# # Generic algorithms support # config XOR_BLOCKS tristate # # async_tx api: hardware offloaded memory transfer/transform support # source "crypto/async_tx/Kconfig" # # Cryptographic API Configuration # menuconfig CRYPTO tristate "Cryptographic API" help This option provides the core Cryptographic API. if CRYPTO comment "Crypto core or helper" config CRYPTO_FIPS bool "FIPS 200 compliance" depends on CRYPTO_ANSI_CPRNG && !CRYPTO_MANAGER_DISABLE_TESTS help This options enables the fips boot option which is required if you want to system to operate in a FIPS 200 certification. You should say no unless you know what this is. config CRYPTO_ALGAPI tristate select CRYPTO_ALGAPI2 help This option provides the API for cryptographic algorithms. config CRYPTO_ALGAPI2 tristate config CRYPTO_AEAD tristate select CRYPTO_AEAD2 select CRYPTO_ALGAPI config CRYPTO_AEAD2 tristate select CRYPTO_ALGAPI2 config CRYPTO_BLKCIPHER tristate select CRYPTO_BLKCIPHER2 select CRYPTO_ALGAPI config CRYPTO_BLKCIPHER2 tristate select CRYPTO_ALGAPI2 select CRYPTO_RNG2 select CRYPTO_WORKQUEUE config CRYPTO_HASH tristate select CRYPTO_HASH2 select CRYPTO_ALGAPI config CRYPTO_HASH2 tristate select CRYPTO_ALGAPI2 config CRYPTO_RNG tristate select CRYPTO_RNG2 select CRYPTO_ALGAPI config CRYPTO_RNG2 tristate select CRYPTO_ALGAPI2 config CRYPTO_PCOMP tristate select CRYPTO_PCOMP2 select CRYPTO_ALGAPI config CRYPTO_PCOMP2 tristate select CRYPTO_ALGAPI2 config CRYPTO_MANAGER tristate "Cryptographic algorithm manager" select CRYPTO_MANAGER2 help Create default cryptographic template instantiations such as cbc(aes). config CRYPTO_MANAGER2 def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y) select CRYPTO_AEAD2 select CRYPTO_HASH2 select CRYPTO_BLKCIPHER2 select CRYPTO_PCOMP2 config CRYPTO_USER tristate "Userspace cryptographic algorithm configuration" depends on NET select CRYPTO_MANAGER help Userspace configuration for cryptographic instantiations such as cbc(aes). config CRYPTO_MANAGER_DISABLE_TESTS bool "Disable run-time self tests" default y depends on CRYPTO_MANAGER2 help Disable run-time self tests that normally take place at algorithm registration. config CRYPTO_GF128MUL tristate "GF(2^128) multiplication functions" help Efficient table driven implementation of multiplications in the field GF(2^128). This is needed by some cypher modes. This option will be selected automatically if you select such a cipher mode. Only select this option by hand if you expect to load an external module that requires these functions. config CRYPTO_NULL tristate "Null algorithms" select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER select CRYPTO_HASH help These are 'Null' algorithms, used by IPsec, which do nothing. config CRYPTO_PCRYPT tristate "Parallel crypto engine" depends on SMP select PADATA select CRYPTO_MANAGER select CRYPTO_AEAD help This converts an arbitrary crypto algorithm into a parallel algorithm that executes in kernel threads. config CRYPTO_WORKQUEUE tristate config CRYPTO_CRYPTD tristate "Software async crypto daemon" select CRYPTO_BLKCIPHER select CRYPTO_HASH select CRYPTO_MANAGER select CRYPTO_WORKQUEUE help This is a generic software asynchronous crypto daemon that converts an arbitrary synchronous software crypto algorithm into an asynchronous algorithm that executes in a kernel thread. config CRYPTO_AUTHENC tristate "Authenc support" select CRYPTO_AEAD select CRYPTO_BLKCIPHER select CRYPTO_MANAGER select CRYPTO_HASH help Authenc: Combined mode wrapper for IPsec. This is required for IPSec. config CRYPTO_TEST tristate "Testing module" depends on m select CRYPTO_MANAGER help Quick & dirty crypto test module. config CRYPTO_ABLK_HELPER_X86 tristate depends on X86 select CRYPTO_CRYPTD config CRYPTO_ABLK_HELPER tristate select CRYPTO_CRYPTD config CRYPTO_GLUE_HELPER_X86 tristate depends on X86 select CRYPTO_ALGAPI comment "Authenticated Encryption with Associated Data" config CRYPTO_CCM tristate "CCM support" select CRYPTO_CTR select CRYPTO_AEAD help Support for Counter with CBC MAC. Required for IPsec. config CRYPTO_GCM tristate "GCM/GMAC support" select CRYPTO_CTR select CRYPTO_AEAD select CRYPTO_GHASH select CRYPTO_NULL help Support for Galois/Counter Mode (GCM) and Galois Message Authentication Code (GMAC). Required for IPSec. config CRYPTO_SEQIV tristate "Sequence Number IV Generator" select CRYPTO_AEAD select CRYPTO_BLKCIPHER select CRYPTO_RNG help This IV generator generates an IV based on a sequence number by xoring it with a salt. This algorithm is mainly useful for CTR comment "Block modes" config CRYPTO_CBC tristate "CBC support" select CRYPTO_BLKCIPHER select CRYPTO_MANAGER help CBC: Cipher Block Chaining mode This block cipher algorithm is required for IPSec. config CRYPTO_CTR tristate "CTR support" select CRYPTO_BLKCIPHER select CRYPTO_SEQIV select CRYPTO_MANAGER help CTR: Counter mode This block cipher algorithm is required for IPSec. config CRYPTO_CTS tristate "CTS support" select CRYPTO_BLKCIPHER help CTS: Cipher Text Stealing This is the Cipher Text Stealing mode as described by Section 8 of rfc2040 and referenced by rfc3962. (rfc3962 includes errata information in its Appendix A) This mode is required for Kerberos gss mechanism support for AES encryption. config CRYPTO_ECB tristate "ECB support" select CRYPTO_BLKCIPHER select CRYPTO_MANAGER help ECB: Electronic CodeBook mode This is the simplest block cipher algorithm. It simply encrypts the input block by block. config CRYPTO_LRW tristate "LRW support" select CRYPTO_BLKCIPHER select CRYPTO_MANAGER select CRYPTO_GF128MUL help LRW: Liskov Rivest Wagner, a tweakable, non malleable, non movable narrow block cipher mode for dm-crypt. Use it with cipher specification string aes-lrw-benbi, the key must be 256, 320 or 384. The first 128, 192 or 256 bits in the key are used for AES and the rest is used to tie each cipher block to its logical position. config CRYPTO_PCBC tristate "PCBC support" select CRYPTO_BLKCIPHER select CRYPTO_MANAGER help PCBC: Propagating Cipher Block Chaining mode This block cipher algorithm is required for RxRPC. config CRYPTO_XTS tristate "XTS support" select CRYPTO_BLKCIPHER select CRYPTO_MANAGER select CRYPTO_GF128MUL help XTS: IEEE1619/D16 narrow block cipher use with aes-xts-plain, key size 256, 384 or 512 bits. This implementation currently can't handle a sectorsize which is not a multiple of 16 bytes. comment "Hash modes" config CRYPTO_CMAC tristate "CMAC support" select CRYPTO_HASH select CRYPTO_MANAGER help Cipher-based Message Authentication Code (CMAC) specified by The National Institute of Standards and Technology (NIST). https://tools.ietf.org/html/rfc4493 http://csrc.nist.gov/publications/nistpubs/800-38B/SP_800-38B.pdf config CRYPTO_HMAC tristate "HMAC support" select CRYPTO_HASH select CRYPTO_MANAGER help HMAC: Keyed-Hashing for Message Authentication (RFC2104). This is required for IPSec. config CRYPTO_XCBC tristate "XCBC support" select CRYPTO_HASH select CRYPTO_MANAGER help XCBC: Keyed-Hashing with encryption algorithm http://www.ietf.org/rfc/rfc3566.txt http://csrc.nist.gov/encryption/modes/proposedmodes/ xcbc-mac/xcbc-mac-spec.pdf config CRYPTO_VMAC tristate "VMAC support" select CRYPTO_HASH select CRYPTO_MANAGER help VMAC is a message authentication algorithm designed for very high speed on 64-bit architectures. See also: comment "Digest" config CRYPTO_CRC32C tristate "CRC32c CRC algorithm" select CRYPTO_HASH select CRC32 help Castagnoli, et al Cyclic Redundancy-Check Algorithm. Used by iSCSI for header and data digests and by others. See Castagnoli93. Module will be crc32c. config CRYPTO_CRC32C_INTEL tristate "CRC32c INTEL hardware acceleration" depends on X86 select CRYPTO_HASH help In Intel processor with SSE4.2 supported, the processor will support CRC32C implementation using hardware accelerated CRC32 instruction. This option will create 'crc32c-intel' module, which will enable any routine to use the CRC32 instruction to gain performance compared with software implementation. Module will be crc32c-intel. config CRYPTO_CRC32C_SPARC64 tristate "CRC32c CRC algorithm (SPARC64)" depends on SPARC64 select CRYPTO_HASH select CRC32 help CRC32c CRC algorithm implemented using sparc64 crypto instructions, when available. config CRYPTO_CRC32 tristate "CRC32 CRC algorithm" select CRYPTO_HASH select CRC32 help CRC-32-IEEE 802.3 cyclic redundancy-check algorithm. Shash crypto api wrappers to crc32_le function. config CRYPTO_CRC32_PCLMUL tristate "CRC32 PCLMULQDQ hardware acceleration" depends on X86 select CRYPTO_HASH select CRC32 help From Intel Westmere and AMD Bulldozer processor with SSE4.2 and PCLMULQDQ supported, the processor will support CRC32 PCLMULQDQ implementation using hardware accelerated PCLMULQDQ instruction. This option will create 'crc32-plcmul' module, which will enable any routine to use the CRC-32-IEEE 802.3 checksum and gain better performance as compared with the table implementation. config CRYPTO_GHASH tristate "GHASH digest algorithm" select CRYPTO_GF128MUL help GHASH is message digest algorithm for GCM (Galois/Counter Mode). config CRYPTO_MD4 tristate "MD4 digest algorithm" select CRYPTO_HASH help MD4 message digest algorithm (RFC1320). config CRYPTO_MD5 tristate "MD5 digest algorithm" select CRYPTO_HASH help MD5 message digest algorithm (RFC1321). config CRYPTO_MD5_SPARC64 tristate "MD5 digest algorithm (SPARC64)" depends on SPARC64 select CRYPTO_MD5 select CRYPTO_HASH help MD5 message digest algorithm (RFC1321) implemented using sparc64 crypto instructions, when available. config CRYPTO_MICHAEL_MIC tristate "Michael MIC keyed digest algorithm" select CRYPTO_HASH help Michael MIC is used for message integrity protection in TKIP (IEEE 802.11i). This algorithm is required for TKIP, but it should not be used for other purposes because of the weakness of the algorithm. config CRYPTO_RMD128 tristate "RIPEMD-128 digest algorithm" select CRYPTO_HASH help RIPEMD-128 (ISO/IEC 10118-3:2004). RIPEMD-128 is a 128-bit cryptographic hash function. It should only be used as a secure replacement for RIPEMD. For other use cases, RIPEMD-160 should be used. Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel. See config CRYPTO_RMD160 tristate "RIPEMD-160 digest algorithm" select CRYPTO_HASH help RIPEMD-160 (ISO/IEC 10118-3:2004). RIPEMD-160 is a 160-bit cryptographic hash function. It is intended to be used as a secure replacement for the 128-bit hash functions MD4, MD5 and it's predecessor RIPEMD (not to be confused with RIPEMD-128). It's speed is comparable to SHA1 and there are no known attacks against RIPEMD-160. Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel. See config CRYPTO_RMD256 tristate "RIPEMD-256 digest algorithm" select CRYPTO_HASH help RIPEMD-256 is an optional extension of RIPEMD-128 with a 256 bit hash. It is intended for applications that require longer hash-results, without needing a larger security level (than RIPEMD-128). Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel. See config CRYPTO_RMD320 tristate "RIPEMD-320 digest algorithm" select CRYPTO_HASH help RIPEMD-320 is an optional extension of RIPEMD-160 with a 320 bit hash. It is intended for applications that require longer hash-results, without needing a larger security level (than RIPEMD-160). Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel. See config CRYPTO_SHA1 tristate "SHA1 digest algorithm" select CRYPTO_HASH help SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). config CRYPTO_SHA1_SSSE3 tristate "SHA1 digest algorithm (SSSE3/AVX)" depends on X86 && 64BIT select CRYPTO_SHA1 select CRYPTO_HASH help SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented using Supplemental SSE3 (SSSE3) instructions or Advanced Vector Extensions (AVX), when available. config CRYPTO_SHA256_SSSE3 tristate "SHA256 digest algorithm (SSSE3/AVX/AVX2)" depends on X86 && 64BIT select CRYPTO_SHA256 select CRYPTO_HASH help SHA-256 secure hash standard (DFIPS 180-2) implemented using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector Extensions version 1 (AVX1), or Advanced Vector Extensions version 2 (AVX2) instructions, when available. config CRYPTO_SHA512_SSSE3 tristate "SHA512 digest algorithm (SSSE3/AVX/AVX2)" depends on X86 && 64BIT select CRYPTO_SHA512 select CRYPTO_HASH help SHA-512 secure hash standard (DFIPS 180-2) implemented using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector Extensions version 1 (AVX1), or Advanced Vector Extensions version 2 (AVX2) instructions, when available. config CRYPTO_SHA1_SPARC64 tristate "SHA1 digest algorithm (SPARC64)" depends on SPARC64 select CRYPTO_SHA1 select CRYPTO_HASH help SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented using sparc64 crypto instructions, when available. config CRYPTO_SHA1_ARM tristate "SHA1 digest algorithm (ARM-asm)" depends on ARM select CRYPTO_SHA1 select CRYPTO_HASH help SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented using optimized ARM assembler. config CRYPTO_SHA1_PPC tristate "SHA1 digest algorithm (powerpc)" depends on PPC help This is the powerpc hardware accelerated implementation of the SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). config CRYPTO_SHA256 tristate "SHA224 and SHA256 digest algorithm" select CRYPTO_HASH help SHA256 secure hash standard (DFIPS 180-2). This version of SHA implements a 256 bit hash with 128 bits of security against collision attacks. This code also includes SHA-224, a 224 bit hash with 112 bits of security against collision attacks. config CRYPTO_SHA256_SPARC64 tristate "SHA224 and SHA256 digest algorithm (SPARC64)" depends on SPARC64 select CRYPTO_SHA256 select CRYPTO_HASH help SHA-256 secure hash standard (DFIPS 180-2) implemented using sparc64 crypto instructions, when available. config CRYPTO_SHA512 tristate "SHA384 and SHA512 digest algorithms" select CRYPTO_HASH help SHA512 secure hash standard (DFIPS 180-2). This version of SHA implements a 512 bit hash with 256 bits of security against collision attacks. This code also includes SHA-384, a 384 bit hash with 192 bits of security against collision attacks. config CRYPTO_SHA512_SPARC64 tristate "SHA384 and SHA512 digest algorithm (SPARC64)" depends on SPARC64 select CRYPTO_SHA512 select CRYPTO_HASH help SHA-512 secure hash standard (DFIPS 180-2) implemented using sparc64 crypto instructions, when available. config CRYPTO_TGR192 tristate "Tiger digest algorithms" select CRYPTO_HASH help Tiger hash algorithm 192, 160 and 128-bit hashes Tiger is a hash function optimized for 64-bit processors while still having decent performance on 32-bit processors. Tiger was developed by Ross Anderson and Eli Biham. See also: . config CRYPTO_WP512 tristate "Whirlpool digest algorithms" select CRYPTO_HASH help Whirlpool hash algorithm 512, 384 and 256-bit hashes Whirlpool-512 is part of the NESSIE cryptographic primitives. Whirlpool will be part of the ISO/IEC 10118-3:2003(E) standard See also: config CRYPTO_GHASH_CLMUL_NI_INTEL tristate "GHASH digest algorithm (CLMUL-NI accelerated)" depends on X86 && 64BIT select CRYPTO_CRYPTD help GHASH is message digest algorithm for GCM (Galois/Counter Mode). The implementation is accelerated by CLMUL-NI of Intel. comment "Ciphers" config CRYPTO_AES tristate "AES cipher algorithms" select CRYPTO_ALGAPI help AES cipher algorithms (FIPS-197). AES uses the Rijndael algorithm. Rijndael appears to be consistently a very good performer in both hardware and software across a wide range of computing environments regardless of its use in feedback or non-feedback modes. Its key setup time is excellent, and its key agility is good. Rijndael's very low memory requirements make it very well suited for restricted-space environments, in which it also demonstrates excellent performance. Rijndael's operations are among the easiest to defend against power and timing attacks. The AES specifies three key sizes: 128, 192 and 256 bits See for more information. config CRYPTO_AES_586 tristate "AES cipher algorithms (i586)" depends on (X86 || UML_X86) && !64BIT select CRYPTO_ALGAPI select CRYPTO_AES help AES cipher algorithms (FIPS-197). AES uses the Rijndael algorithm. Rijndael appears to be consistently a very good performer in both hardware and software across a wide range of computing environments regardless of its use in feedback or non-feedback modes. Its key setup time is excellent, and its key agility is good. Rijndael's very low memory requirements make it very well suited for restricted-space environments, in which it also demonstrates excellent performance. Rijndael's operations are among the easiest to defend against power and timing attacks. The AES specifies three key sizes: 128, 192 and 256 bits See for more information. config CRYPTO_AES_X86_64 tristate "AES cipher algorithms (x86_64)" depends on (X86 || UML_X86) && 64BIT select CRYPTO_ALGAPI select CRYPTO_AES help AES cipher algorithms (FIPS-197). AES uses the Rijndael algorithm. Rijndael appears to be consistently a very good performer in both hardware and software across a wide range of computing environments regardless of its use in feedback or non-feedback modes. Its key setup time is excellent, and its key agility is good. Rijndael's very low memory requirements make it very well suited for restricted-space environments, in which it also demonstrates excellent performance. Rijndael's operations are among the easiest to defend against power and timing attacks. The AES specifies three key sizes: 128, 192 and 256 bits See for more information. config CRYPTO_AES_NI_INTEL tristate "AES cipher algorithms (AES-NI)" depends on X86 select CRYPTO_AES_X86_64 if 64BIT select CRYPTO_AES_586 if !64BIT select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 select CRYPTO_ALGAPI select CRYPTO_GLUE_HELPER_X86 if 64BIT select CRYPTO_LRW select CRYPTO_XTS help Use Intel AES-NI instructions for AES algorithm. AES cipher algorithms (FIPS-197). AES uses the Rijndael algorithm. Rijndael appears to be consistently a very good performer in both hardware and software across a wide range of computing environments regardless of its use in feedback or non-feedback modes. Its key setup time is excellent, and its key agility is good. Rijndael's very low memory requirements make it very well suited for restricted-space environments, in which it also demonstrates excellent performance. Rijndael's operations are among the easiest to defend against power and timing attacks. The AES specifies three key sizes: 128, 192 and 256 bits See for more information. In addition to AES cipher algorithm support, the acceleration for some popular block cipher mode is supported too, including ECB, CBC, LRW, PCBC, XTS. The 64 bit version has additional acceleration for CTR. config CRYPTO_AES_SPARC64 tristate "AES cipher algorithms (SPARC64)" depends on SPARC64 select CRYPTO_CRYPTD select CRYPTO_ALGAPI help Use SPARC64 crypto opcodes for AES algorithm. AES cipher algorithms (FIPS-197). AES uses the Rijndael algorithm. Rijndael appears to be consistently a very good performer in both hardware and software across a wide range of computing environments regardless of its use in feedback or non-feedback modes. Its key setup time is excellent, and its key agility is good. Rijndael's very low memory requirements make it very well suited for restricted-space environments, in which it also demonstrates excellent performance. Rijndael's operations are among the easiest to defend against power and timing attacks. The AES specifies three key sizes: 128, 192 and 256 bits See for more information. In addition to AES cipher algorithm support, the acceleration for some popular block cipher mode is supported too, including ECB and CBC. config CRYPTO_AES_ARM tristate "AES cipher algorithms (ARM-asm)" depends on ARM select CRYPTO_ALGAPI select CRYPTO_AES help Use optimized AES assembler routines for ARM platforms. AES cipher algorithms (FIPS-197). AES uses the Rijndael algorithm. Rijndael appears to be consistently a very good performer in both hardware and software across a wide range of computing environments regardless of its use in feedback or non-feedback modes. Its key setup time is excellent, and its key agility is good. Rijndael's very low memory requirements make it very well suited for restricted-space environments, in which it also demonstrates excellent performance. Rijndael's operations are among the easiest to defend against power and timing attacks. The AES specifies three key sizes: 128, 192 and 256 bits See for more information. config CRYPTO_ANUBIS tristate "Anubis cipher algorithm" select CRYPTO_ALGAPI help Anubis cipher algorithm. Anubis is a variable key length cipher which can use keys from 128 bits to 320 bits in length. It was evaluated as a entrant in the NESSIE competition. See also: config CRYPTO_ARC4 tristate "ARC4 cipher algorithm" select CRYPTO_BLKCIPHER help ARC4 cipher algorithm. ARC4 is a stream cipher using keys ranging from 8 bits to 2048 bits in length. This algorithm is required for driver-based WEP, but it should not be for other purposes because of the weakness of the algorithm. config CRYPTO_BLOWFISH tristate "Blowfish cipher algorithm" select CRYPTO_ALGAPI select CRYPTO_BLOWFISH_COMMON help Blowfish cipher algorithm, by Bruce Schneier. This is a variable key length cipher which can use keys from 32 bits to 448 bits in length. It's fast, simple and specifically designed for use on "large microprocessors". See also: config CRYPTO_BLOWFISH_COMMON tristate help Common parts of the Blowfish cipher algorithm shared by the generic c and the assembler implementations. See also: config CRYPTO_BLOWFISH_X86_64 tristate "Blowfish cipher algorithm (x86_64)" depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_BLOWFISH_COMMON help Blowfish cipher algorithm (x86_64), by Bruce Schneier. This is a variable key length cipher which can use keys from 32 bits to 448 bits in length. It's fast, simple and specifically designed for use on "large microprocessors". See also: config CRYPTO_BLOWFISH_AVX2_X86_64 tristate "Blowfish cipher algorithm (x86_64/AVX2)" depends on X86 && 64BIT depends on BROKEN select CRYPTO_ALGAPI select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 select CRYPTO_BLOWFISH_COMMON select CRYPTO_BLOWFISH_X86_64 help Blowfish cipher algorithm (x86_64/AVX2), by Bruce Schneier. This is a variable key length cipher which can use keys from 32 bits to 448 bits in length. It's fast, simple and specifically designed for use on "large microprocessors". See also: config CRYPTO_CAMELLIA tristate "Camellia cipher algorithms" depends on CRYPTO select CRYPTO_ALGAPI help Camellia cipher algorithms module. Camellia is a symmetric key block cipher developed jointly at NTT and Mitsubishi Electric Corporation. The Camellia specifies three key sizes: 128, 192 and 256 bits. See also: config CRYPTO_CAMELLIA_X86_64 tristate "Camellia cipher algorithm (x86_64)" depends on X86 && 64BIT depends on CRYPTO select CRYPTO_ALGAPI select CRYPTO_GLUE_HELPER_X86 select CRYPTO_LRW select CRYPTO_XTS help Camellia cipher algorithm module (x86_64). Camellia is a symmetric key block cipher developed jointly at NTT and Mitsubishi Electric Corporation. The Camellia specifies three key sizes: 128, 192 and 256 bits. See also: config CRYPTO_CAMELLIA_AESNI_AVX_X86_64 tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX)" depends on X86 && 64BIT depends on CRYPTO select CRYPTO_ALGAPI select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 select CRYPTO_GLUE_HELPER_X86 select CRYPTO_CAMELLIA_X86_64 select CRYPTO_LRW select CRYPTO_XTS help Camellia cipher algorithm module (x86_64/AES-NI/AVX). Camellia is a symmetric key block cipher developed jointly at NTT and Mitsubishi Electric Corporation. The Camellia specifies three key sizes: 128, 192 and 256 bits. See also: config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX2)" depends on X86 && 64BIT depends on CRYPTO select CRYPTO_ALGAPI select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 select CRYPTO_GLUE_HELPER_X86 select CRYPTO_CAMELLIA_X86_64 select CRYPTO_CAMELLIA_AESNI_AVX_X86_64 select CRYPTO_LRW select CRYPTO_XTS help Camellia cipher algorithm module (x86_64/AES-NI/AVX2). Camellia is a symmetric key block cipher developed jointly at NTT and Mitsubishi Electric Corporation. The Camellia specifies three key sizes: 128, 192 and 256 bits. See also: config CRYPTO_CAMELLIA_SPARC64 tristate "Camellia cipher algorithm (SPARC64)" depends on SPARC64 depends on CRYPTO select CRYPTO_ALGAPI help Camellia cipher algorithm module (SPARC64). Camellia is a symmetric key block cipher developed jointly at NTT and Mitsubishi Electric Corporation. The Camellia specifies three key sizes: 128, 192 and 256 bits. See also: config CRYPTO_CAST_COMMON tristate help Common parts of the CAST cipher algorithms shared by the generic c and the assembler implementations. config CRYPTO_CAST5 tristate "CAST5 (CAST-128) cipher algorithm" select CRYPTO_ALGAPI select CRYPTO_CAST_COMMON help The CAST5 encryption algorithm (synonymous with CAST-128) is described in RFC2144. config CRYPTO_CAST5_AVX_X86_64 tristate "CAST5 (CAST-128) cipher algorithm (x86_64/AVX)" depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 select CRYPTO_CAST_COMMON select CRYPTO_CAST5 help The CAST5 encryption algorithm (synonymous with CAST-128) is described in RFC2144. This module provides the Cast5 cipher algorithm that processes sixteen blocks parallel using the AVX instruction set. config CRYPTO_CAST6 tristate "CAST6 (CAST-256) cipher algorithm" select CRYPTO_ALGAPI select CRYPTO_CAST_COMMON help The CAST6 encryption algorithm (synonymous with CAST-256) is described in RFC2612. config CRYPTO_CAST6_AVX_X86_64 tristate "CAST6 (CAST-256) cipher algorithm (x86_64/AVX)" depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 select CRYPTO_GLUE_HELPER_X86 select CRYPTO_CAST_COMMON select CRYPTO_CAST6 select CRYPTO_LRW select CRYPTO_XTS help The CAST6 encryption algorithm (synonymous with CAST-256) is described in RFC2612. This module provides the Cast6 cipher algorithm that processes eight blocks parallel using the AVX instruction set. config CRYPTO_DES tristate "DES and Triple DES EDE cipher algorithms" select CRYPTO_ALGAPI help DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3). config CRYPTO_DES_SPARC64 tristate "DES and Triple DES EDE cipher algorithms (SPARC64)" depends on SPARC64 select CRYPTO_ALGAPI select CRYPTO_DES help DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3), optimized using SPARC64 crypto opcodes. config CRYPTO_FCRYPT tristate "FCrypt cipher algorithm" select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER help FCrypt algorithm used by RxRPC. config CRYPTO_KHAZAD tristate "Khazad cipher algorithm" select CRYPTO_ALGAPI help Khazad cipher algorithm. Khazad was a finalist in the initial NESSIE competition. It is an algorithm optimized for 64-bit processors with good performance on 32-bit processors. Khazad uses an 128 bit key size. See also: config CRYPTO_SALSA20 tristate "Salsa20 stream cipher algorithm" select CRYPTO_BLKCIPHER help Salsa20 stream cipher algorithm. Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT Stream Cipher Project. See The Salsa20 stream cipher algorithm is designed by Daniel J. Bernstein . See config CRYPTO_SALSA20_586 tristate "Salsa20 stream cipher algorithm (i586)" depends on (X86 || UML_X86) && !64BIT select CRYPTO_BLKCIPHER help Salsa20 stream cipher algorithm. Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT Stream Cipher Project. See The Salsa20 stream cipher algorithm is designed by Daniel J. Bernstein . See config CRYPTO_SALSA20_X86_64 tristate "Salsa20 stream cipher algorithm (x86_64)" depends on (X86 || UML_X86) && 64BIT select CRYPTO_BLKCIPHER help Salsa20 stream cipher algorithm. Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT Stream Cipher Project. See The Salsa20 stream cipher algorithm is designed by Daniel J. Bernstein . See config CRYPTO_SEED tristate "SEED cipher algorithm" select CRYPTO_ALGAPI help SEED cipher algorithm (RFC4269). SEED is a 128-bit symmetric key block cipher that has been developed by KISA (Korea Information Security Agency) as a national standard encryption algorithm of the Republic of Korea. It is a 16 round block cipher with the key size of 128 bit. See also: config CRYPTO_SERPENT tristate "Serpent cipher algorithm" select CRYPTO_ALGAPI help Serpent cipher algorithm, by Anderson, Biham & Knudsen. Keys are allowed to be from 0 to 256 bits in length, in steps of 8 bits. Also includes the 'Tnepres' algorithm, a reversed variant of Serpent for compatibility with old kerneli.org code. See also: config CRYPTO_SERPENT_SSE2_X86_64 tristate "Serpent cipher algorithm (x86_64/SSE2)" depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 select CRYPTO_GLUE_HELPER_X86 select CRYPTO_SERPENT select CRYPTO_LRW select CRYPTO_XTS help Serpent cipher algorithm, by Anderson, Biham & Knudsen. Keys are allowed to be from 0 to 256 bits in length, in steps of 8 bits. This module provides Serpent cipher algorithm that processes eigth blocks parallel using SSE2 instruction set. See also: config CRYPTO_SERPENT_SSE2_586 tristate "Serpent cipher algorithm (i586/SSE2)" depends on X86 && !64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 select CRYPTO_GLUE_HELPER_X86 select CRYPTO_SERPENT select CRYPTO_LRW select CRYPTO_XTS help Serpent cipher algorithm, by Anderson, Biham & Knudsen. Keys are allowed to be from 0 to 256 bits in length, in steps of 8 bits. This module provides Serpent cipher algorithm that processes four blocks parallel using SSE2 instruction set. See also: config CRYPTO_SERPENT_AVX_X86_64 tristate "Serpent cipher algorithm (x86_64/AVX)" depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 select CRYPTO_GLUE_HELPER_X86 select CRYPTO_SERPENT select CRYPTO_LRW select CRYPTO_XTS help Serpent cipher algorithm, by Anderson, Biham & Knudsen. Keys are allowed to be from 0 to 256 bits in length, in steps of 8 bits. This module provides the Serpent cipher algorithm that processes eight blocks parallel using the AVX instruction set. See also: config CRYPTO_SERPENT_AVX2_X86_64 tristate "Serpent cipher algorithm (x86_64/AVX2)" depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 select CRYPTO_GLUE_HELPER_X86 select CRYPTO_SERPENT select CRYPTO_SERPENT_AVX_X86_64 select CRYPTO_LRW select CRYPTO_XTS help Serpent cipher algorithm, by Anderson, Biham & Knudsen. Keys are allowed to be from 0 to 256 bits in length, in steps of 8 bits. This module provides Serpent cipher algorithm that processes 16 blocks parallel using AVX2 instruction set. See also: config CRYPTO_TEA tristate "TEA, XTEA and XETA cipher algorithms" select CRYPTO_ALGAPI help TEA cipher algorithm. Tiny Encryption Algorithm is a simple cipher that uses many rounds for security. It is very fast and uses little memory. Xtendend Tiny Encryption Algorithm is a modification to the TEA algorithm to address a potential key weakness in the TEA algorithm. Xtendend Encryption Tiny Algorithm is a mis-implementation of the XTEA algorithm for compatibility purposes. config CRYPTO_TWOFISH tristate "Twofish cipher algorithm" select CRYPTO_ALGAPI select CRYPTO_TWOFISH_COMMON help Twofish cipher algorithm. Twofish was submitted as an AES (Advanced Encryption Standard) candidate cipher by researchers at CounterPane Systems. It is a 16 round block cipher supporting key sizes of 128, 192, and 256 bits. See also: config CRYPTO_TWOFISH_COMMON tristate help Common parts of the Twofish cipher algorithm shared by the generic c and the assembler implementations. config CRYPTO_TWOFISH_586 tristate "Twofish cipher algorithms (i586)" depends on (X86 || UML_X86) && !64BIT select CRYPTO_ALGAPI select CRYPTO_TWOFISH_COMMON help Twofish cipher algorithm. Twofish was submitted as an AES (Advanced Encryption Standard) candidate cipher by researchers at CounterPane Systems. It is a 16 round block cipher supporting key sizes of 128, 192, and 256 bits. See also: config CRYPTO_TWOFISH_X86_64 tristate "Twofish cipher algorithm (x86_64)" depends on (X86 || UML_X86) && 64BIT select CRYPTO_ALGAPI select CRYPTO_TWOFISH_COMMON help Twofish cipher algorithm (x86_64). Twofish was submitted as an AES (Advanced Encryption Standard) candidate cipher by researchers at CounterPane Systems. It is a 16 round block cipher supporting key sizes of 128, 192, and 256 bits. See also: config CRYPTO_TWOFISH_X86_64_3WAY tristate "Twofish cipher algorithm (x86_64, 3-way parallel)" depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_TWOFISH_COMMON select CRYPTO_TWOFISH_X86_64 select CRYPTO_GLUE_HELPER_X86 select CRYPTO_LRW select CRYPTO_XTS help Twofish cipher algorithm (x86_64, 3-way parallel). Twofish was submitted as an AES (Advanced Encryption Standard) candidate cipher by researchers at CounterPane Systems. It is a 16 round block cipher supporting key sizes of 128, 192, and 256 bits. This module provides Twofish cipher algorithm that processes three blocks parallel, utilizing resources of out-of-order CPUs better. See also: config CRYPTO_TWOFISH_AVX_X86_64 tristate "Twofish cipher algorithm (x86_64/AVX)" depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 select CRYPTO_GLUE_HELPER_X86 select CRYPTO_TWOFISH_COMMON select CRYPTO_TWOFISH_X86_64 select CRYPTO_TWOFISH_X86_64_3WAY select CRYPTO_LRW select CRYPTO_XTS help Twofish cipher algorithm (x86_64/AVX). Twofish was submitted as an AES (Advanced Encryption Standard) candidate cipher by researchers at CounterPane Systems. It is a 16 round block cipher supporting key sizes of 128, 192, and 256 bits. This module provides the Twofish cipher algorithm that processes eight blocks parallel using the AVX Instruction Set. See also: config CRYPTO_TWOFISH_AVX2_X86_64 tristate "Twofish cipher algorithm (x86_64/AVX2)" depends on X86 && 64BIT depends on BROKEN select CRYPTO_ALGAPI select CRYPTO_CRYPTD select CRYPTO_ABLK_HELPER_X86 select CRYPTO_GLUE_HELPER_X86 select CRYPTO_TWOFISH_COMMON select CRYPTO_TWOFISH_X86_64 select CRYPTO_TWOFISH_X86_64_3WAY select CRYPTO_TWOFISH_AVX_X86_64 select CRYPTO_LRW select CRYPTO_XTS help Twofish cipher algorithm (x86_64/AVX2). Twofish was submitted as an AES (Advanced Encryption Standard) candidate cipher by researchers at CounterPane Systems. It is a 16 round block cipher supporting key sizes of 128, 192, and 256 bits. See also: comment "Compression" config CRYPTO_DEFLATE tristate "Deflate compression algorithm" select CRYPTO_ALGAPI select ZLIB_INFLATE select ZLIB_DEFLATE help This is the Deflate algorithm (RFC1951), specified for use in IPSec with the IPCOMP protocol (RFC3173, RFC2394). You will most probably want this if using IPSec. config CRYPTO_ZLIB tristate "Zlib compression algorithm" select CRYPTO_PCOMP select ZLIB_INFLATE select ZLIB_DEFLATE select NLATTR help This is the zlib algorithm. config CRYPTO_LZO tristate "LZO compression algorithm" select CRYPTO_ALGAPI select LZO_COMPRESS select LZO_DECOMPRESS help This is the LZO algorithm. config CRYPTO_842 tristate "842 compression algorithm" depends on CRYPTO_DEV_NX_COMPRESS # 842 uses lzo if the hardware becomes unavailable select LZO_COMPRESS select LZO_DECOMPRESS help This is the 842 algorithm. comment "Random Number Generation" config CRYPTO_ANSI_CPRNG tristate "Pseudo Random Number Generation for Cryptographic modules" default m select CRYPTO_AES select CRYPTO_RNG help This option enables the generic pseudo random number generator for cryptographic modules. Uses the Algorithm specified in ANSI X9.31 A.2.4. Note that this option must be enabled if CRYPTO_FIPS is selected config CRYPTO_USER_API tristate config CRYPTO_USER_API_HASH tristate "User-space interface for hash algorithms" depends on NET select CRYPTO_HASH select CRYPTO_USER_API help This option enables the user-spaces interface for hash algorithms. config CRYPTO_USER_API_SKCIPHER tristate "User-space interface for symmetric key cipher algorithms" depends on NET select CRYPTO_BLKCIPHER select CRYPTO_USER_API help This option enables the user-spaces interface for symmetric key cipher algorithms. source "drivers/crypto/Kconfig" source crypto/asymmetric_keys/Kconfig endif # if CRYPTO