From 618a5230b8fa62bc7901b8b754b4379b3fcfa0f9 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 12 Jun 2012 13:54:36 -0400 Subject: [SCSI] lpfc 8.3.32: Correct provisioning change failure on local function Fixed system held-up when performing resource provsion through same PCI function Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 4 ++ drivers/scsi/lpfc/lpfc_crtn.h | 4 +- drivers/scsi/lpfc/lpfc_hbadisc.c | 2 +- drivers/scsi/lpfc/lpfc_init.c | 122 ++++++++++++++++++++++++++------------- drivers/scsi/lpfc/lpfc_scsi.c | 2 +- drivers/scsi/lpfc/lpfc_sli.c | 10 +++- 6 files changed, 98 insertions(+), 46 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index e5da6da20f8a..a65c05a8d488 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -96,6 +96,10 @@ struct lpfc_sli2_slim; /* queue dump line buffer size */ #define LPFC_LBUF_SZ 128 +/* mailbox system shutdown options */ +#define LPFC_MBX_NO_WAIT 0 +#define LPFC_MBX_WAIT 1 + enum lpfc_polling_flags { ENABLE_FCP_RING_POLLING = 0x1, DISABLE_FCP_RING_INT = 0x2 diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 9b2a16f3bc79..8a2a514a2553 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -183,7 +183,7 @@ int lpfc_post_buffer(struct lpfc_hba *, struct lpfc_sli_ring *, int); void lpfc_decode_firmware_rev(struct lpfc_hba *, char *, int); int lpfc_online(struct lpfc_hba *); void lpfc_unblock_mgmt_io(struct lpfc_hba *); -void lpfc_offline_prep(struct lpfc_hba *); +void lpfc_offline_prep(struct lpfc_hba *, int); void lpfc_offline(struct lpfc_hba *); void lpfc_reset_hba(struct lpfc_hba *); @@ -273,7 +273,7 @@ int lpfc_sli_host_down(struct lpfc_vport *); int lpfc_sli_hba_down(struct lpfc_hba *); int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t); int lpfc_sli_handle_mb_event(struct lpfc_hba *); -void lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *); +void lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *, int); int lpfc_sli_check_eratt(struct lpfc_hba *); void lpfc_sli_handle_slow_ring_event(struct lpfc_hba *, struct lpfc_sli_ring *, uint32_t); diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 5bb269e224f6..9b4f92941dce 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -530,7 +530,7 @@ lpfc_work_list_done(struct lpfc_hba *phba) break; case LPFC_EVT_OFFLINE_PREP: if (phba->link_state >= LPFC_LINK_DOWN) - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); *(int *)(evtp->evt_arg1) = 0; complete((struct completion *)(evtp->evt_arg2)); break; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index a79e2c21c5e4..374c102643fe 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -73,6 +73,8 @@ static int lpfc_hba_down_post_s4(struct lpfc_hba *phba); static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *); static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *); static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *); +static void lpfc_sli4_disable_intr(struct lpfc_hba *); +static uint32_t lpfc_sli4_enable_intr(struct lpfc_hba *, uint32_t); static struct scsi_transport_template *lpfc_transport_template = NULL; static struct scsi_transport_template *lpfc_vport_transport_template = NULL; @@ -1169,7 +1171,7 @@ lpfc_offline_eratt(struct lpfc_hba *phba) spin_lock_irq(&phba->hbalock); psli->sli_flag &= ~LPFC_SLI_ACTIVE; spin_unlock_irq(&phba->hbalock); - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT); lpfc_offline(phba); lpfc_reset_barrier(phba); @@ -1193,7 +1195,7 @@ lpfc_offline_eratt(struct lpfc_hba *phba) static void lpfc_sli4_offline_eratt(struct lpfc_hba *phba) { - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT); lpfc_offline(phba); lpfc_sli4_brdreset(phba); lpfc_hba_down_post(phba); @@ -1251,7 +1253,7 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba) * There was a firmware error. Take the hba offline and then * attempt to restart it. */ - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); lpfc_offline(phba); /* Wait for the ER1 bit to clear.*/ @@ -1372,7 +1374,7 @@ lpfc_handle_eratt_s3(struct lpfc_hba *phba) * There was a firmware error. Take the hba offline and then * attempt to restart it. */ - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT); lpfc_offline(phba); lpfc_sli_brdrestart(phba); if (lpfc_online(phba) == 0) { /* Initialize the HBA */ @@ -1427,6 +1429,54 @@ lpfc_handle_eratt_s3(struct lpfc_hba *phba) return; } +/** + * lpfc_sli4_port_sta_fn_reset - The SLI4 function reset due to port status reg + * @phba: pointer to lpfc hba data structure. + * @mbx_action: flag for mailbox shutdown action. + * + * This routine is invoked to perform an SLI4 port PCI function reset in + * response to port status register polling attention. It waits for port + * status register (ERR, RDY, RN) bits before proceeding with function reset. + * During this process, interrupt vectors are freed and later requested + * for handling possible port resource change. + **/ +static int +lpfc_sli4_port_sta_fn_reset(struct lpfc_hba *phba, int mbx_action) +{ + int rc; + uint32_t intr_mode; + + /* + * On error status condition, driver need to wait for port + * ready before performing reset. + */ + rc = lpfc_sli4_pdev_status_reg_wait(phba); + if (!rc) { + /* need reset: attempt for port recovery */ + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2887 Reset Needed: Attempting Port " + "Recovery...\n"); + lpfc_offline_prep(phba, mbx_action); + lpfc_offline(phba); + /* release interrupt for possible resource change */ + lpfc_sli4_disable_intr(phba); + lpfc_sli_brdrestart(phba); + /* request and enable interrupt */ + intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode); + if (intr_mode == LPFC_INTR_ERROR) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3175 Failed to enable interrupt\n"); + return -EIO; + } else { + phba->intr_mode = intr_mode; + } + rc = lpfc_online(phba); + if (rc == 0) + lpfc_unblock_mgmt_io(phba); + } + return rc; +} + /** * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler * @phba: pointer to lpfc hba data structure. @@ -1506,30 +1556,18 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba) reg_err2 == SLIPORT_ERR2_REG_FUNC_PROVISON) lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "3145 Port Down: Provisioning\n"); - /* - * On error status condition, driver need to wait for port - * ready before performing reset. - */ - rc = lpfc_sli4_pdev_status_reg_wait(phba); - if (!rc) { - /* need reset: attempt for port recovery */ - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "2887 Reset Needed: Attempting Port " - "Recovery...\n"); - lpfc_offline_prep(phba); - lpfc_offline(phba); - lpfc_sli_brdrestart(phba); - if (lpfc_online(phba) == 0) { - lpfc_unblock_mgmt_io(phba); - /* don't report event on forced debug dump */ - if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 && - reg_err2 == SLIPORT_ERR2_REG_FORCED_DUMP) - return; - else - break; - } - /* fall through for not able to recover */ + + /* Check port status register for function reset */ + rc = lpfc_sli4_port_sta_fn_reset(phba, LPFC_MBX_NO_WAIT); + if (rc == 0) { + /* don't report event on forced debug dump */ + if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 && + reg_err2 == SLIPORT_ERR2_REG_FORCED_DUMP) + return; + else + break; } + /* fall through for not able to recover */ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "3152 Unrecoverable error, bring the port " "offline\n"); @@ -2494,15 +2532,19 @@ lpfc_stop_hba_timers(struct lpfc_hba *phba) * driver prepares the HBA interface for online or offline. **/ static void -lpfc_block_mgmt_io(struct lpfc_hba * phba) +lpfc_block_mgmt_io(struct lpfc_hba *phba, int mbx_action) { unsigned long iflag; uint8_t actcmd = MBX_HEARTBEAT; unsigned long timeout; - timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies; spin_lock_irqsave(&phba->hbalock, iflag); phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO; + spin_unlock_irqrestore(&phba->hbalock, iflag); + if (mbx_action == LPFC_MBX_NO_WAIT) + return; + timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies; + spin_lock_irqsave(&phba->hbalock, iflag); if (phba->sli.mbox_active) { actcmd = phba->sli.mbox_active->u.mb.mbxCommand; /* Determine how long we might wait for the active mailbox @@ -2592,7 +2634,7 @@ lpfc_online(struct lpfc_hba *phba) lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, "0458 Bring Adapter online\n"); - lpfc_block_mgmt_io(phba); + lpfc_block_mgmt_io(phba, LPFC_MBX_WAIT); if (!lpfc_sli_queue_setup(phba)) { lpfc_unblock_mgmt_io(phba); @@ -2660,7 +2702,7 @@ lpfc_unblock_mgmt_io(struct lpfc_hba * phba) * queue to make it ready to be brought offline. **/ void -lpfc_offline_prep(struct lpfc_hba * phba) +lpfc_offline_prep(struct lpfc_hba *phba, int mbx_action) { struct lpfc_vport *vport = phba->pport; struct lpfc_nodelist *ndlp, *next_ndlp; @@ -2671,7 +2713,7 @@ lpfc_offline_prep(struct lpfc_hba * phba) if (vport->fc_flag & FC_OFFLINE_MODE) return; - lpfc_block_mgmt_io(phba); + lpfc_block_mgmt_io(phba, mbx_action); lpfc_linkdown(phba); @@ -2718,7 +2760,7 @@ lpfc_offline_prep(struct lpfc_hba * phba) } lpfc_destroy_vport_work_array(phba, vports); - lpfc_sli_mbox_sys_shutdown(phba); + lpfc_sli_mbox_sys_shutdown(phba, mbx_action); } /** @@ -4312,7 +4354,7 @@ lpfc_reset_hba(struct lpfc_hba *phba) phba->link_state = LPFC_HBA_ERROR; return; } - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); lpfc_offline(phba); lpfc_sli_brdrestart(phba); lpfc_online(phba); @@ -8890,7 +8932,7 @@ lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg) "0473 PCI device Power Management suspend.\n"); /* Bring down the device */ - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); lpfc_offline(phba); kthread_stop(phba->worker_thread); @@ -9016,7 +9058,7 @@ lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba) "2710 PCI channel disable preparing for reset\n"); /* Block any management I/Os to the device */ - lpfc_block_mgmt_io(phba); + lpfc_block_mgmt_io(phba, LPFC_MBX_WAIT); /* Block all SCSI devices' I/Os on the host */ lpfc_scsi_dev_block(phba); @@ -9160,7 +9202,7 @@ lpfc_io_slot_reset_s3(struct pci_dev *pdev) phba->intr_mode = intr_mode; /* Take device offline, it will perform cleanup */ - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); lpfc_offline(phba); lpfc_sli_brdrestart(phba); @@ -9634,7 +9676,7 @@ lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg) "2843 PCI device Power Management suspend.\n"); /* Bring down the device */ - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); lpfc_offline(phba); kthread_stop(phba->worker_thread); @@ -9760,7 +9802,7 @@ lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba) "2826 PCI channel disable preparing for reset\n"); /* Block any management I/Os to the device */ - lpfc_block_mgmt_io(phba); + lpfc_block_mgmt_io(phba, LPFC_MBX_NO_WAIT); /* Block all SCSI devices' I/Os on the host */ lpfc_scsi_dev_block(phba); @@ -9933,7 +9975,7 @@ lpfc_io_resume_s4(struct pci_dev *pdev) */ if (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE)) { /* Perform device reset */ - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); lpfc_offline(phba); lpfc_sli_brdrestart(phba); /* Bring the device back online */ diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 66e09069f281..d2ef8f4e9254 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -4982,7 +4982,7 @@ lpfc_host_reset_handler(struct scsi_cmnd *cmnd) struct lpfc_hba *phba = vport->phba; int rc, ret = SUCCESS; - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); lpfc_offline(phba); rc = lpfc_sli_brdrestart(phba); if (rc) diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 3e4f8eaa1fb8..3333e64703a3 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -8984,7 +8984,7 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) int i; /* Shutdown the mailbox command sub-system */ - lpfc_sli_mbox_sys_shutdown(phba); + lpfc_sli_mbox_sys_shutdown(phba, LPFC_MBX_WAIT); lpfc_hba_down_prep(phba); @@ -9996,11 +9996,17 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq, * sub-system flush routine to gracefully bring down mailbox sub-system. **/ void -lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba) +lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba, int mbx_action) { struct lpfc_sli *psli = &phba->sli; unsigned long timeout; + if (mbx_action == LPFC_MBX_NO_WAIT) { + /* delay 100ms for port state */ + msleep(100); + lpfc_sli_mbox_sys_flush(phba); + return; + } timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies; spin_lock_irq(&phba->hbalock); -- cgit v1.2.3