What: /sys/bus/pci/drivers/.../bind Date: December 2003 Contact: linux-pci@vger.kernel.org Description: Writing a device location to this file will cause the driver to attempt to bind to the device found at this location. This is useful for overriding default bindings. The format for the location is: DDDD:BB:DD.F. That is Domain:Bus:Device.Function and is the same as found in /sys/bus/pci/devices/. For example: # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind (Note: kernels before 2.6.28 may require echo -n). What: /sys/bus/pci/drivers/.../unbind Date: December 2003 Contact: linux-pci@vger.kernel.org Description: Writing a device location to this file will cause the driver to attempt to unbind from the device found at this location. This may be useful when overriding default bindings. The format for the location is: DDDD:BB:DD.F. That is Domain:Bus:Device.Function and is the same as found in /sys/bus/pci/devices/. For example: # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind (Note: kernels before 2.6.28 may require echo -n). What: /sys/bus/pci/drivers/.../new_id Date: December 2003 Contact: linux-pci@vger.kernel.org Description: Writing a device ID to this file will attempt to dynamically add a new device ID to a PCI device driver. This may allow the driver to support more hardware than was included in the driver's static device ID support table at compile time. The format for the device ID is: VVVV DDDD SVVV SDDD CCCC MMMM PPPP. That is Vendor ID, Device ID, Subsystem Vendor ID, Subsystem Device ID, Class, Class Mask, and Private Driver Data. The Vendor ID and Device ID fields are required, the rest are optional. Upon successfully adding an ID, the driver will probe for the device and attempt to bind to it. For example: # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id What: /sys/bus/pci/drivers/.../remove_id Date: February 2009 Contact: Chris Wright Description: Writing a device ID to this file will remove an ID that was dynamically added via the new_id sysfs entry. The format for the device ID is: VVVV DDDD SVVV SDDD CCCC MMMM. That is Vendor ID, Device ID, Subsystem Vendor ID, Subsystem Device ID, Class, and Class Mask. The Vendor ID and Device ID fields are required, the rest are optional. After successfully removing an ID, the driver will no longer support the device. This is useful to ensure auto probing won't match the driver to the device. For example: # echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id What: /sys/bus/pci/rescan Date: January 2009 Contact: Linux PCI developers Description: Writing a non-zero value to this attribute will force a rescan of all PCI buses in the system, and re-discover previously removed devices. What: /sys/bus/pci/devices/.../msi_irqs/ Date: September, 2011 Contact: Neil Horman Description: The /sys/devices/.../msi_irqs directory contains a variable set of files, with each file being named after a corresponding msi irq vector allocated to that device. What: /sys/bus/pci/devices/.../msi_irqs/ Date: September 2011 Contact: Neil Horman Description: This attribute indicates the mode that the irq vector named by the file is in (msi vs. msix) What: /sys/bus/pci/devices/.../remove Date: January 2009 Contact: Linux PCI developers Description: Writing a non-zero value to this attribute will hot-remove the PCI device and any of its children. What: /sys/bus/pci/devices/.../pci_bus/.../rescan Date: May 2011 Contact: Linux PCI developers Description: Writing a non-zero value to this attribute will force a rescan of the bus and all child buses, and re-discover devices removed earlier from this part of the device tree. What: /sys/bus/pci/devices/.../rescan Date: January 2009 Contact: Linux PCI developers Description: Writing a non-zero value to this attribute will force a rescan of the device's parent bus and all child buses, and re-discover devices removed earlier from this part of the device tree. What: /sys/bus/pci/devices/.../reset Date: July 2009 Contact: Michael S. Tsirkin Description: Some devices allow an individual function to be reset without affecting other functions in the same device. For devices that have this support, a file named reset will be present in sysfs. Writing 1 to this file will perform reset. What: /sys/bus/pci/devices/.../vpd Date: February 2008 Contact: Ben Hutchings Description: A file named vpd in a device directory will be a binary file containing the Vital Product Data for the device. It should follow the VPD format defined in PCI Specification 2.1 or 2.2, but users should consider that some devices may have malformatted data. If the underlying VPD has a writable section then the corresponding section of this file will be writable. What: /sys/bus/pci/devices/.../virtfnN Date: March 2009 Contact: Yu Zhao Description: This symbolic link appears when hardware supports the SR-IOV capability and the Physical Function driver has enabled it. The symbolic link points to the PCI device sysfs entry of the Virtual Function whose index is N (0...MaxVFs-1). What: /sys/bus/pci/devices/.../dep_link Date: March 2009 Contact: Yu Zhao Description: This symbolic link appears when hardware supports the SR-IOV capability and the Physical Function driver has enabled it, and this device has vendor specific dependencies with others. The symbolic link points to the PCI device sysfs entry of Physical Function this device depends on. What: /sys/bus/pci/devices/.../physfn Date: March 2009 Contact: Yu Zhao Description: This symbolic link appears when a device is a Virtual Function. The symbolic link points to the PCI device sysfs entry of the Physical Function this device associates with. What: /sys/bus/pci/slots/.../module Date: June 2009 Contact: linux-pci@vger.kernel.org Description: This symbolic link points to the PCI hotplug controller driver module that manages the hotplug slot. What: /sys/bus/pci/devices/.../label Date: July 2010 Contact: Narendra K , linux-bugs@dell.com Description: Reading this attribute will provide the firmware given name (SMBIOS type 41 string or ACPI _DSM string) of the PCI device. The attribute will be created only if the firmware has given a name to the PCI device. ACPI _DSM string name will be given priority if the system firmware provides SMBIOS type 41 string also. Users: Userspace applications interested in knowing the firmware assigned name of the PCI device. What: /sys/bus/pci/devices/.../index Date: July 2010 Contact: Narendra K , linux-bugs@dell.com Description: Reading this attribute will provide the firmware given instance (SMBIOS type 41 device type instance) of the PCI device. The attribute will be created only if the firmware has given an instance number to the PCI device. Users: Userspace applications interested in knowing the firmware assigned device type instance of the PCI device that can help in understanding the firmware intended order of the PCI device. What: /sys/bus/pci/devices/.../acpi_index Date: July 2010 Contact: Narendra K , linux-bugs@dell.com Description: Reading this attribute will provide the firmware given instance (ACPI _DSM instance number) of the PCI device. The attribute will be created only if the firmware has given an instance number to the PCI device. ACPI _DSM instance number will be given priority if the system firmware provides SMBIOS type 41 device type instance also. Users: Userspace applications interested in knowing the firmware assigned instance number of the PCI device that can help in understanding the firmware intended order of the PCI device. What: /sys/bus/pci/devices/.../d3cold_allowed Date: July 2012 Contact: Huang Ying Description: d3cold_allowed is bit to control whether the corresponding PCI device can be put into D3Cold state. If it is cleared, the device will never be put into D3Cold state. If it is set, the device may be put into D3Cold state if other requirements are satisfied too. Reading this attribute will show the current value of d3cold_allowed bit. Writing this attribute will set the value of d3cold_allowed bit. What: /sys/bus/pci/devices/.../sriov_totalvfs Date: November 2012 Contact: Donald Dutile Description: This file appears when a physical PCIe device supports SR-IOV. Userspace applications can read this file to determine the maximum number of Virtual Functions (VFs) a PCIe physical function (PF) can support. Typically, this is the value reported in the PF's SR-IOV extended capability structure's TotalVFs element. Drivers have the ability at probe time to reduce the value read from this file via the pci_sriov_set_totalvfs() function. What: /sys/bus/pci/devices/.../sriov_numvfs Date: November 2012 Contact: Donald Dutile Description: This file appears when a physical PCIe device supports SR-IOV. Userspace applications can read and write to this file to determine and control the enablement or disablement of Virtual Functions (VFs) on the physical function (PF). A read of this file will return the number of VFs that are enabled on this PF. A number written to this file will enable the specified number of VFs. A userspace application would typically read the file and check that the value is zero, and then write the number of VFs that should be enabled on the PF; the value written should be less than or equal to the value in the sriov_totalvfs file. A userspace application wanting to disable the VFs would write a zero to this file. The core ensures that valid values are written to this file, and returns errors when values are not valid. For example, writing a 2 to this file when sriov_numvfs is not 0 and not 2 already will return an error. Writing a 10 when the value of sriov_totalvfs is 8 will return an error.