/* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include #include #include #include #include #include #include "at91_aic.h" #include "board.h" #include "generic.h" #include "gpio.h" static void __init eco920_init_early(void) { /* Set cpu type: PQFP */ at91rm9200_set_type(ARCH_REVISON_9200_PQFP); at91_initialize(18432000); } static struct macb_platform_data __initdata eco920_eth_data = { .phy_irq_pin = AT91_PIN_PC2, .is_rmii = 1, }; static struct at91_usbh_data __initdata eco920_usbh_data = { .ports = 1, .vbus_pin = {-EINVAL, -EINVAL}, .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_udc_data __initdata eco920_udc_data = { .vbus_pin = AT91_PIN_PB12, .pullup_pin = AT91_PIN_PB13, }; static struct mci_platform_data __initdata eco920_mci0_data = { .slot[0] = { .bus_width = 1, .detect_pin = -EINVAL, .wp_pin = -EINVAL, }, }; static struct physmap_flash_data eco920_flash_data = { .width = 2, }; static struct resource eco920_flash_resource = { .start = 0x11000000, .end = 0x11ffffff, .flags = IORESOURCE_MEM, }; static struct platform_device eco920_flash = { .name = "physmap-flash", .id = 0, .dev = { .platform_data = &eco920_flash_data, }, .resource = &eco920_flash_resource, .num_resources = 1, }; static struct spi_board_info eco920_spi_devices[] = { { /* CAN controller */ .modalias = "tlv5638", .chip_select = 3, .max_speed_hz = 20 * 1000 * 1000, .mode = SPI_CPHA, }, }; /* * LEDs */ static struct gpio_led eco920_leds[] = { { /* D1 */ .name = "led1", .gpio = AT91_PIN_PB0, .active_low = 1, .default_trigger = "heartbeat", }, { /* D2 */ .name = "led2", .gpio = AT91_PIN_PB1, .active_low = 1, .default_trigger = "timer", } }; static void __init eco920_board_init(void) { /* DBGU on ttyS0. (Rx & Tx only */ at91_register_uart(0, 0, 0); at91_add_device_serial(); at91_add_device_eth(&eco920_eth_data); at91_add_device_usbh(&eco920_usbh_data); at91_add_device_udc(&eco920_udc_data); at91_add_device_mci(0, &eco920_mci0_data); platform_device_register(&eco920_flash); at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1) | AT91_SMC_RWSETUP_(1) | AT91_SMC_DBW_8 | AT91_SMC_WSEN | AT91_SMC_NWS_(15)); at91_set_A_periph(AT91_PIN_PC6, 1); at91_set_gpio_input(AT91_PIN_PA23, 0); at91_set_deglitch(AT91_PIN_PA23, 1); /* Initialization of the Static Memory Controller for Chip Select 3 */ at91_ramc_write(0, AT91_SMC_CSR(3), AT91_SMC_DBW_16 | /* 16 bit */ AT91_SMC_WSEN | AT91_SMC_NWS_(5) | /* wait states */ AT91_SMC_TDF_(1) /* float time */ ); at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices)); /* LEDs */ at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds)); } MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = eco920_init_early, .init_irq = at91_init_irq_default, .init_machine = eco920_board_init, MACHINE_END