From d3e89bac7155341d3cfe58e76842a2a9729e6e41 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Sat, 31 Aug 2013 21:40:24 +0530 Subject: [SCSI] ufs: configure the attribute for power mode UIC attributes can be set with using DME_SET command for power mode change. For configuration the link capability attributes are used, which is updated after successful link startup. Signed-off-by: Seungwon Jeon Reviewed-by: Subhash Jadavani Signed-off-by: Santosh Y Signed-off-by: James Bottomley --- drivers/scsi/ufs/ufshcd.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/ufs/unipro.h | 21 +++++++++++++++ 2 files changed, 87 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 1788d9cc571b..04884d663e4e 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -1531,6 +1531,70 @@ out: return ret; } +/** + * ufshcd_config_max_pwr_mode - Set & Change power mode with + * maximum capability attribute information. + * @hba: per adapter instance + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_config_max_pwr_mode(struct ufs_hba *hba) +{ + enum {RX = 0, TX = 1}; + u32 lanes[] = {1, 1}; + u32 gear[] = {1, 1}; + u8 pwr[] = {FASTAUTO_MODE, FASTAUTO_MODE}; + int ret; + + /* Get the connected lane count */ + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES), &lanes[RX]); + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), &lanes[TX]); + + /* + * First, get the maximum gears of HS speed. + * If a zero value, it means there is no HSGEAR capability. + * Then, get the maximum gears of PWM speed. + */ + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &gear[RX]); + if (!gear[RX]) { + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), &gear[RX]); + pwr[RX] = SLOWAUTO_MODE; + } + + ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &gear[TX]); + if (!gear[TX]) { + ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), + &gear[TX]); + pwr[TX] = SLOWAUTO_MODE; + } + + /* + * Configure attributes for power mode change with below. + * - PA_RXGEAR, PA_ACTIVERXDATALANES, PA_RXTERMINATION, + * - PA_TXGEAR, PA_ACTIVETXDATALANES, PA_TXTERMINATION, + * - PA_HSSERIES + */ + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), gear[RX]); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES), lanes[RX]); + if (pwr[RX] == FASTAUTO_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), TRUE); + + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), gear[TX]); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES), lanes[TX]); + if (pwr[TX] == FASTAUTO_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), TRUE); + + if (pwr[RX] == FASTAUTO_MODE || pwr[TX] == FASTAUTO_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES), PA_HS_MODE_B); + + ret = ufshcd_uic_change_pwr_mode(hba, pwr[RX] << 4 | pwr[TX]); + if (ret) + dev_err(hba->dev, + "pwr_mode: power mode change failed %d\n", ret); + + return ret; +} + /** * ufshcd_complete_dev_init() - checks device readiness * hba: per-adapter instance @@ -2662,6 +2726,8 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie) if (ret) goto out; + ufshcd_config_max_pwr_mode(hba); + ret = ufshcd_verify_dev_init(hba); if (ret) goto out; diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h index 3a710eb3ec20..0bb8041c047a 100644 --- a/drivers/scsi/ufs/unipro.h +++ b/drivers/scsi/ufs/unipro.h @@ -72,6 +72,21 @@ #define PA_STALLNOCONFIGTIME 0x15A3 #define PA_SAVECONFIGTIME 0x15A4 +/* PA power modes */ +enum { + FAST_MODE = 1, + SLOW_MODE = 2, + FASTAUTO_MODE = 4, + SLOWAUTO_MODE = 5, + UNCHANGED = 7, +}; + +/* PA TX/RX Frequency Series */ +enum { + PA_HS_MODE_A = 1, + PA_HS_MODE_B = 2, +}; + /* * Data Link Layer Attributes */ @@ -127,4 +142,10 @@ #define T_TC0TXMAXSDUSIZE 0x4060 #define T_TC1TXMAXSDUSIZE 0x4061 +/* Boolean attribute values */ +enum { + FALSE = 0, + TRUE, +}; + #endif /* _UNIPRO_H_ */ -- cgit v1.2.3