From 7287d765d5f2e946fdffbcba36088c44ebb35912 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Thu, 7 Feb 2008 00:15:09 -0800 Subject: dz: update kconfig description Reformat the Kconfig entries and update descriptions for accuracy. Select the driver by default for configurations of interest. For the curious: 32BIT means only 32-bit DECstations support the device, not that the driver is not 64-bit clean; I have not checked that either though. Signed-off-by: Maciej W. Rozycki Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/Kconfig | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 6a44fb1dc167..50d6e2214ddf 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -465,20 +465,24 @@ config SERIAL_DZ bool "DECstation DZ serial driver" depends on MACH_DECSTATION && 32BIT select SERIAL_CORE - help - DZ11-family serial controllers for VAXstations, including the - DC7085, M7814, and M7819. + default y + ---help--- + DZ11-family serial controllers for DECstations and VAXstations, + including the DC7085, M7814, and M7819. config SERIAL_DZ_CONSOLE bool "Support console on DECstation DZ serial driver" depends on SERIAL_DZ=y select SERIAL_CORE_CONSOLE - help + default y + ---help--- If you say Y here, it will be possible to use a serial port as the system console (the system console is the device which receives all kernel messages and warnings and which allows logins in single user - mode). Note that the firmware uses ttyS0 as the serial console on - the Maxine and ttyS2 on the others. + mode). + + Note that the firmware uses ttyS3 as the serial console on + DECstations that use this driver. If unsure, say Y. -- cgit v1.2.3