From f6878e39c726e13e1d0dfed863dcce81810e4a56 Mon Sep 17 00:00:00 2001 From: Akeem G Abodunrin Date: Wed, 28 Aug 2013 02:23:09 +0000 Subject: igb: Get speed and duplex for 1G non_copper devices This patch changes how we get speed/duplex for non_copper devices; it now uses pcs register to get current speed and duplex instead of using generic status register that we use to detect speed/duplex for copper devices. Signed-off-by: Akeem G Abodunrin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/e1000_82575.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 68dd7c8624c9..79b58353d849 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -1140,6 +1140,31 @@ static s32 igb_get_cfg_done_82575(struct e1000_hw *hw) return ret_val; } +/** + * igb_get_link_up_info_82575 - Get link speed/duplex info + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * This is a wrapper function, if using the serial gigabit media independent + * interface, use PCS to retrieve the link speed and duplex information. + * Otherwise, use the generic function to get the link speed and duplex info. + **/ +static s32 igb_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, + u16 *duplex) +{ + s32 ret_val; + + if (hw->phy.media_type != e1000_media_type_copper) + ret_val = igb_get_pcs_speed_and_duplex_82575(hw, speed, + duplex); + else + ret_val = igb_get_speed_and_duplex_copper(hw, speed, + duplex); + + return ret_val; +} + /** * igb_check_for_link_82575 - Check for link * @hw: pointer to the HW structure @@ -2723,7 +2748,7 @@ static struct e1000_mac_operations e1000_mac_ops_82575 = { .check_for_link = igb_check_for_link_82575, .rar_set = igb_rar_set, .read_mac_addr = igb_read_mac_addr_82575, - .get_speed_and_duplex = igb_get_speed_and_duplex_copper, + .get_speed_and_duplex = igb_get_link_up_info_82575, #ifdef CONFIG_IGB_HWMON .get_thermal_sensor_data = igb_get_thermal_sensor_data_generic, .init_thermal_sensor_thresh = igb_init_thermal_sensor_thresh_generic, -- cgit v1.2.3