/dts-v1/; /include/ "dove.dtsi" / { model = "SolidRun CuBox"; compatible = "solidrun,cubox", "marvell,dove"; memory { device_type = "memory"; reg = <0x00000000 0x40000000>; }; chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; }; leds { compatible = "gpio-leds"; pinctrl-0 = <&pmx_gpio_18>; pinctrl-names = "default"; power { label = "Power"; gpios = <&gpio0 18 1>; linux,default-trigger = "default-on"; }; }; regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; usb_power: regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "USB Power"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; regulator-always-on; regulator-boot-on; gpio = <&gpio0 1 0>; pinctrl-0 = <&pmx_gpio_1>; pinctrl-names = "default"; }; }; clocks { /* 25MHz reference crystal */ ref25: oscillator { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; }; }; ir_recv: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 19 1>; pinctrl-0 = <&pmx_gpio_19>; pinctrl-names = "default"; }; }; &uart0 { status = "okay"; }; &sata0 { status = "okay"; }; &mdio { status = "okay"; }; ð { status = "okay"; }; ðphy { compatible = "marvell,88e1310"; reg = <1>; }; &i2c0 { status = "okay"; clock-frequency = <100000>; si5351: clock-generator { compatible = "silabs,si5351a-msop"; reg = <0x60>; #address-cells = <1>; #size-cells = <0>; #clock-cells = <1>; /* connect xtal input to 25MHz reference */ clocks = <&ref25>; /* connect xtal input as source of pll0 and pll1 */ silabs,pll-source = <0 0>, <1 0>; clkout0 { reg = <0>; silabs,drive-strength = <8>; silabs,multisynth-source = <0>; silabs,clock-source = <0>; silabs,pll-master; }; clkout1 { reg = <1>; silabs,drive-strength = <8>; silabs,multisynth-source = <1>; silabs,clock-source = <0>; silabs,pll-master; }; clkout2 { reg = <2>; silabs,multisynth-source = <1>; silabs,clock-source = <0>; }; }; }; &sdio0 { status = "okay"; /* sdio0 card detect is connected to wrong pin on CuBox */ cd-gpios = <&gpio0 12 1>; pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>; }; &spi0 { status = "okay"; /* spi0.0: 4M Flash Winbond W25Q32BV */ spi-flash@0 { compatible = "st,w25q32"; spi-max-frequency = <20000000>; reg = <0>; }; };