From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/tc/lk201.c | 441 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 441 insertions(+) create mode 100644 drivers/tc/lk201.c (limited to 'drivers/tc/lk201.c') diff --git a/drivers/tc/lk201.c b/drivers/tc/lk201.c new file mode 100644 index 000000000000..cf10d5cdfb93 --- /dev/null +++ b/drivers/tc/lk201.c @@ -0,0 +1,441 @@ +/* + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999-2002 Harald Koerfgen + * Copyright (C) 2001, 2002, 2003, 2004 Maciej W. Rozycki + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "lk201.h" + +/* + * Only handle DECstations that have an LK201 interface. + * Maxine uses LK501 at the Access.Bus and various DECsystems + * have no keyboard interface at all. + */ +#define LK_IFACE (mips_machtype == MACH_DS23100 || \ + mips_machtype == MACH_DS5000_200 || \ + mips_machtype == MACH_DS5000_1XX || \ + mips_machtype == MACH_DS5000_2X0) +/* + * These use the Z8530 SCC. Others use the DZ11. + */ +#define LK_IFACE_ZS (mips_machtype == MACH_DS5000_1XX || \ + mips_machtype == MACH_DS5000_2X0) + +/* Simple translation table for the SysRq keys */ + +#ifdef CONFIG_MAGIC_SYSRQ +/* + * Actually no translation at all, at least until we figure out + * how to define SysRq for LK201 and friends. --macro + */ +unsigned char lk201_sysrq_xlate[128]; +unsigned char *kbd_sysrq_xlate = lk201_sysrq_xlate; + +unsigned char kbd_sysrq_key = -1; +#endif + +#define KEYB_LINE 3 + +static int __init lk201_init(void *); +static void __init lk201_info(void *); +static void lk201_rx_char(unsigned char, unsigned char); + +static struct dec_serial_hook lk201_hook = { + .init_channel = lk201_init, + .init_info = lk201_info, + .rx_char = NULL, + .poll_rx_char = NULL, + .poll_tx_char = NULL, + .cflags = B4800 | CS8 | CSTOPB | CLOCAL, +}; + +/* + * This is used during keyboard initialisation + */ +static unsigned char lk201_reset_string[] = { + LK_CMD_SET_DEFAULTS, + LK_CMD_MODE(LK_MODE_RPT_DOWN, 1), + LK_CMD_MODE(LK_MODE_RPT_DOWN, 2), + LK_CMD_MODE(LK_MODE_RPT_DOWN, 3), + LK_CMD_MODE(LK_MODE_RPT_DOWN, 4), + LK_CMD_MODE(LK_MODE_DOWN_UP, 5), + LK_CMD_MODE(LK_MODE_DOWN_UP, 6), + LK_CMD_MODE(LK_MODE_RPT_DOWN, 7), + LK_CMD_MODE(LK_MODE_RPT_DOWN, 8), + LK_CMD_MODE(LK_MODE_RPT_DOWN, 9), + LK_CMD_MODE(LK_MODE_RPT_DOWN, 10), + LK_CMD_MODE(LK_MODE_RPT_DOWN, 11), + LK_CMD_MODE(LK_MODE_RPT_DOWN, 12), + LK_CMD_MODE(LK_MODE_DOWN, 13), + LK_CMD_MODE(LK_MODE_RPT_DOWN, 14), + LK_CMD_DIS_KEYCLK, + LK_CMD_ENB_BELL, LK_PARAM_VOLUME(4), +}; + +static void *lk201_handle; + +static int lk201_send(unsigned char ch) +{ + if (lk201_hook.poll_tx_char(lk201_handle, ch)) { + printk(KERN_ERR "lk201: transmit timeout\n"); + return -EIO; + } + return 0; +} + +static inline int lk201_get_id(void) +{ + return lk201_send(LK_CMD_REQ_ID); +} + +static int lk201_reset(void) +{ + int i, r; + + for (i = 0; i < sizeof(lk201_reset_string); i++) { + r = lk201_send(lk201_reset_string[i]); + if (r < 0) + return r; + } + return 0; +} + +static void lk201_report(unsigned char id[6]) +{ + char *report = "lk201: keyboard attached, "; + + switch (id[2]) { + case LK_STAT_PWRUP_OK: + printk(KERN_INFO "%sself-test OK\n", report); + break; + case LK_STAT_PWRUP_KDOWN: + /* The keyboard will resend the power-up ID + after all keys are released, so we don't + bother handling the error specially. Still + there may be a short-circuit inside. + */ + printk(KERN_ERR "%skey down (stuck?), code: 0x%02x\n", + report, id[3]); + break; + case LK_STAT_PWRUP_ERROR: + printk(KERN_ERR "%sself-test failure\n", report); + break; + default: + printk(KERN_ERR "%sunknown error: 0x%02x\n", + report, id[2]); + } +} + +static void lk201_id(unsigned char id[6]) +{ + /* + * Report whether there is an LK201 or an LK401 + * The LK401 has ALT keys... + */ + switch (id[4]) { + case 1: + printk(KERN_INFO "lk201: LK201 detected\n"); + break; + case 2: + printk(KERN_INFO "lk201: LK401 detected\n"); + break; + case 3: + printk(KERN_INFO "lk201: LK443 detected\n"); + break; + case 4: + printk(KERN_INFO "lk201: LK421 detected\n"); + break; + default: + printk(KERN_WARNING + "lk201: unknown keyboard detected, ID %d\n", id[4]); + printk(KERN_WARNING "lk201: ... please report to " + "\n"); + } +} + +#define DEFAULT_KEYB_REP_DELAY (250/5) /* [5ms] */ +#define DEFAULT_KEYB_REP_RATE 30 /* [cps] */ + +static struct kbd_repeat kbdrate = { + DEFAULT_KEYB_REP_DELAY, + DEFAULT_KEYB_REP_RATE +}; + +static void parse_kbd_rate(struct kbd_repeat *r) +{ + if (r->delay <= 0) + r->delay = kbdrate.delay; + if (r->rate <= 0) + r->rate = kbdrate.rate; + + if (r->delay < 5) + r->delay = 5; + if (r->delay > 630) + r->delay = 630; + if (r->rate < 12) + r->rate = 12; + if (r->rate > 127) + r->rate = 127; + if (r->rate == 125) + r->rate = 124; +} + +static int write_kbd_rate(struct kbd_repeat *rep) +{ + int delay, rate; + int i; + + delay = rep->delay / 5; + rate = rep->rate; + for (i = 0; i < 4; i++) { + if (lk201_hook.poll_tx_char(lk201_handle, + LK_CMD_RPT_RATE(i))) + return 1; + if (lk201_hook.poll_tx_char(lk201_handle, + LK_PARAM_DELAY(delay))) + return 1; + if (lk201_hook.poll_tx_char(lk201_handle, + LK_PARAM_RATE(rate))) + return 1; + } + return 0; +} + +static int lk201_kbd_rate(struct kbd_repeat *rep) +{ + if (rep == NULL) + return -EINVAL; + + parse_kbd_rate(rep); + + if (write_kbd_rate(rep)) { + memcpy(rep, &kbdrate, sizeof(struct kbd_repeat)); + return -EIO; + } + + memcpy(&kbdrate, rep, sizeof(struct kbd_repeat)); + + return 0; +} + +static void lk201_kd_mksound(unsigned int hz, unsigned int ticks) +{ + if (!ticks) + return; + + /* + * Can't set frequency and we "approximate" + * duration by volume. ;-) + */ + ticks /= HZ / 32; + if (ticks > 7) + ticks = 7; + ticks = 7 - ticks; + + if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_ENB_BELL)) + return; + if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_VOLUME(ticks))) + return; + if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_BELL)) + return; +} + +void kbd_leds(unsigned char leds) +{ + unsigned char l = 0; + + if (!lk201_handle) /* FIXME */ + return; + + /* FIXME -- Only Hold and Lock LEDs for now. --macro */ + if (leds & LED_SCR) + l |= LK_LED_HOLD; + if (leds & LED_CAP) + l |= LK_LED_LOCK; + + if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_ON)) + return; + if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(l))) + return; + if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_OFF)) + return; + if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(~l))) + return; +} + +int kbd_setkeycode(unsigned int scancode, unsigned int keycode) +{ + return -EINVAL; +} + +int kbd_getkeycode(unsigned int scancode) +{ + return -EINVAL; +} + +int kbd_translate(unsigned char scancode, unsigned char *keycode, + char raw_mode) +{ + *keycode = scancode; + return 1; +} + +char kbd_unexpected_up(unsigned char keycode) +{ + return 0x80; +} + +static void lk201_rx_char(unsigned char ch, unsigned char fl) +{ + static unsigned char id[6]; + static int id_i; + + static int shift_state = 0; + static int prev_scancode; + unsigned char c = scancodeRemap[ch]; + + if (fl != TTY_NORMAL && fl != TTY_OVERRUN) { + printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n", fl); + return; + } + + /* Assume this is a power-up ID. */ + if (ch == LK_STAT_PWRUP_ID && !id_i) { + id[id_i++] = ch; + return; + } + + /* Handle the power-up sequence. */ + if (id_i) { + id[id_i++] = ch; + if (id_i == 4) { + /* OK, the power-up concluded. */ + lk201_report(id); + if (id[2] == LK_STAT_PWRUP_OK) + lk201_get_id(); + else { + id_i = 0; + printk(KERN_ERR "lk201: keyboard power-up " + "error, skipping initialization\n"); + } + } else if (id_i == 6) { + /* We got the ID; report it and start operation. */ + id_i = 0; + lk201_id(id); + lk201_reset(); + } + return; + } + + /* Everything else is a scancode/status response. */ + id_i = 0; + switch (ch) { + case LK_STAT_RESUME_ERR: + case LK_STAT_ERROR: + case LK_STAT_INHIBIT_ACK: + case LK_STAT_TEST_ACK: + case LK_STAT_MODE_KEYDOWN: + case LK_STAT_MODE_ACK: + break; + case LK_KEY_LOCK: + shift_state ^= LK_LOCK; + handle_scancode(c, (shift_state & LK_LOCK) ? 1 : 0); + break; + case LK_KEY_SHIFT: + shift_state ^= LK_SHIFT; + handle_scancode(c, (shift_state & LK_SHIFT) ? 1 : 0); + break; + case LK_KEY_CTRL: + shift_state ^= LK_CTRL; + handle_scancode(c, (shift_state & LK_CTRL) ? 1 : 0); + break; + case LK_KEY_COMP: + shift_state ^= LK_COMP; + handle_scancode(c, (shift_state & LK_COMP) ? 1 : 0); + break; + case LK_KEY_RELEASE: + if (shift_state & LK_SHIFT) + handle_scancode(scancodeRemap[LK_KEY_SHIFT], 0); + if (shift_state & LK_CTRL) + handle_scancode(scancodeRemap[LK_KEY_CTRL], 0); + if (shift_state & LK_COMP) + handle_scancode(scancodeRemap[LK_KEY_COMP], 0); + if (shift_state & LK_LOCK) + handle_scancode(scancodeRemap[LK_KEY_LOCK], 0); + shift_state = 0; + break; + case LK_KEY_REPEAT: + handle_scancode(prev_scancode, 1); + break; + default: + prev_scancode = c; + handle_scancode(c, 1); + break; + } + tasklet_schedule(&keyboard_tasklet); +} + +static void __init lk201_info(void *handle) +{ +} + +static int __init lk201_init(void *handle) +{ + /* First install handlers. */ + lk201_handle = handle; + kbd_rate = lk201_kbd_rate; + kd_mksound = lk201_kd_mksound; + + lk201_hook.rx_char = lk201_rx_char; + + /* Then just issue a reset -- the handlers will do the rest. */ + lk201_send(LK_CMD_POWER_UP); + + return 0; +} + +void __init kbd_init_hw(void) +{ + /* Maxine uses LK501 at the Access.Bus. */ + if (!LK_IFACE) + return; + + printk(KERN_INFO "lk201: DECstation LK keyboard driver v0.05.\n"); + + if (LK_IFACE_ZS) { + /* + * kbd_init_hw() is being called before + * rs_init() so just register the kbd hook + * and let zs_init do the rest :-) + */ + if (!register_dec_serial_hook(KEYB_LINE, &lk201_hook)) + unregister_dec_serial_hook(KEYB_LINE); + } else { + /* + * TODO: modify dz.c to allow similar hooks + * for LK201 handling on DS2100, DS3100, and DS5000/200 + */ + printk(KERN_ERR "lk201: support for DZ11 not yet ready.\n"); + } +} -- cgit v1.2.3