From 1640eaecc4c5f62c73a87445a55c0f0cbe3b4579 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 7 Mar 2012 03:54:50 -0800 Subject: hwmon: (pmbus/zl6100) Add support for VMON/VDRV Some of the ZL6100 compatible chips support monitoring a separate voltage pin, VMON (ZL2004) or VDRV (ZL91xx). Report it as in2 / vmon. The chips support implicit warning limits for VMON/VDRV, as percentage of the respective critical voltage. Support by reading/writing the critical voltages and calculating the associated warning voltages. Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/zl6100.c | 176 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 168 insertions(+), 8 deletions(-) (limited to 'drivers/hwmon/pmbus') diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c index fc5eed8e85bb..819644121259 100644 --- a/drivers/hwmon/pmbus/zl6100.c +++ b/drivers/hwmon/pmbus/zl6100.c @@ -2,6 +2,7 @@ * Hardware monitoring driver for ZL6100 and compatibles * * Copyright (c) 2011 Ericsson AB. + * Copyright (c) 2012 Guenter Roeck * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -45,12 +46,87 @@ struct zl6100_data { #define ZL6100_MFR_XTEMP_ENABLE (1 << 7) +#define MFR_VMON_OV_FAULT_LIMIT 0xf5 +#define MFR_VMON_UV_FAULT_LIMIT 0xf6 +#define MFR_READ_VMON 0xf7 + +#define VMON_UV_WARNING (1 << 5) +#define VMON_OV_WARNING (1 << 4) +#define VMON_UV_FAULT (1 << 1) +#define VMON_OV_FAULT (1 << 0) + #define ZL6100_WAIT_TIME 1000 /* uS */ static ushort delay = ZL6100_WAIT_TIME; module_param(delay, ushort, 0644); MODULE_PARM_DESC(delay, "Delay between chip accesses in uS"); +/* Convert linear sensor value to milli-units */ +static long zl6100_l2d(s16 l) +{ + s16 exponent; + s32 mantissa; + long val; + + exponent = l >> 11; + mantissa = ((s16)((l & 0x7ff) << 5)) >> 5; + + val = mantissa; + + /* scale result to milli-units */ + val = val * 1000L; + + if (exponent >= 0) + val <<= exponent; + else + val >>= -exponent; + + return val; +} + +#define MAX_MANTISSA (1023 * 1000) +#define MIN_MANTISSA (511 * 1000) + +static u16 zl6100_d2l(long val) +{ + s16 exponent = 0, mantissa; + bool negative = false; + + /* simple case */ + if (val == 0) + return 0; + + if (val < 0) { + negative = true; + val = -val; + } + + /* Reduce large mantissa until it fits into 10 bit */ + while (val >= MAX_MANTISSA && exponent < 15) { + exponent++; + val >>= 1; + } + /* Increase small mantissa to improve precision */ + while (val < MIN_MANTISSA && exponent > -15) { + exponent--; + val <<= 1; + } + + /* Convert mantissa from milli-units to units */ + mantissa = DIV_ROUND_CLOSEST(val, 1000); + + /* Ensure that resulting number is within range */ + if (mantissa > 0x3ff) + mantissa = 0x3ff; + + /* restore sign */ + if (negative) + mantissa = -mantissa; + + /* Convert to 5 bit exponent, 11 bit mantissa */ + return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800); +} + /* Some chips need a delay between accesses */ static inline void zl6100_wait(const struct zl6100_data *data) { @@ -65,9 +141,9 @@ static int zl6100_read_word_data(struct i2c_client *client, int page, int reg) { const struct pmbus_driver_info *info = pmbus_get_driver_info(client); struct zl6100_data *data = to_zl6100_data(info); - int ret; + int ret, vreg; - if (page || reg >= PMBUS_VIRT_BASE) + if (page > 0) return -ENXIO; if (data->id == zl2005) { @@ -83,9 +159,39 @@ static int zl6100_read_word_data(struct i2c_client *client, int page, int reg) } } + switch (reg) { + case PMBUS_VIRT_READ_VMON: + vreg = MFR_READ_VMON; + break; + case PMBUS_VIRT_VMON_OV_WARN_LIMIT: + case PMBUS_VIRT_VMON_OV_FAULT_LIMIT: + vreg = MFR_VMON_OV_FAULT_LIMIT; + break; + case PMBUS_VIRT_VMON_UV_WARN_LIMIT: + case PMBUS_VIRT_VMON_UV_FAULT_LIMIT: + vreg = MFR_VMON_UV_FAULT_LIMIT; + break; + default: + if (reg >= PMBUS_VIRT_BASE) + return -ENXIO; + vreg = reg; + break; + } + zl6100_wait(data); - ret = pmbus_read_word_data(client, page, reg); + ret = pmbus_read_word_data(client, page, vreg); data->access = ktime_get(); + if (ret < 0) + return ret; + + switch (reg) { + case PMBUS_VIRT_VMON_OV_WARN_LIMIT: + ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 9, 10)); + break; + case PMBUS_VIRT_VMON_UV_WARN_LIMIT: + ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 11, 10)); + break; + } return ret; } @@ -94,13 +200,35 @@ static int zl6100_read_byte_data(struct i2c_client *client, int page, int reg) { const struct pmbus_driver_info *info = pmbus_get_driver_info(client); struct zl6100_data *data = to_zl6100_data(info); - int ret; + int ret, status; if (page > 0) return -ENXIO; zl6100_wait(data); - ret = pmbus_read_byte_data(client, page, reg); + + switch (reg) { + case PMBUS_VIRT_STATUS_VMON: + ret = pmbus_read_byte_data(client, 0, + PMBUS_STATUS_MFR_SPECIFIC); + if (ret < 0) + break; + + status = 0; + if (ret & VMON_UV_WARNING) + status |= PB_VOLTAGE_UV_WARNING; + if (ret & VMON_OV_WARNING) + status |= PB_VOLTAGE_OV_WARNING; + if (ret & VMON_UV_FAULT) + status |= PB_VOLTAGE_UV_FAULT; + if (ret & VMON_OV_FAULT) + status |= PB_VOLTAGE_OV_FAULT; + ret = status; + break; + default: + ret = pmbus_read_byte_data(client, page, reg); + break; + } data->access = ktime_get(); return ret; @@ -111,13 +239,38 @@ static int zl6100_write_word_data(struct i2c_client *client, int page, int reg, { const struct pmbus_driver_info *info = pmbus_get_driver_info(client); struct zl6100_data *data = to_zl6100_data(info); - int ret; + int ret, vreg; - if (page || reg >= PMBUS_VIRT_BASE) + if (page > 0) return -ENXIO; + switch (reg) { + case PMBUS_VIRT_VMON_OV_WARN_LIMIT: + word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 9)); + vreg = MFR_VMON_OV_FAULT_LIMIT; + pmbus_clear_cache(client); + break; + case PMBUS_VIRT_VMON_OV_FAULT_LIMIT: + vreg = MFR_VMON_OV_FAULT_LIMIT; + pmbus_clear_cache(client); + break; + case PMBUS_VIRT_VMON_UV_WARN_LIMIT: + word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 11)); + vreg = MFR_VMON_UV_FAULT_LIMIT; + pmbus_clear_cache(client); + break; + case PMBUS_VIRT_VMON_UV_FAULT_LIMIT: + vreg = MFR_VMON_UV_FAULT_LIMIT; + pmbus_clear_cache(client); + break; + default: + if (reg >= PMBUS_VIRT_BASE) + return -ENXIO; + vreg = reg; + } + zl6100_wait(data); - ret = pmbus_write_word_data(client, page, reg, word); + ret = pmbus_write_word_data(client, page, vreg, word); data->access = ktime_get(); return ret; @@ -225,6 +378,13 @@ static int zl6100_probe(struct i2c_client *client, | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; + /* + * ZL2004, ZL9101M, and ZL9117M support monitoring an extra voltage + * (VMON for ZL2004, VDRV for ZL9101M and ZL9117M). Report it as vmon. + */ + if (data->id == zl2004 || data->id == zl9101 || data->id == zl9117) + info->func[0] |= PMBUS_HAVE_VMON | PMBUS_HAVE_STATUS_VMON; + ret = i2c_smbus_read_word_data(client, ZL6100_MFR_CONFIG); if (ret < 0) return ret; -- cgit v1.2.3