/* * linux/arch/arm/mach-integrator/impd1.c * * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This file provides the core support for the IM-PD1 module. * * Module / boot parameters. * lmid=n impd1.lmid=n - set the logic module position in stack to 'n' */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include static int module_id; module_param_named(lmid, module_id, int, 0444); MODULE_PARM_DESC(lmid, "logic module stack position"); struct impd1_module { void __iomem *base; }; void impd1_tweak_control(struct device *dev, u32 mask, u32 val) { struct impd1_module *impd1 = dev_get_drvdata(dev); u32 cur; val &= mask; cur = readl(impd1->base + IMPD1_CTRL) & ~mask; writel(cur | val, impd1->base + IMPD1_CTRL); } EXPORT_SYMBOL(impd1_tweak_control); /* * CLCD support */ #define PANEL PROSPECTOR #define LTM10C209 1 #define PROSPECTOR 2 #define SVGA 3 #define VGA 4 #if PANEL == VGA #define PANELTYPE vga static struct clcd_panel vga = { .mode = { .name = "VGA", .refresh = 60, .xres = 640, .yres = 480, .pixclock = 39721, .left_margin = 40, .right_margin = 24, .upper_margin = 32, .lower_margin = 11, .hsync_len = 96, .vsync_len = 2, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, }, .width = -1, .height = -1, .tim2 = TIM2_BCD | TIM2_IPC, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), .caps = CLCD_CAP_5551, .connector = IMPD1_CTRL_DISP_VGA, .bpp = 16, .grayscale = 0, }; #elif PANEL == SVGA #define PANELTYPE svga static struct clcd_panel svga = { .mode = { .name = "SVGA", .refresh = 0, .xres = 800, .yres = 600, .pixclock = 27778, .left_margin = 20, .right_margin = 20, .upper_margin = 5, .lower_margin = 5, .hsync_len = 164, .vsync_len = 62, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, }, .width = -1, .height = -1, .tim2 = TIM2_BCD, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), .connector = IMPD1_CTRL_DISP_VGA, .caps = CLCD_CAP_5551, .bpp = 16, .grayscale = 0, }; #elif PANEL == PROSPECTOR #define PANELTYPE prospector static struct clcd_panel prospector = { .mode = { .name = "PROSPECTOR", .refresh = 0, .xres = 640, .yres = 480, .pixclock = 40000, .left_margin = 33, .right_margin = 64, .upper_margin = 36, .lower_margin = 7, .hsync_len = 64, .vsync_len = 25, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, .vmode = FB_VMODE_NONINTERLACED, }, .width = -1, .height = -1, .tim2 = TIM2_BCD, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), .caps = CLCD_CAP_5551, .fixedtimings = 1, .connector = IMPD1_CTRL_DISP_LCD, .bpp = 16, .grayscale = 0, }; #elif PANEL == LTM10C209 #define PANELTYPE ltm10c209 /* * Untested. */ static struct clcd_panel ltm10c209 = { .mode = { .name = "LTM10C209", .refresh = 0, .xres = 640, .yres = 480, .pixclock = 40000, .left_margin = 20, .right_margin = 20, .upper_margin = 19, .lower_margin = 19, .hsync_len = 20, .vsync_len = 10, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, .vmode = FB_VMODE_NONINTERLACED, }, .width = -1, .height = -1, .tim2 = TIM2_BCD, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), .caps = CLCD_CAP_5551, .fixedtimings = 1, .connector = IMPD1_CTRL_DISP_LCD, .bpp = 16, .grayscale = 0, }; #endif /* * Disable all display connectors on the interface module. */ static void impd1fb_clcd_disable(struct clcd_fb *fb) { impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK, 0); } /* * Enable the relevant connector on the interface module. */ static void impd1fb_clcd_enable(struct clcd_fb *fb) { impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK, fb->panel->connector | IMPD1_CTRL_DISP_ENABLE); } static int impd1fb_clcd_setup(struct clcd_fb *fb) { unsigned long framebase = fb->dev->res.start + 0x01000000; unsigned long framesize = SZ_1M; int ret = 0; fb->panel = &PANELTYPE; if (!request_mem_region(framebase, framesize, "clcd framebuffer")) { printk(KERN_ERR "IM-PD1: unable to reserve framebuffer\n"); return -EBUSY; } fb->fb.screen_base = ioremap(framebase, framesize); if (!fb->fb.screen_base) { printk(KERN_ERR "IM-PD1: unable to map framebuffer\n"); ret = -ENOMEM; goto free_buffer; } fb->fb.fix.smem_start = framebase; fb->fb.fix.smem_len = framesize; return 0; free_buffer: release_mem_region(framebase, framesize); return ret; } static int impd1fb_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) { unsigned long start, size; start = vma->vm_pgoff + (fb->fb.fix.smem_start >> PAGE_SHIFT); size = vma->vm_end - vma->vm_start; return remap_pfn_range(vma, vma->vm_start, start, size, vma->vm_page_prot); } static void impd1fb_clcd_remove(struct clcd_fb *fb) { iounmap(fb->fb.screen_base); release_mem_region(fb->fb.fix.smem_start, fb->fb.fix.smem_len); } static struct clcd_board impd1_clcd_data = { .name = "IM-PD/1", .caps = CLCD_CAP_5551 | CLCD_CAP_888, .check = clcdfb_check, .decode = clcdfb_decode, .disable = impd1fb_clcd_disable, .enable = impd1fb_clcd_enable, .setup = impd1fb_clcd_setup, .mmap = impd1fb_clcd_mmap, .remove = impd1fb_clcd_remove, }; struct impd1_device { unsigned long offset; unsigned int irq[2]; unsigned int id; void *platform_data; }; static struct impd1_device impd1_devs[] = { { .offset = 0x03000000, .id = 0x00041190, }, { .offset = 0x00100000, .irq = { 1 }, .id = 0x00141011, }, { .offset = 0x00200000, .irq = { 2 }, .id = 0x00141011, }, { .offset = 0x00300000, .irq = { 3 }, .id = 0x00041022, }, { .offset = 0x00400000, .irq = { 4 }, .id = 0x00041061, }, { .offset = 0x00500000, .irq = { 5 }, .id = 0x00041061, }, { .offset = 0x00600000, .irq = { 6 }, .id = 0x00041130, }, { .offset = 0x00700000, .irq = { 7, 8 }, .id = 0x00041181, }, { .offset = 0x00800000, .irq = { 9 }, .id = 0x00041041, }, { .offset = 0x01000000, .irq = { 11 }, .id = 0x00041110, .platform_data = &impd1_clcd_data, } }; static int impd1_probe(struct lm_device *dev) { struct impd1_module *impd1; int i, ret; if (dev->id != module_id) return -EINVAL; if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers")) return -EBUSY; impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL); if (!impd1) { ret = -ENOMEM; goto release_lm; } impd1->base = ioremap(dev->resource.start, SZ_4K); if (!impd1->base) { ret = -ENOMEM; goto free_impd1; } lm_set_drvdata(dev, impd1); printk("IM-PD1 found at 0x%08lx\n", (unsigned long)dev->resource.start); integrator_impd1_clk_init(impd1->base, dev->id); for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) { struct impd1_device *idev = impd1_devs + i; struct amba_device *d; unsigned long pc_base; char devname[32]; pc_base = dev->resource.start + idev->offset; snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12); d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K, dev->irq, dev->irq, idev->platform_data, idev->id, &dev->resource); if (IS_ERR(d)) { dev_err(&dev->dev, "unable to register device: %ld\n", PTR_ERR(d)); continue; } } return 0; free_impd1: if (impd1 && impd1->base) iounmap(impd1->base); kfree(impd1); release_lm: release_mem_region(dev->resource.start, SZ_4K); return ret; } static int impd1_remove_one(struct device *dev, void *data) { device_unregister(dev); return 0; } static void impd1_remove(struct lm_device *dev) { struct impd1_module *impd1 = lm_get_drvdata(dev); device_for_each_child(&dev->dev, NULL, impd1_remove_one); integrator_impd1_clk_exit(dev->id); lm_set_drvdata(dev, NULL); iounmap(impd1->base); kfree(impd1); release_mem_region(dev->resource.start, SZ_4K); } static struct lm_driver impd1_driver = { .drv = { .name = "impd1", }, .probe = impd1_probe, .remove = impd1_remove, }; static int __init impd1_init(void) { return lm_driver_register(&impd1_driver); } static void __exit impd1_exit(void) { lm_driver_unregister(&impd1_driver); } module_init(impd1_init); module_exit(impd1_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Integrator/IM-PD1 logic module core driver"); MODULE_AUTHOR("Deep Blue Solutions Ltd");