/* * We need constants.h for: * VMA_VM_MM * VMA_VM_FLAGS * VM_EXEC */ #include #include /* * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm) */ .macro vma_vm_mm, rd, rn ldr \rd, [\rn, #VMA_VM_MM] .endm /* * vma_vm_flags - get vma->vm_flags */ .macro vma_vm_flags, rd, rn ldr \rd, [\rn, #VMA_VM_FLAGS] .endm .macro tsk_mm, rd, rn ldr \rd, [\rn, #TI_TASK] ldr \rd, [\rd, #TSK_ACTIVE_MM] .endm /* * act_mm - get current->active_mm */ .macro act_mm, rd bic \rd, sp, #8128 bic \rd, \rd, #63 ldr \rd, [\rd, #TI_TASK] ldr \rd, [\rd, #TSK_ACTIVE_MM] .endm /* * mmid - get context id from mm pointer (mm->context.id) * note, this field is 64bit, so in big-endian the two words are swapped too. */ .macro mmid, rd, rn #ifdef __ARMEB__ ldr \rd, [\rn, #MM_CONTEXT_ID + 4 ] #else ldr \rd, [\rn, #MM_CONTEXT_ID] #endif .endm /* * mask_asid - mask the ASID from the context ID */ .macro asid, rd, rn and \rd, \rn, #255 .endm .macro crval, clear, mmuset, ucset #ifdef CONFIG_MMU .word \clear .word \mmuset #else .word \clear .word \ucset #endif .endm /* * dcache_line_size - get the minimum D-cache line size from the CTR register * on ARMv7. */ .macro dcache_line_size, reg, tmp mrc p15, 0, \tmp, c0, c0, 1 @ read ctr lsr \tmp, \tmp, #16 and \tmp, \tmp, #0xf @ cache line size encoding mov \reg, #4 @ bytes per word mov \reg, \reg, lsl \tmp @ actual cache line size .endm /* * icache_line_size - get the minimum I-cache line size from the CTR register * on ARMv7. */ .macro icache_line_size, reg, tmp mrc p15, 0, \tmp, c0, c0, 1 @ read ctr and \tmp, \tmp, #0xf @ cache line size encoding mov \reg, #4 @ bytes per word mov \reg, \reg, lsl \tmp @ actual cache line size .endm /* * Sanity check the PTE configuration for the code below - which makes * certain assumptions about how these bits are laid out. */ #ifdef CONFIG_MMU #if L_PTE_SHARED != PTE_EXT_SHARED #error PTE shared bit mismatch #endif #if !defined (CONFIG_ARM_LPAE) && \ (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\ L_PTE_PRESENT) > L_PTE_SHARED #error Invalid Linux PTE bit settings #endif #endif /* CONFIG_MMU */ /* * The ARMv6 and ARMv7 set_pte_ext translation function. * * Permission translation: * YUWD APX AP1 AP0 SVC User * 0xxx 0 0 0 no acc no acc * 100x 1 0 1 r/o no acc * 10x0 1 0 1 r/o no acc * 1011 0 0 1 r/w no acc * 110x 1 1 1 r/o r/o * 11x0 1 1 1 r/o r/o * 1111 0 1 1 r/w r/w */ .macro armv6_mt_table pfx \pfx\()_mt_table: .long 0x00 @ L_PTE_MT_UNCACHED .long PTE_EXT_TEX(1) @ L_PTE_MT_BUFFERABLE .long PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEBACK .long PTE_BUFFERABLE @ L_PTE_MT_DEV_SHARED .long 0x00 @ unused .long 0x00 @ L_PTE_MT_MINICACHE (not present) .long PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEALLOC .long 0x00 @ unused .long PTE_EXT_TEX(1) @ L_PTE_MT_DEV_WC .long 0x00 @ unused .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_DEV_CACHED .long PTE_EXT_TEX(2) @ L_PTE_MT_DEV_NONSHARED .long 0x00 @ unused .long 0x00 @ unused .long PTE_CACHEABLE | PTE_BUFFERABLE | PTE_EXT_APX @ L_PTE_MT_VECTORS .endm .macro armv6_set_pte_ext pfx str r1, [r0], #2048 @ linux version bic r3, r1, #0x000003fc bic r3, r3, #PTE_TYPE_MASK orr r3, r3, r2 orr r3, r3, #PTE_EXT_AP0 | 2 adr ip, \pfx\()_mt_table and r2, r1, #L_PTE_MT_MASK ldr r2, [ip, r2] eor r1, r1, #L_PTE_DIRTY tst r1, #L_PTE_DIRTY|L_PTE_RDONLY orrne r3, r3, #PTE_EXT_APX tst r1, #L_PTE_USER orrne r3, r3, #PTE_EXT_AP1 tstne r3, #PTE_EXT_APX @ user read-only -> kernel read-only bicne r3, r3, #PTE_EXT_AP0 tst r1, #L_PTE_XN orrne r3, r3, #PTE_EXT_XN eor r3, r3, r2 tst r1, #L_PTE_YOUNG tstne r1, #L_PTE_PRESENT moveq r3, #0 tstne r1, #L_PTE_NONE movne r3, #0 str r3, [r0] mcr p15, 0, r0, c7, c10, 1 @ flush_pte .endm /* * The ARMv3, ARMv4 and ARMv5 set_pte_ext translation function, * covering most CPUs except Xscale and Xscale 3. * * Permission translation: * YUWD AP SVC User * 0xxx 0x00 no acc no acc * 100x 0x00 r/o no acc * 10x0 0x00 r/o no acc * 1011 0x55 r/w no acc * 110x 0xaa r/w r/o * 11x0 0xaa r/w r/o * 1111 0xff r/w r/w */ .macro armv3_set_pte_ext wc_disable=1 str r1, [r0], #2048 @ linux version eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY bic r2, r1, #PTE_SMALL_AP_MASK @ keep C, B bits bic r2, r2, #PTE_TYPE_MASK orr r2, r2, #PTE_TYPE_SMALL tst r3, #L_PTE_USER @ user? orrne r2, r2, #PTE_SMALL_AP_URO_SRW tst r3, #L_PTE_RDONLY | L_PTE_DIRTY @ write and dirty? orreq r2, r2, #PTE_SMALL_AP_UNO_SRW tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young? movne r2, #0 .if \wc_disable #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH tst r2, #PTE_CACHEABLE bicne r2, r2, #PTE_BUFFERABLE #endif .endif str r2, [r0] @ hardware version .endm /* * Xscale set_pte_ext translation, split into two halves to cope * with work-arounds. r3 must be preserved by code between these * two macros. * * Permission translation: * YUWD AP SVC User * 0xxx 00 no acc no acc * 100x 00 r/o no acc * 10x0 00 r/o no acc * 1011 01 r/w no acc * 110x 10 r/w r/o * 11x0 10 r/w r/o * 1111 11 r/w r/w */ .macro xscale_set_pte_ext_prologue str r1, [r0] @ linux version eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY bic r2, r1, #PTE_SMALL_AP_MASK @ keep C, B bits orr r2, r2, #PTE_TYPE_EXT @ extended page tst r3, #L_PTE_USER @ user? orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w tst r3, #L_PTE_RDONLY | L_PTE_DIRTY @ write and dirty? orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w @ combined with user -> user r/w .endm .macro xscale_set_pte_ext_epilogue tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young? movne r2, #0 @ no -> fault str r2, [r0, #2048]! @ hardware version mov ip, #0 mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line mcr p15, 0, ip, c7, c10, 4 @ data write barrier .endm .macro define_processor_functions name:req, dabort:req, pabort:req, nommu=0, suspend=0 .type \name\()_processor_functions, #object .align 2 ENTRY(\name\()_processor_functions) .word \dabort .word \pabort .word cpu_\name\()_proc_init .word cpu_\name\()_proc_fin .word cpu_\name\()_reset .word cpu_\name\()_do_idle .word cpu_\name\()_dcache_clean_area .word cpu_\name\()_switch_mm .if \nommu .word 0 .else .word cpu_\name\()_set_pte_ext .endif .if \suspend .word cpu_\name\()_suspend_size #ifdef CONFIG_ARM_CPU_SUSPEND .word cpu_\name\()_do_suspend .word cpu_\name\()_do_resume #else .word 0 .word 0 #endif .else .word 0 .word 0 .word 0 .endif .size \name\()_processor_functions, . - \name\()_processor_functions .endm .macro define_cache_functions name:req .align 2 .type \name\()_cache_fns, #object ENTRY(\name\()_cache_fns) .long \name\()_flush_icache_all .long \name\()_flush_kern_cache_all .long \name\()_flush_kern_cache_louis .long \name\()_flush_user_cache_all .long \name\()_flush_user_cache_range .long \name\()_coherent_kern_range .long \name\()_coherent_user_range .long \name\()_flush_kern_dcache_area .long \name\()_dma_map_area .long \name\()_dma_unmap_area .long \name\()_dma_flush_range .size \name\()_cache_fns, . - \name\()_cache_fns .endm .macro define_tlb_functions name:req, flags_up:req, flags_smp .type \name\()_tlb_fns, #object ENTRY(\name\()_tlb_fns) .long \name\()_flush_user_tlb_range .long \name\()_flush_kern_tlb_range .ifnb \flags_smp ALT_SMP(.long \flags_smp ) ALT_UP(.long \flags_up ) .else .long \flags_up .endif .size \name\()_tlb_fns, . - \name\()_tlb_fns .endm .macro globl_equ x, y .globl \x .equ \x, \y .endm .macro initfn, func, base .long \func - \base .endm /* * Macro to calculate the log2 size for the protection region * registers. This calculates rd = log2(size) - 1. tmp must * not be the same register as rd. */ .macro pr_sz, rd, size, tmp mov \tmp, \size, lsr #12 mov \rd, #11 1: movs \tmp, \tmp, lsr #1 addne \rd, \rd, #1 bne 1b .endm /* * Macro to generate a protection region register value * given a pre-masked address, size, and enable bit. * Corrupts size. */ .macro pr_val, dest, addr, size, enable pr_sz \dest, \size, \size @ calculate log2(size) - 1 orr \dest, \addr, \dest, lsl #1 @ mask in the region size orr \dest, \dest, \enable .endm