/* * usb_a926x.dts - Device Tree file for Caloa USB A926x board * * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD * * Licensed under GPLv2 or later. */ / { clocks { #address-cells = <1>; #size-cells = <1>; ranges; main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; }; ahb { apb { dbgu: serial@fffff200 { status = "okay"; }; macb0: ethernet@fffc4000 { phy-mode = "rmii"; status = "okay"; }; usb1: gadget@fffa4000 { atmel,vbus-gpio = <&pioC 5 0>; status = "okay"; }; }; nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "soft"; nand-on-flash-bbt; status = "okay"; at91bootstrap@0 { label = "at91bootstrap"; reg = <0x0 0x20000>; }; barebox@20000 { label = "barebox"; reg = <0x20000 0x40000>; }; bareboxenv@60000 { label = "bareboxenv"; reg = <0x60000 0x20000>; }; bareboxenv2@80000 { label = "bareboxenv2"; reg = <0x80000 0x20000>; }; oftree@80000 { label = "oftree"; reg = <0xa0000 0x20000>; }; kernel@a0000 { label = "kernel"; reg = <0xc0000 0x400000>; }; rootfs@4a0000 { label = "rootfs"; reg = <0x4c0000 0x7800000>; }; data@7ca0000 { label = "data"; reg = <0x7cc0000 0x8340000>; }; }; usb0: ohci@00500000 { num-ports = <2>; status = "okay"; }; }; leds { compatible = "gpio-leds"; user_led { label = "user_led"; gpios = <&pioB 21 1>; linux,default-trigger = "heartbeat"; }; }; gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; user_pb { label = "user_pb"; gpios = <&pioB 10 1>; linux,code = <28>; gpio-key,wakeup; }; }; i2c@0 { status = "okay"; }; };