# arch/arm/plat-samsung/Kconfig # # Copyright 2009 Simtec Electronics # # Licensed under GPLv2 config PLAT_SAMSUNG bool depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P default y select GENERIC_IRQ_CHIP select NO_IOPORT help Base platform code for all Samsung SoC based systems config PLAT_S5P bool depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) default y select ARCH_REQUIRE_GPIOLIB select ARM_GIC if ARCH_EXYNOS select ARM_VIC if !ARCH_EXYNOS select GIC_NON_BANKED if ARCH_EXYNOS4 select NO_IOPORT select PLAT_SAMSUNG select S3C_GPIO_TRACK select S5P_GPIO_DRVSTR select SAMSUNG_CLKSRC if !COMMON_CLK select SAMSUNG_GPIOLIB_4BIT select SAMSUNG_IRQ_VIC_TIMER help Base platform code for Samsung's S5P series SoC. if PLAT_SAMSUNG # boot configurations comment "Boot options" config S3C_BOOT_ERROR_RESET bool "S3C Reboot on decompression error" help Say y here to use the watchdog to reset the system if the kernel decompressor detects an error during decompression. config S3C_BOOT_UART_FORCE_FIFO bool "Force UART FIFO on during boot process" default y help Say Y here to force the UART FIFOs on during the kernel uncompressor config S3C_LOWLEVEL_UART_PORT int "S3C UART to use for low-level messages" default 0 help Choice of which UART port to use for the low-level messages, such as the `Uncompressing...` at start time. The value of this configuration should be between zero and two. The port must have been initialised by the boot-loader before use. # timer options config SAMSUNG_HRT bool select SAMSUNG_DEV_PWM help Use the High Resolution timer support # clock options config SAMSUNG_CLOCK bool default y if !COMMON_CLK config SAMSUNG_CLKSRC bool help Select the clock code for the clksrc implementation used by newer systems such as the S3C64XX. config S5P_CLOCK def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) help Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs # options for IRQ support config SAMSUNG_IRQ_VIC_TIMER bool help Internal configuration to build the VIC timer interrupt code. config S5P_IRQ def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) help Support common interrupt part for ARCH_S5P SoCs config S5P_EXT_INT bool help Use the external interrupts (other than GPIO interrupts.) Note: Do not choose this for S5P6440 and S5P6450. config S5P_GPIO_INT bool help Common code for the GPIO interrupts (other than external interrupts.) # options for gpio configuration support config SAMSUNG_GPIOLIB_4BIT bool help GPIOlib file contains the 4 bit modification functions for gpio configuration. GPIOlib shall be compiled only for S3C64XX and S5P series of processors. config S5P_GPIO_DRVSTR bool help Internal configuration to get and set correct GPIO driver strength helper config SAMSUNG_GPIO_EXTRA int "Number of additional GPIO pins" default 128 if SAMSUNG_GPIO_EXTRA128 default 64 if SAMSUNG_GPIO_EXTRA64 default 0 help Use additional GPIO space in addition to the GPIO's the SOC provides. This allows expanding the GPIO space for use with GPIO expanders. config SAMSUNG_GPIO_EXTRA64 bool config SAMSUNG_GPIO_EXTRA128 bool config S3C_GPIO_SPACE int "Space between gpio banks" default 0 help Add a number of spare GPIO entries between each bank for debugging purposes. This allows any problems where an counter overflows from one bank to another to be caught, at the expense of using a little more memory. config S3C_GPIO_TRACK bool help Internal configuration option to enable the s3c specific gpio chip tracking if the platform requires it. # uart options config S5P_DEV_UART def_bool y depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) # ADC driver config S3C_ADC bool "ADC common driver support" help Core support for the ADC block found in the Samsung SoC systems for drivers such as the touchscreen and hwmon to use to share this resource. # device definitions to compile in config S3C_DEV_HSMMC bool help Compile in platform device definitions for HSMMC code config S3C_DEV_HSMMC1 bool help Compile in platform device definitions for HSMMC channel 1 config S3C_DEV_HSMMC2 bool help Compile in platform device definitions for HSMMC channel 2 config S3C_DEV_HSMMC3 bool help Compile in platform device definitions for HSMMC channel 3 config S3C_DEV_HWMON bool help Compile in platform device definitions for HWMON config S3C_DEV_I2C1 bool help Compile in platform device definitions for I2C channel 1 config S3C_DEV_I2C2 bool help Compile in platform device definitions for I2C channel 2 config S3C_DEV_I2C3 bool help Compile in platform device definition for I2C controller 3 config S3C_DEV_I2C4 bool help Compile in platform device definition for I2C controller 4 config S3C_DEV_I2C5 bool help Compile in platform device definition for I2C controller 5 config S3C_DEV_I2C6 bool help Compile in platform device definition for I2C controller 6 config S3C_DEV_I2C7 bool help Compile in platform device definition for I2C controller 7 config S3C_DEV_FB bool help Compile in platform device definition for framebuffer config S3C_DEV_USB_HOST bool help Compile in platform device definition for USB host. config S3C_DEV_USB_HSOTG bool help Compile in platform device definition for USB high-speed OtG config S3C_DEV_WDT bool default y if ARCH_S3C24XX help Complie in platform device definition for Watchdog Timer config S3C_DEV_NAND bool help Compile in platform device definition for NAND controller config S3C_DEV_ONENAND bool help Compile in platform device definition for OneNAND controller config S3C_DEV_RTC bool help Complie in platform device definition for RTC config SAMSUNG_DEV_ADC bool help Compile in platform device definition for ADC controller config SAMSUNG_DEV_IDE bool help Compile in platform device definitions for IDE config S3C64XX_DEV_SPI0 bool help Compile in platform device definitions for S3C64XX's type SPI controller 0 config S3C64XX_DEV_SPI1 bool help Compile in platform device definitions for S3C64XX's type SPI controller 1 config S3C64XX_DEV_SPI2 bool help Compile in platform device definitions for S3C64XX's type SPI controller 2 config SAMSUNG_DEV_TS bool help Common in platform device definitions for touchscreen device config SAMSUNG_DEV_KEYPAD bool help Compile in platform device definitions for keypad config SAMSUNG_DEV_PWM bool default y if ARCH_S3C24XX help Compile in platform device definition for PWM Timer config SAMSUNG_DEV_BACKLIGHT bool depends on SAMSUNG_DEV_PWM help Compile in platform device definition LCD backlight with PWM Timer config S5P_DEV_CSIS0 bool help Compile in platform device definitions for MIPI-CSIS channel 0 config S5P_DEV_CSIS1 bool help Compile in platform device definitions for MIPI-CSIS channel 1 config S5P_DEV_FIMC0 bool help Compile in platform device definitions for FIMC controller 0 config S5P_DEV_FIMC1 bool help Compile in platform device definitions for FIMC controller 1 config S5P_DEV_FIMC2 bool help Compile in platform device definitions for FIMC controller 2 config S5P_DEV_FIMC3 bool help Compile in platform device definitions for FIMC controller 3 config S5P_DEV_FIMD0 bool help Compile in platform device definitions for FIMD controller 0 config S5P_DEV_G2D bool help Compile in platform device definitions for G2D device config S5P_DEV_I2C_HDMIPHY bool help Compile in platform device definitions for I2C HDMIPHY controller config S5P_DEV_JPEG bool help Compile in platform device definitions for JPEG codec config S5P_DEV_MFC bool help Compile in setup memory (init) code for MFC config S5P_DEV_ONENAND bool help Compile in platform device definition for OneNAND controller config S5P_DEV_TV bool help Compile in platform device definition for TV interface config S5P_DEV_USB_EHCI bool help Compile in platform device definition for USB EHCI config S3C24XX_PWM bool "PWM device support" select PWM select PWM_SAMSUNG help Support for exporting the PWM timer blocks via the pwm device system config S5P_SETUP_MIPIPHY bool help Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices config S3C_SETUP_CAMIF bool help Compile in common setup code for S3C CAMIF devices # DMA config S3C_DMA bool help Internal configuration for S3C DMA core config SAMSUNG_DMADEV bool select ARM_AMBA select DMADEVICES select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \ CPU_S5P6450 || CPU_S5P6440) help Use DMA device engine for PL330 DMAC. comment "Power management" config SAMSUNG_PM_DEBUG bool "S3C2410 PM Suspend debug" depends on PM select DEBUG_LL help Say Y here if you want verbose debugging from the PM Suspend and Resume code. See for more information. config S3C_PM_DEBUG_LED_SMDK bool "SMDK LED suspend/resume debugging" depends on PM && (MACH_SMDK6410) help Say Y here to enable the use of the SMDK LEDs on the baseboard for debugging of the state of the suspend and resume process. Note, this currently only works for S3C64XX based SMDK boards. config SAMSUNG_PM_CHECK bool "S3C2410 PM Suspend Memory CRC" depends on PM && CRC32 help Enable the PM code's memory area checksum over sleep. This option will generate CRCs of all blocks of memory, and store them before going to sleep. The blocks are then checked on resume for any errors. Note, this can take several seconds depending on memory size and CPU speed. See config SAMSUNG_PM_CHECK_CHUNKSIZE int "S3C2410 PM Suspend CRC Chunksize (KiB)" depends on PM && SAMSUNG_PM_CHECK default 64 help Set the chunksize in Kilobytes of the CRC for checking memory corruption over suspend and resume. A smaller value will mean that the CRC data block will take more memory, but wil identify any faults with better precision. See config SAMSUNG_WAKEMASK bool depends on PM help Compile support for wakeup-mask controls found on the S3C6400 and above. This code allows a set of interrupt to wakeup-mask mappings. See config S5P_PM bool help Common code for power management support on S5P and newer SoCs Note: Do not select this for S5P6440 and S5P6450. config S5P_SLEEP bool help Internal config node to apply common S5P sleep management code. Can be selected by S5P and newer SoCs with similar sleep procedure. config DEBUG_S3C_UART depends on PLAT_SAMSUNG int default "0" if DEBUG_S3C_UART0 default "1" if DEBUG_S3C_UART1 default "2" if DEBUG_S3C_UART2 default "3" if DEBUG_S3C_UART3 endif