/* * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board * * Copyright (C) 2012 Atmel, * 2012 Nicolas Ferre * * Licensed under GPLv2 or later. */ /include/ "at91sam9x5cm.dtsi" / { model = "Atmel AT91SAM9X5-EK"; compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; chosen { bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; }; ahb { apb { mmc0: mmc@f0008000 { pinctrl-0 = < &pinctrl_board_mmc0 &pinctrl_mmc0_slot0_clk_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; status = "okay"; slot@0 { reg = <0>; bus-width = <4>; cd-gpios = <&pioD 15 0>; }; }; mmc1: mmc@f000c000 { pinctrl-0 = < &pinctrl_board_mmc1 &pinctrl_mmc1_slot0_clk_cmd_dat0 &pinctrl_mmc1_slot0_dat1_3>; status = "okay"; slot@0 { reg = <0>; bus-width = <4>; cd-gpios = <&pioD 14 0>; }; }; dbgu: serial@fffff200 { status = "okay"; }; usart0: serial@f801c000 { status = "okay"; }; i2c0: i2c@f8010000 { status = "okay"; }; pinctrl@fffff400 { mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = <3 15 0x0 0x5>; /* PD15 gpio CD pin pull up and deglitch */ }; }; mmc1 { pinctrl_board_mmc1: mmc1-board { atmel,pins = <3 14 0x0 0x5>; /* PD14 gpio CD pin pull up and deglitch */ }; }; }; spi0: spi@f0000000 { status = "okay"; cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; m25p80@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; }; }; }; usb0: ohci@00600000 { status = "okay"; num-ports = <2>; atmel,vbus-gpio = <&pioD 19 1 &pioD 20 1 >; }; usb1: ehci@00700000 { status = "okay"; }; }; };