/* * linux/arch/arm/mach-realview/core.c * * Copyright (C) 1999 - 2003 ARM Limited * Copyright (C) 2000 Deep Blue Solutions Ltd * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "core.h" #define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET) static void realview_flash_set_vpp(struct platform_device *pdev, int on) { u32 val; val = __raw_readl(REALVIEW_FLASHCTRL); if (on) val |= REALVIEW_FLASHPROG_FLVPPEN; else val &= ~REALVIEW_FLASHPROG_FLVPPEN; __raw_writel(val, REALVIEW_FLASHCTRL); } static struct physmap_flash_data realview_flash_data = { .width = 4, .set_vpp = realview_flash_set_vpp, }; struct platform_device realview_flash_device = { .name = "physmap-flash", .id = 0, .dev = { .platform_data = &realview_flash_data, }, }; int realview_flash_register(struct resource *res, u32 num) { realview_flash_device.resource = res; realview_flash_device.num_resources = num; return platform_device_register(&realview_flash_device); } static struct smsc911x_platform_config smsc911x_config = { .flags = SMSC911X_USE_32BIT, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, .phy_interface = PHY_INTERFACE_MODE_MII, }; static struct smc91x_platdata smc91x_platdata = { .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT, }; static struct platform_device realview_eth_device = { .name = "smsc911x", .id = 0, .num_resources = 2, }; int realview_eth_register(const char *name, struct resource *res) { if (name) realview_eth_device.name = name; realview_eth_device.resource = res; if (strcmp(realview_eth_device.name, "smsc911x") == 0) realview_eth_device.dev.platform_data = &smsc911x_config; else realview_eth_device.dev.platform_data = &smc91x_platdata; return platform_device_register(&realview_eth_device); } struct platform_device realview_usb_device = { .name = "isp1760", .num_resources = 2, }; int realview_usb_register(struct resource *res) { realview_usb_device.resource = res; return platform_device_register(&realview_usb_device); } static struct pata_platform_info pata_platform_data = { .ioport_shift = 1, }; static struct resource pata_resources[] = { [0] = { .start = REALVIEW_CF_BASE, .end = REALVIEW_CF_BASE + 0xff, .flags = IORESOURCE_MEM, }, [1] = { .start = REALVIEW_CF_BASE + 0x100, .end = REALVIEW_CF_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, }; struct platform_device realview_cf_device = { .name = "pata_platform", .id = -1, .num_resources = ARRAY_SIZE(pata_resources), .resource = pata_resources, .dev = { .platform_data = &pata_platform_data, }, }; static struct resource realview_leds_resources[] = { { .start = REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET, .end = REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET + 4, .flags = IORESOURCE_MEM, }, }; struct platform_device realview_leds_device = { .name = "versatile-leds", .id = -1, .num_resources = ARRAY_SIZE(realview_leds_resources), .resource = realview_leds_resources, }; static struct resource realview_i2c_resource = { .start = REALVIEW_I2C_BASE, .end = REALVIEW_I2C_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }; struct platform_device realview_i2c_device = { .name = "versatile-i2c", .id = 0, .num_resources = 1, .resource = &realview_i2c_resource, }; static struct i2c_board_info realview_i2c_board_info[] = { { I2C_BOARD_INFO("ds1338", 0xd0 >> 1), }, }; static int __init realview_i2c_init(void) { return i2c_register_board_info(0, realview_i2c_board_info, ARRAY_SIZE(realview_i2c_board_info)); } arch_initcall(realview_i2c_init); #define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET) /* * This is only used if GPIOLIB support is disabled */ static unsigned int realview_mmc_status(struct device *dev) { struct amba_device *adev = container_of(dev, struct amba_device, dev); u32 mask; if (machine_is_realview_pb1176()) { static bool inserted = false; /* * The PB1176 does not have the status register, * assume it is inserted at startup, then invert * for each call so card insertion/removal will * be detected anyway. This will not be called if * GPIO on PL061 is active, which is the proper * way to do this on the PB1176. */ inserted = !inserted; return inserted ? 0 : 1; } if (adev->res.start == REALVIEW_MMCI0_BASE) mask = 1; else mask = 2; return readl(REALVIEW_SYSMCI) & mask; } struct mmci_platform_data realview_mmc0_plat_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .status = realview_mmc_status, .gpio_wp = 17, .gpio_cd = 16, .cd_invert = true, }; struct mmci_platform_data realview_mmc1_plat_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .status = realview_mmc_status, .gpio_wp = 19, .gpio_cd = 18, .cd_invert = true, }; void __init realview_init_early(void) { void __iomem *sys = __io_address(REALVIEW_SYS_BASE); versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000); } /* * CLCD support. */ #define SYS_CLCD_NLCDIOON (1 << 2) #define SYS_CLCD_VDDPOSSWITCH (1 << 3) #define SYS_CLCD_PWR3V5SWITCH (1 << 4) #define SYS_CLCD_ID_MASK (0x1f << 8) #define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8) #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8) #define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8) #define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) #define SYS_CLCD_ID_VGA (0x1f << 8) /* * Disable all display connectors on the interface module. */ static void realview_clcd_disable(struct clcd_fb *fb) { void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; u32 val; val = readl(sys_clcd); val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; writel(val, sys_clcd); } /* * Enable the relevant connector on the interface module. */ static void realview_clcd_enable(struct clcd_fb *fb) { void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; u32 val; /* * Enable the PSUs */ val = readl(sys_clcd); val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; writel(val, sys_clcd); } /* * Detect which LCD panel is connected, and return the appropriate * clcd_panel structure. Note: we do not have any information on * the required timings for the 8.4in panel, so we presently assume * VGA timings. */ static int realview_clcd_setup(struct clcd_fb *fb) { void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; const char *panel_name, *vga_panel_name; unsigned long framesize; u32 val; if (machine_is_realview_eb()) { /* VGA, 16bpp */ framesize = 640 * 480 * 2; vga_panel_name = "VGA"; } else { /* XVGA, 16bpp */ framesize = 1024 * 768 * 2; vga_panel_name = "XVGA"; } val = readl(sys_clcd) & SYS_CLCD_ID_MASK; if (val == SYS_CLCD_ID_SANYO_3_8) panel_name = "Sanyo TM38QV67A02A"; else if (val == SYS_CLCD_ID_SANYO_2_5) panel_name = "Sanyo QVGA Portrait"; else if (val == SYS_CLCD_ID_EPSON_2_2) panel_name = "Epson L2F50113T00"; else if (val == SYS_CLCD_ID_VGA) panel_name = vga_panel_name; else { pr_err("CLCD: unknown LCD panel ID 0x%08x, using VGA\n", val); panel_name = vga_panel_name; } fb->panel = versatile_clcd_get_panel(panel_name); if (!fb->panel) return -EINVAL; return versatile_clcd_setup_dma(fb, framesize); } struct clcd_board clcd_plat_data = { .name = "RealView", .caps = CLCD_CAP_ALL, .check = clcdfb_check, .decode = clcdfb_decode, .disable = realview_clcd_disable, .enable = realview_clcd_enable, .setup = realview_clcd_setup, .mmap = versatile_clcd_mmap_dma, .remove = versatile_clcd_remove_dma, }; /* * Where is the timer (VA)? */ void __iomem *timer0_va_base; void __iomem *timer1_va_base; void __iomem *timer2_va_base; void __iomem *timer3_va_base; /* * Set up the clock source and clock events devices */ void __init realview_timer_init(unsigned int timer_irq) { u32 val; /* * set clock frequency: * REALVIEW_REFCLK is 32KHz * REALVIEW_TIMCLK is 1MHz */ val = readl(__io_address(REALVIEW_SCTL_BASE)); writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) | (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) | (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) | (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val, __io_address(REALVIEW_SCTL_BASE)); /* * Initialise to a known state (all timers off) */ sp804_timer_disable(timer0_va_base); sp804_timer_disable(timer1_va_base); sp804_timer_disable(timer2_va_base); sp804_timer_disable(timer3_va_base); sp804_clocksource_init(timer3_va_base, "timer3"); sp804_clockevents_init(timer0_va_base, timer_irq, "timer0"); } /* * Setup the memory banks. */ void realview_fixup(struct tag *tags, char **from) { /* * Most RealView platforms have 512MB contiguous RAM at 0x70000000. * Half of this is mirrored at 0. */ #ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET memblock_add(0x70000000, SZ_512M); #else memblock_add(0, SZ_256M); #endif }