/* * arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c * * Marvell Orion-1-90 AP GE Reference Design Setup * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "common.h" static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = { .phy_addr = -1, .speed = SPEED_1000, .duplex = DUPLEX_FULL, }; static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = { .port_names[0] = "lan1", .port_names[1] = "lan2", .port_names[2] = "lan3", .port_names[3] = "lan4", .port_names[4] = "wan", .port_names[5] = "cpu", }; static struct dsa_platform_data rd88f6183ap_ge_switch_plat_data = { .nr_chips = 1, .chip = &rd88f6183ap_ge_switch_chip_data, }; static struct mtd_partition rd88f6183ap_ge_partitions[] = { { .name = "kernel", .offset = 0x00000000, .size = 0x00200000, }, { .name = "rootfs", .offset = 0x00200000, .size = 0x00500000, }, { .name = "nvram", .offset = 0x00700000, .size = 0x00080000, }, }; static struct flash_platform_data rd88f6183ap_ge_spi_slave_data = { .type = "m25p64", .nr_parts = ARRAY_SIZE(rd88f6183ap_ge_partitions), .parts = rd88f6183ap_ge_partitions, }; static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = { { .modalias = "m25p80", .platform_data = &rd88f6183ap_ge_spi_slave_data, .irq = NO_IRQ, .max_speed_hz = 20000000, .bus_num = 0, .chip_select = 0, }, }; static void __init rd88f6183ap_ge_init(void) { /* * Setup basic Orion functions. Need to be called early. */ orion5x_init(); /* * Configure peripherals. */ orion5x_ehci0_init(); orion5x_eth_init(&rd88f6183ap_ge_eth_data); orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data, gpio_to_irq(3)); spi_register_board_info(rd88f6183ap_ge_spi_slave_info, ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info)); orion5x_spi_init(); orion5x_uart0_init(); } static struct hw_pci rd88f6183ap_ge_pci __initdata = { .nr_controllers = 2, .setup = orion5x_pci_sys_setup, .scan = orion5x_pci_sys_scan_bus, .map_irq = orion5x_pci_map_irq, }; static int __init rd88f6183ap_ge_pci_init(void) { if (machine_is_rd88f6183ap_ge()) { orion5x_pci_disable(); pci_common_init(&rd88f6183ap_ge_pci); } return 0; } subsys_initcall(rd88f6183ap_ge_pci_init); MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design") /* Maintainer: Lennert Buytenhek */ .atag_offset = 0x100, .init_machine = rd88f6183ap_ge_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END