/****************************************************************************/ /* * m5407sim.h -- ColdFire 5407 System Integration Module support. * * (C) Copyright 2000, Lineo (www.lineo.com) * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd. * * Modified by David W. Miller for the MCF5307 Eval Board. */ /****************************************************************************/ #ifndef m5407sim_h #define m5407sim_h /****************************************************************************/ #define CPU_NAME "COLDFIRE(m5407)" #define CPU_INSTR_PER_JIFFY 3 #define MCF_BUSCLK (MCF_CLK / 2) #include /* * Define the 5407 SIM register set addresses. */ #define MCFSIM_RSR (MCF_MBAR + 0x00) /* Reset Status */ #define MCFSIM_SYPCR (MCF_MBAR + 0x01) /* System Protection */ #define MCFSIM_SWIVR (MCF_MBAR + 0x02) /* SW Watchdog intr */ #define MCFSIM_SWSR (MCF_MBAR + 0x03) /* SW Watchdog service*/ #define MCFSIM_PAR (MCF_MBAR + 0x04) /* Pin Assignment */ #define MCFSIM_IRQPAR (MCF_MBAR + 0x06) /* Intr Assignment */ #define MCFSIM_PLLCR (MCF_MBAR + 0x08) /* PLL Ctrl */ #define MCFSIM_MPARK (MCF_MBAR + 0x0C) /* BUS Master Ctrl */ #define MCFSIM_IPR (MCF_MBAR + 0x40) /* Interrupt Pending */ #define MCFSIM_IMR (MCF_MBAR + 0x44) /* Interrupt Mask */ #define MCFSIM_AVR (MCF_MBAR + 0x4b) /* Autovector Ctrl */ #define MCFSIM_ICR0 (MCF_MBAR + 0x4c) /* Intr Ctrl reg 0 */ #define MCFSIM_ICR1 (MCF_MBAR + 0x4d) /* Intr Ctrl reg 1 */ #define MCFSIM_ICR2 (MCF_MBAR + 0x4e) /* Intr Ctrl reg 2 */ #define MCFSIM_ICR3 (MCF_MBAR + 0x4f) /* Intr Ctrl reg 3 */ #define MCFSIM_ICR4 (MCF_MBAR + 0x50) /* Intr Ctrl reg 4 */ #define MCFSIM_ICR5 (MCF_MBAR + 0x51) /* Intr Ctrl reg 5 */ #define MCFSIM_ICR6 (MCF_MBAR + 0x52) /* Intr Ctrl reg 6 */ #define MCFSIM_ICR7 (MCF_MBAR + 0x53) /* Intr Ctrl reg 7 */ #define MCFSIM_ICR8 (MCF_MBAR + 0x54) /* Intr Ctrl reg 8 */ #define MCFSIM_ICR9 (MCF_MBAR + 0x55) /* Intr Ctrl reg 9 */ #define MCFSIM_ICR10 (MCF_MBAR + 0x56) /* Intr Ctrl reg 10 */ #define MCFSIM_ICR11 (MCF_MBAR + 0x57) /* Intr Ctrl reg 11 */ #define MCFSIM_CSAR0 (MCF_MBAR + 0x80) /* CS 0 Address reg */ #define MCFSIM_CSMR0 (MCF_MBAR + 0x84) /* CS 0 Mask reg */ #define MCFSIM_CSCR0 (MCF_MBAR + 0x8a) /* CS 0 Control reg */ #define MCFSIM_CSAR1 (MCF_MBAR + 0x8c) /* CS 1 Address reg */ #define MCFSIM_CSMR1 (MCF_MBAR + 0x90) /* CS 1 Mask reg */ #define MCFSIM_CSCR1 (MCF_MBAR + 0x96) /* CS 1 Control reg */ #define MCFSIM_CSAR2 (MCF_MBAR + 0x98) /* CS 2 Address reg */ #define MCFSIM_CSMR2 (MCF_MBAR + 0x9c) /* CS 2 Mask reg */ #define MCFSIM_CSCR2 (MCF_MBAR + 0xa2) /* CS 2 Control reg */ #define MCFSIM_CSAR3 (MCF_MBAR + 0xa4) /* CS 3 Address reg */ #define MCFSIM_CSMR3 (MCF_MBAR + 0xa8) /* CS 3 Mask reg */ #define MCFSIM_CSCR3 (MCF_MBAR + 0xae) /* CS 3 Control reg */ #define MCFSIM_CSAR4 (MCF_MBAR + 0xb0) /* CS 4 Address reg */ #define MCFSIM_CSMR4 (MCF_MBAR + 0xb4) /* CS 4 Mask reg */ #define MCFSIM_CSCR4 (MCF_MBAR + 0xba) /* CS 4 Control reg */ #define MCFSIM_CSAR5 (MCF_MBAR + 0xbc) /* CS 5 Address reg */ #define MCFSIM_CSMR5 (MCF_MBAR + 0xc0) /* CS 5 Mask reg */ #define MCFSIM_CSCR5 (MCF_MBAR + 0xc6) /* CS 5 Control reg */ #define MCFSIM_CSAR6 (MCF_MBAR + 0xc8) /* CS 6 Address reg */ #define MCFSIM_CSMR6 (MCF_MBAR + 0xcc) /* CS 6 Mask reg */ #define MCFSIM_CSCR6 (MCF_MBAR + 0xd2) /* CS 6 Control reg */ #define MCFSIM_CSAR7 (MCF_MBAR + 0xd4) /* CS 7 Address reg */ #define MCFSIM_CSMR7 (MCF_MBAR + 0xd8) /* CS 7 Mask reg */ #define MCFSIM_CSCR7 (MCF_MBAR + 0xde) /* CS 7 Control reg */ #define MCFSIM_DCR (MCF_MBAR + 0x100) /* DRAM Control */ #define MCFSIM_DACR0 (MCF_MBAR + 0x108) /* DRAM 0 Addr/Ctrl */ #define MCFSIM_DMR0 (MCF_MBAR + 0x10c) /* DRAM 0 Mask */ #define MCFSIM_DACR1 (MCF_MBAR + 0x110) /* DRAM 1 Addr/Ctrl */ #define MCFSIM_DMR1 (MCF_MBAR + 0x114) /* DRAM 1 Mask */ /* * Timer module. */ #define MCFTIMER_BASE1 (MCF_MBAR + 0x140) /* Base of TIMER1 */ #define MCFTIMER_BASE2 (MCF_MBAR + 0x180) /* Base of TIMER2 */ #define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */ #define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */ #define MCFSIM_PADDR (MCF_MBAR + 0x244) #define MCFSIM_PADAT (MCF_MBAR + 0x248) /* * DMA unit base addresses. */ #define MCFDMA_BASE0 (MCF_MBAR + 0x300) /* Base address DMA 0 */ #define MCFDMA_BASE1 (MCF_MBAR + 0x340) /* Base address DMA 1 */ #define MCFDMA_BASE2 (MCF_MBAR + 0x380) /* Base address DMA 2 */ #define MCFDMA_BASE3 (MCF_MBAR + 0x3C0) /* Base address DMA 3 */ /* * Generic GPIO support */ #define MCFGPIO_PIN_MAX 16 #define MCFGPIO_IRQ_MAX -1 #define MCFGPIO_IRQ_VECBASE -1 /* * Some symbol defines for the above... */ #define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ #define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ #define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ #define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ #define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ #define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ #define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ /* * Some symbol defines for the Parallel Port Pin Assignment Register */ #define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */ /* Clear to select par I/O */ #define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */ /* Clear to select par I/O */ /* * Defines for the IRQPAR Register */ #define IRQ5_LEVEL4 0x80 #define IRQ3_LEVEL6 0x40 #define IRQ1_LEVEL2 0x20 /* * Define system peripheral IRQ usage. */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ #define MCF_IRQ_UART0 73 /* UART0 */ #define MCF_IRQ_UART1 74 /* UART1 */ /****************************************************************************/ #endif /* m5407sim_h */