From 3fca40c704dd013797f2c0c518f37cd2cc8e19fe Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 19 Apr 2012 17:29:42 +0000 Subject: irq: Add IRQ_TYPE_DEFAULT for use by PIC drivers This is meant typically to allow a PIC driver's irq domain map() callback to establish sane defaults for the interrupt (and make sure that the HW and the irq_desc are in sync as far as the trigger is concerned). The irq core may not call the set_trigger callback if it thinks the trigger is already set to the right setting, so we need to ensure new descriptors are properly synchronized with the hardware. Signed-off-by: Benjamin Herrenschmidt --- include/linux/irq.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/linux/irq.h b/include/linux/irq.h index 7810406f3d80..b27cfcfd3a59 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -49,6 +49,12 @@ typedef void (*irq_preflow_handler_t)(struct irq_data *data); * IRQ_TYPE_LEVEL_LOW - low level triggered * IRQ_TYPE_LEVEL_MASK - Mask to filter out the level bits * IRQ_TYPE_SENSE_MASK - Mask for all the above bits + * IRQ_TYPE_DEFAULT - For use by some PICs to ask irq_set_type + * to setup the HW to a sane default (used + * by irqdomain map() callbacks to synchronize + * the HW state and SW flags for a newly + * allocated descriptor). + * * IRQ_TYPE_PROBE - Special flag for probing in progress * * Bits which can be modified via irq_set/clear/modify_status_flags() @@ -77,6 +83,7 @@ enum { IRQ_TYPE_LEVEL_LOW = 0x00000008, IRQ_TYPE_LEVEL_MASK = (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH), IRQ_TYPE_SENSE_MASK = 0x0000000f, + IRQ_TYPE_DEFAULT = IRQ_TYPE_SENSE_MASK, IRQ_TYPE_PROBE = 0x00000010, -- cgit v1.2.3