer of the size buffer * needed to properly return the * parsed data * * RETURN: Status * * DESCRIPTION: Given a package representing a PCI routing table, this * calculates the size of the corresponding linked list of * descriptions. * ******************************************************************************/ acpi_status acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, acpi_size * buffer_size_needed) { u32 number_of_elements; acpi_size temp_size_needed = 0; union acpi_operand_object **top_object_list; u32 index; union acpi_operand_object *package_element; union acpi_operand_object **sub_object_list; u8 name_found; u32 table_index; ACPI_FUNCTION_TRACE(rs_get_pci_routing_table_length); number_of_elements = package_object->package.count; /* * Calculate the size of the return buffer. * The base size is the number of elements * the sizes of the * structures. Additional space for the strings is added below. * The minus one is to subtract the size of the u8 Source[1] * member because it is added below. * * But each PRT_ENTRY structure has a pointer to a string and * the size of that string must be found. */ top_object_list = package_object->package.elements; for (index = 0; index < number_of_elements; index++) { /* Dereference the subpackage */ package_element = *top_object_list; /* We must have a valid Package object */ if (!package_element || (package_element->common.type != ACPI_TYPE_PACKAGE)) { return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } /* * The sub_object_list will now point to an array of the * four IRQ elements: Address, Pin, Source and source_index */ sub_object_list = package_element->package.elements; /* Scan the irq_table_elements for the Source Name String */ name_found = FALSE; for (table_index = 0; table_index < package_element->package.count && !name_found; table_index++) { if (*sub_object_list && /* Null object allowed */ ((ACPI_TYPE_STRING == (*sub_object_list)->common.type) || ((ACPI_TYPE_LOCAL_REFERENCE == (*sub_object_list)->common.type) && ((*sub_object_list)->reference.class == ACPI_REFCLASS_NAME)))) { name_found = TRUE; } else { /* Look at the next element */ sub_object_list++; } } temp_size_needed += (sizeof(struct acpi_pci_routing_table) - 4); /* Was a String type found? */ if (name_found) { if ((*sub_object_list)->common.type == ACPI_TYPE_STRING) { /* * The length String.Length field does not include the * terminating NULL, add 1 */ temp_size_needed += ((acpi_size) (*sub_object_list)->string. length + 1); } else { temp_size_needed += acpi_ns_get_pathname_length((*sub_object_list)->reference.node); } } else { /* * If no name was found, then this is a NULL, which is * translated as a u32 zero. */ temp_size_needed += sizeof(u32); } /* Round up the size since each element must be aligned */ temp_size_needed = ACPI_ROUND_UP_TO_64BIT(temp_size_needed); /* Point to the next union acpi_operand_object */ top_object_list++; } /* * Add an extra element to the end of the list, essentially a * NULL terminator */ *buffer_size_needed = temp_size_needed + sizeof(struct acpi_pci_routing_table); return_ACPI_STATUS(AE_OK); }