/dts-v1/; /include/ "kirkwood.dtsi" / { model = "ZyXEL NSA310"; compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; reg = <0x00000000 0x10000000>; }; chosen { bootargs = "console=ttyS0,115200"; }; ocp@f1000000 { pinctrl: pinctrl@10000 { pinctrl-0 = < &pmx_led_esata_green &pmx_led_esata_red &pmx_led_usb_green &pmx_led_usb_red &pmx_usb_power_off &pmx_led_sys_green &pmx_led_sys_red &pmx_btn_reset &pmx_btn_copy &pmx_led_copy_green &pmx_led_copy_red &pmx_led_hdd_green &pmx_led_hdd_red &pmx_unknown &pmx_btn_power &pmx_pwr_off >; pinctrl-names = "default"; pmx_led_esata_green: pmx-led-esata-green { marvell,pins = "mpp12"; marvell,function = "gpio"; }; pmx_led_esata_red: pmx-led-esata-red { marvell,pins = "mpp13"; marvell,function = "gpio"; }; pmx_led_usb_green: pmx-led-usb-green { marvell,pins = "mpp15"; marvell,function = "gpio"; }; pmx_led_usb_red: pmx-led-usb-red { marvell,pins = "mpp16"; marvell,function = "gpio"; }; pmx_usb_power_off: pmx-usb-power-off { marvell,pins = "mpp21"; marvell,function = "gpio"; }; pmx_led_sys_green: pmx-led-sys-green { marvell,pins = "mpp28"; marvell,function = "gpio"; }; pmx_led_sys_red: pmx-led-sys-red { marvell,pins = "mpp29"; marvell,function = "gpio"; }; pmx_btn_reset: pmx-btn-reset { marvell,pins = "mpp36"; marvell,function = "gpio"; }; pmx_btn_copy: pmx-btn-copy { marvell,pins = "mpp37"; marvell,function = "gpio"; }; pmx_led_copy_green: pmx-led-copy-green { marvell,pins = "mpp39"; marvell,function = "gpio"; }; pmx_led_copy_red: pmx-led-copy-red { marvell,pins = "mpp40"; marvell,function = "gpio"; }; pmx_led_hdd_green: pmx-led-hdd-green { marvell,pins = "mpp41"; marvell,function = "gpio"; }; pmx_led_hdd_red: pmx-led-hdd-red { marvell,pins = "mpp42"; marvell,function = "gpio"; }; pmx_unknown: pmx-unknown { marvell,pins = "mpp44"; marvell,function = "gpio"; }; pmx_btn_power: pmx-btn-power { marvell,pins = "mpp46"; marvell,function = "gpio"; }; pmx_pwr_off: pmx-pwr-off { marvell,pins = "mpp48"; marvell,function = "gpio"; }; }; serial@12000 { status = "ok"; }; sata@80000 { status = "okay"; nr-ports = <2>; }; i2c@11000 { status = "okay"; adt7476: adt7476a@2e { compatible = "adt7476"; reg = <0x2e>; }; }; nand@3000000 { status = "okay"; chip-delay = <35>; partition@0 { label = "uboot"; reg = <0x0000000 0x0100000>; read-only; }; partition@100000 { label = "uboot_env"; reg = <0x0100000 0x0080000>; }; partition@180000 { label = "key_store"; reg = <0x0180000 0x0080000>; }; partition@200000 { label = "info"; reg = <0x0200000 0x0080000>; }; partition@280000 { label = "etc"; reg = <0x0280000 0x0a00000>; }; partition@c80000 { label = "kernel_1"; reg = <0x0c80000 0x0a00000>; }; partition@1680000 { label = "rootfs1"; reg = <0x1680000 0x2fc0000>; }; partition@4640000 { label = "kernel_2"; reg = <0x4640000 0x0a00000>; }; partition@5040000 { label = "rootfs2"; reg = <0x5040000 0x2fc0000>; }; }; }; gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; button@1 { label = "Power Button"; linux,code = <116>; gpios = <&gpio1 14 0>; }; button@2 { label = "Copy Button"; linux,code = <133>; gpios = <&gpio1 5 1>; }; button@3 { label = "Reset Button"; linux,code = <0x198>; gpios = <&gpio1 4 1>; }; }; gpio-leds { compatible = "gpio-leds"; green-sys { label = "nsa310:green:sys"; gpios = <&gpio0 28 0>; }; red-sys { label = "nsa310:red:sys"; gpios = <&gpio0 29 0>; }; green-hdd { label = "nsa310:green:hdd"; gpios = <&gpio1 9 0>; }; red-hdd { label = "nsa310:red:hdd"; gpios = <&gpio1 10 0>; }; green-esata { label = "nsa310:green:esata"; gpios = <&gpio0 12 0>; }; red-esata { label = "nsa310:red:esata"; gpios = <&gpio0 13 0>; }; green-usb { label = "nsa310:green:usb"; gpios = <&gpio0 15 0>; }; red-usb { label = "nsa310:red:usb"; gpios = <&gpio0 16 0>; }; green-copy { label = "nsa310:green:copy"; gpios = <&gpio1 7 0>; }; red-copy { label = "nsa310:red:copy"; gpios = <&gpio1 8 0>; }; }; gpio_poweroff { compatible = "gpio-poweroff"; gpios = <&gpio1 16 0>; }; regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; usb0_power_off: regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "USB Power Off"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; gpio = <&gpio0 21 0>; }; }; };